EN ISO 22418:2020

Intelligent transport systems - Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020)

This document specifies the fast service announcement protocol (FSAP) for general purposes in ITS. It references and supports all features of ISO/TS 16460, especially supporting the service response message (SRM) and related features in addition to the service announcement message (SAM), which enables only very basic features.
FSAP supports locally advertised ITS services uniquely identified by an ITS application identifier (ITS-AID).
This document specifies message formats and related basic protocol procedures by reference to ISO/TS 16460, and further related protocol requirements for operation of FSAP in the context of an ITS station specified in ISO 21217.
This document illustrates its relations to service announcement protocols specified by ETSI TC ITS and IEEE.

Intelligente Verkehrssysteme - Protokoll zur schnellen Bekanntgabe von Diensten (FSAP) zur allgemeinen Verwendung in ITS (ISO 22418:2020)

Systèmes de transport intelligents - Protocole d’annonce de service rapide (FSAP) (ISO 22418:2020)

Le présent document décrit le "protocole d'annonce de service rapide " (FSAP.), à des fins générales dans ITS. Il fait référence et prend en charge toutes les caractéristiques de la norme ISO/TS 16460, en particulier le message de réponse de service (SRM) et ses caractéristiques relatives en plus des messages d'annonce de service (SAM), qui permettent uniquement des fonctions très élémentaires.
Le protocole FSAP est mis en place, en soutien aux services ITS proposés par avertissement au niveau local et identifiés de manière unique par un identificateur d'application ITS (ITS-AID).
Ce document spécifie les formats des messages et les procédures de protocole de base liées conformément à l'ISO/TS 16460, ainsi que d'autres exigences de protocole connexes pour l'exploitation du FSAP dans le contexte d'une station ITS présentée par l'ISO 21217.
Ce document illustre ses relations avec les protocoles d'annonce de service spécifiés par l'ETSI TC ITS et l'IEEE.

Inteligentni transportni sistemi - Protokol objave hitre storitve (FSAP) za splošne namene v ITS (ISO 22418:2020)

General Information

• Status: Published
• Publication Date: 09-Jun-2020
• Withdrawal Date: 30-Dec-2020
• ICS: 03.220.01 - Transport in general
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 16 - Co-operative systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jun-2020
• Completion Date: 10-Jun-2020
• Directive: 2010/40/EU - Directive 2010/40/EU of the European Parliament and of the Council of 7 July 2010 on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport Text with EEA relevance
• Mandate: M/453 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of information and communication technologies to support the interoperability of co-operative for intelligent transport in the european community
• Ref Project: SIST EN ISO 22418:2020 - Intelligent transport systems - Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2020
Inteligentni transportni sistemi - Protokol objave hitre storitve (FSAP) za splošne
namene v ITS (ISO 22418:2020)
Intelligent transport systems - Fast service announcement protocol (FSAP) for general
purposes in ITS (ISO 22418:2020)
Intelligente Verkehrssysteme - Protokoll zur schnellen Bekanntgabe von Diensten
(FSAP) (ISO 22418:2020)
Systèmes de transport intelligents - Protocole d’annonce de service rapide (FSAP) (ISO
22418:2020)
Ta slovenski standard je istoveten z: EN ISO 22418:2020
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22418
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 03.220.01; 35.240.60
English Version
Intelligent transport systems - Fast service announcement
protocol (FSAP) for general purposes in ITS (ISO
22418:2020)
Systèmes de transport intelligents - Protocole Intelligente Verkehrssysteme - Protokoll zur schnellen
d'annonce de service rapide (FSAP) (ISO 22418:2020) Bekanntgabe von Diensten (FSAP) (ISO 22418:2020)
This European Standard was approved by CEN on 1 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22418:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 22418:2020) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22418:2020 has been approved by CEN as EN ISO 22418:2020 without any modification.

INTERNATIONAL ISO
STANDARD 22418
Second edition
2020-05
Intelligent transport systems — Fast
service announcement protocol
(FSAP) for general purposes in ITS
Systèmes de transport intelligents — Protocole d’annonce de service
rapide (FSAP)
Reference number
ISO 22418:2020(E)
©
ISO 2020
ISO 22418:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 22418:2020(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 General requirements . 2
6 Architecture . 4
6.1 ITS communications architecture . 4
6.2 Implementation architecture . 4
6.3 Communication roles and entities . 4
6.4 Communication phases . 5
6.4.1 Overview . 5
6.4.2 Service initialization phase . 5
6.4.3 Service operation phase . 8
6.5 Advertised services . 8
6.6 FSAP reference architecture . 9
7 Protocol elements .10
7.1 Management service access points .10
7.2 Protocol data units .10
7.2.1 General.10
7.2.2 Fast service advertisement message (FSAM) .11
7.2.3 Fast service response message (FSRM) .11
7.2.4 Secured messages .11
7.2.5 Request and response messages .12
7.3 Port numbers .12
7.4 ITS application object identifier (ITS-AID) .12
8 Protocol procedures .12
8.1 General .12
8.1.1 FSAP communication handler procedures .12
8.1.2 FSAP manager procedures .13
8.1.3 Extension elements .13
8.2 Service provider .14
8.2.1 FSAP registration .14
8.2.2 FSAP registration update .16
8.2.3 FSAP deregistration . .17
8.2.4 FSAP communication management.18
8.2.5 Transmission of FSAM . . .22
8.2.6 Reception of FSRM .22
8.3 Service user .25
8.3.1 FSAP registration .25
8.3.2 FSAP registration update .26
8.3.3 FSAP deregistration . .26
8.3.4 Reception of FSAM .27
8.4 Service operation phase .31
8.5 ITS station-internal management communications .32
8.6 Duplicate service detection .32
8.7 System service .
...