EN 13496:2002

Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes

This European Standard specifies equipment and procedures for determining the tensile strength and elongation of glass fibre meshes which are used for the reinforcement of the base coat in External Thermal Insulation Composite Systems (ETICS).

Wärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften von Glasfasergewebe

Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Zugfestigkeit und der Dehnung von Glasfasergewebe fest, das für die Armierung des Unterputzes von außenseitigen Wärmedämm-Verbundsystemen (WDVS) verwendet wird.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination des caractéristiques mécaniques des treillis de fibres de verre

La présente Norme européenne prescrit l'équipement et les modes opératoires pour déterminer la résistance à la traction et l'allongement de treillis en fibres de verre servant à renforcer la couche de base des systèmes composites d'isolation thermique par l'extérieur (ETICS).

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje mehanskih lastnosti mrežice iz steklenih vlaken

General Information

• Status: Withdrawn
• Publication Date: 22-Oct-2002
• Withdrawal Date: 08-Oct-2013
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 18 - External thermal insulation composite systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-Oct-2013
• Completion Date: 09-Oct-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 13496:2003 - Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes

Relations

• Replaced By: EN 13496:2013 - Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
• Effective Date: 04-Dec-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje mehanskih lastnosti mrežice iz steklenih vlakenWärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften von GlasfasergewebeProduits isolants thermiques destinés aux applications du bâtiment - Détermination des caractéristiques mécaniques des treillis de fibres de verreThermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13496:2002SIST EN 13496:2003en01-december-2003SIST EN 13496:2003SLOVENSKI
STANDARD



SIST EN 13496:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13496October 2002ICS 91.100.60English versionThermal insulation products for building applications -Determination of the mechanical properties of glass fibremeshesProduits isolants thermiques destinés aux applications dubâtiment - Détermination des caractéristiques mécaniquesdes treillis de fibres de verreWärmedämmstoffe für das Bauwesen - Bestimmung dermechanischen Eigenschaften von GlasfasergewebeThis European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13496:2002 ESIST EN 13496:2003



EN 13496:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions, symbols and units,.43.1Terms and definitions.43.2Symbols and units.44Principle.55Apparatus.55.1Tensile testing machine.55.2Clamps.55.3Container.56Test specimens.56.1Number of test specimens.56.2Dimensions of the test specimens.56.3Preparation of the test specimens.56.4Conditioning of the test specimens.
...