CEN ISO/TS 17429:2017
(Main)Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017)
Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017)
ISO/TS 17429:2017 specifies generic mechanisms enabling the exchange of information between ITS stations for applications related to Intelligent Transport Systems. It complies with the ITS station reference architecture (ISO 21217) and defines the following ITS station facilities layer functionalities:
- Communication Profile Handler (CPH);
- Content Subscription Handler (CSH);
- Facilities Services Handler (FSH).
These functionalities are used by ITS-S application processes (ITS-S-AP) to communicate with other ITS-S application processes and share information. These functionalities describe
- how lower-layer communication services assigned to a given data flow are applied to the service data units at the various layers in the communication protocol stack (CPH, see 6.2.3),
- how content from data dictionaries can be published and subscribed to by ITS-S application processes (CSH, see 6.2.5),
- how well-known ITS station facilities layer and management services can be applied to application process data units (FSH, see 6.2.4), relieving (ITS-S) application processes from having to implement these services on their own,
- how service access points (SAP) primitives specified in ISO 24102‑3 are used,
- service primitives for the exchange of information between ITS-S application processes and the ITS station facilities layer (FA-SAP), and
- a set of communication requirements and objectives (profiles) using the methods defined in ISO/TS 17423 to select the level of performance (best effort or real-time, etc.), confidence and security (authentication, encryption, etc.) for information exchange between ITS stations, such as data provision, event notification, roadside configuration, map update.
Intelligente Verkehrssysteme - Kooperative ITS - ITS-Stationseinrichtungen zum Informationsaustausch zwischen ITS-Stationen (ISO/TS 17429:2017)
Systèmes intelligents de transport - ITS coopératifs - Fonctionnalités des stations ITS pour le transfert d'information entre stations ITS (ISO/TS 17429:2017)
Inteligentni transportni sistemi - Kooperativni sistem (ITS) - Objekti postaj ITS za prenos podatkov med postajami ITS (ISO/TS 17429:2017)
Ta mednarodni standard je del skupine standardov o kooperativnem sistemu ITS, ki temelji na referenčni arhitekturi postaje ITS. Neobdelane in goste informacije, ki jih oddajajo postaje ITS (npr. oddajanje CAM in DENM vozil za namene varnosti v cestnem prometu) običajno zbirajo druge postaje ITS (domnevno cestna infrastruktura). Te informacije je treba obdelati in prenesti na standardiziran način med postajami ITS (načeloma med cestno infrastrukturo in prometnimi nadzornimi centri), tako da jih lahko upravljavci cest uporabljajo za namene upravljanja prometa. Obdelava teh informacij bi lahko privedla tudi do izboljšane varnosti v cestnem prometu, izboljšane učinkovitosti cest in zmanjšanja emisij toplogrednih plinov. Namen tega mednarodnega standarda je določiti profile za obdelavo zbranih informacij sprejemne postaje ITS in prenos obdelanih podatkov drugim postajam ITS za uporabe, povezane z upravljanjem, nadzorom in vodenjem prometne infrastrukture. Ta standard bo:
– določil storitve, funkcije in pričakovane rezultate,
– določil vloge in odgovornosti vseh vpletenih akterjev,
– določil povezane funkcije in vstopne točke storitve (SAP) referenčne arhitekture postaje ITS,
– opredelil, kako sprejemna postaja ITS predhodno obdeluje zbrane podatke,
– določil vsebino informacij, ki se izmenjujejo med različnimi akterji,
– opredelil raven zmogljivosti (prizadevanje za najboljšo zmogljivost ali prenos v realnem času itd.), zaupanja in varnosti (preverjanje pristnosti, šifriranje itd.) za prenos informacij,
– določil način, na katerega se obdelane informacije (varno) prenašajo med različne akterje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2017
Inteligentni transportni sistemi - Kooperativni sistem (ITS) - Objekti postaj ITS za
prenos podatkov med postajami ITS (ISO/TS 17429:2017)
Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of
information between ITS stations (ISO/TS 17429:2017)
Intelligente Transportsysteme - Kooperative Systeme - Profile zur
Informationsverarbeitung und -übertragung zwischen ITS-Stationen für Anwendungen
bezogen auf das Verkehrsinfrastruktur Management, zur Steuerung und Führung
(ISO/TS 17429:2017)
Systèmes intelligents de transport - SIT coopératifs - Installations de stations de SIT pour
le transfert d'informations entre stations SIT (ISODTS 17429:2017)
Ta slovenski standard je istoveten z: CEN ISO/TS 17429:2017
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 17429
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
April 2017
TECHNISCHE SPEZIFIKATION
ICS 03.220.01; 35.240.60
English Version
Intelligent transport systems - Cooperative ITS - ITS
station facilities for the transfer of information between
ITS stations (ISO/TS 17429:2017)
Systèmes intelligents de transport - ITS coopératifs - Intelligente Transportsysteme - Kooperative Systeme -
Fonctionnalités des stations ITS pour le transfert Profile zur Informationsverarbeitung und -
d'information entre stations ITS (ISO/TS 17429:2017) übertragung zwischen ITS-Stationen für Anwendungen
bezogen auf das Verkehrsinfrastruktur Management,
zur Steuerung und Führung (ISO/TS 17429:2017)
This Technical Specification (CEN/TS) was approved by CEN on 19 September 2016 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 17429:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 17429:2017) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 17429:2017 has been approved by CEN as CEN ISO/TS 17429:2017 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 17429
First edition
2017-03
Intelligent transport systems —
Cooperative ITS — ITS station facilities
for the transfer of information
between ITS stations
Systèmes intelligents de transport — ITS coopératifs —
Fonctionnalités des stations ITS pour le transfert d’information entre
stations ITS
Reference number
ISO/TS 17429:2017(E)
©
ISO 2017
ISO/TS 17429:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO/TS 17429:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Conformance . 4
6 Overview . 5
6.1 Motivations . 5
6.1.1 Communication services . 5
6.1.2 General purpose ITS station facilities layer services . 6
6.1.3 Information sharing services . 7
6.2 Technical specification overview . 8
6.2.1 Architecture elements . 8
6.2.2 ITS-S application processes . 9
6.2.3 Communication Profile Handler (CPH) .10
6.2.4 Facilities Services Handler (FSH) .11
6.2.5 Content Subscription Handler (CSH) .12
6.2.6 Service access points (SAP) .12
6.2.7 Application data unit and protocol data unit .12
7 General requirements .13
8 Requirements for the “ITS-S application Processes” .13
8.1 ITS-S-AP: Requirements for data transmission .13
8.2 ITS-S-AP: Requirements for publishing and subscribing to data objects .13
8.3 ITS-S-AP: Flow type registration .14
8.4 ITS-S-AP: Transmitting data .14
8.5 ITS-S-AP: Receiving data .14
8.6 ITS-S-AP: Publishing data objects .14
8.7 ITS-S-AP: Subscribing to the reception of data objects .15
8.8 ITS-S-AP: Stopping the reception of data objects .15
8.9 ITS-S-AP: Receiving data objects .15
9 Requirements for the Communication Profile Handler .15
9.1 CPH: Initialization .15
9.2 CPH: Management of communication profiles .16
9.2.1 CPH: Communication flow profile parameters .16
9.2.2 CPH: Updating communication flow profile parameters .17
9.2.3 CPH: Reporting communication flow statistics .18
9.3 CPH: Processing data sent by ITS-S application processes .18
9.3.1 CPH: Processing TransmitFlowData instructions .18
9.3.2 CPH: Checking for a corresponding communication flow profile .19
9.3.3 CPH: Checking for an available path .19
9.3.4 CPH: Performing address resolution .19
9.3.5 CPH: Checking for ITS-S facilities services .20
9.3.6 CPH: Transmission to the NF-SAP .20
10 Requirements for the Facilities Services Handler .20
10.1 FSH: Initialization .20
10.2 FSH: ITS-S facilities layer protocol data unit format (ITS-FPDU) .21
10.3 FSH: Execution of facilities services .21
10.4 FSH: Transmission to the NF-SAP .22
10.5 FSH: Reception of m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.