EN 13445-6:2002/A3:2008

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

Amendment to Annex D

Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit

Récipients sous pression non soumis à la flamme - Partie 6: Exigences pour la conception et la fabrication des récipients sous pression et des parties sous pression moulés en fonte à graphite sphéroïdal

Neogrevane tlačne posode - 6. del: Zahteve za konstruiranje in proizvodnjo tlačnih posod in tlačnih delov posode iz nodularne litine

General Information

• Status: Withdrawn
• Publication Date: 04-Nov-2008
• Withdrawal Date: 21-Jul-2009
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 58 - G - Nodular cast iron vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Jul-2009
• Completion Date: 22-Jul-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-6:2002/A3:2009 - Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

Relations

• Replaced By: EN 13445-6:2009 - Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• Effective Date: 22-Dec-2008
• Amends: EN 13445-6:2002 - Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-6:2002/oprA3:2007
01-september-2007
1HRJUHYDQHWODþQHSRVRGHGHO=DKWHYH]DNRQVWUXLUDQMHLQSURL]YRGQMRWODþQLK
SRVRGLQWODþQLKGHORYSRVRGHL]VLYHOLWLQHVNURJODVWLPJUDILWRP
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of
pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung
von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit
Récipients sous pression non soumis a la flamme - Partie 6: Exigences pour la
conception et la fabrication des récipients sous pression et des parties sous pression
moulés en fonte a graphite sphéroidal
Ta slovenski standard je istoveten z: EN 13445-6:2002/prA3
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-6:2002/oprA3:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN 13445-6:2002
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA3
May 2007
ICS

English Version
Unfired pressure vessels - Part 6: Requirements for the design
and fabrication of pressure vessels and pressure parts
constructed from spheroidal graphite cast iron
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die
6: Exigences pour la conception et la fabrication des Konstruktion und Herstellung von Druckbehältern und
récipients sous pression et des parties sous pression Druckbehälterteilen aus Gusseisen mit Kugelgraphit
moulés en fonte à graphite sphéroïdal
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 54.
This draft amendment A3, if approved, will modify the European Standard EN 13445-6:2002. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-6:2002/prA3:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13445-6:2002/prA3:2007 (E)
Contents Page
Foreword.3
5 Requirements.4
7 Testing and final assessment.4
Annex D (normative) Assessment of fatigue life .5
D.6.1 Pseudo-elastic stress range.5
D.6.3 Fatigue design curves.5
D.7.2 Corrections to stress range.9
D.7.3 Fatigue design curves.10
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of the EU Directive 97/23/EC.
...

SLOVENSKI STANDARD
SIST EN 13445-6:2002/A3:2009
01-april-2009
1HRJUHYDQHWODþQHSRVRGHGHO=DKWHYH]DNRQVWUXLUDQMHLQSURL]YRGQMRWODþQLK
SRVRGLQWODþQLKGHORYSRVRGHL]QRGXODUQHOLWLQH
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of
pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung
von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit
Récipients sous pression non soumis a la flamme - Partie 6: Exigences pour la
conception et la fabrication des récipients sous pression et des parties sous pression
moulés en fonte a graphite sphéroidal
Ta slovenski standard je istoveten z: EN 13445-6:2002/A3:2008
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-6:2002/A3:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-6:2002/A3:2009

---------------------- Page: 2 ----------------------

SIST EN 13445-6:2002/A3:2009
EUROPEAN STANDARD
EN 13445-6:2002/A3
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 23.020.30

English Version
Unfired pressure vessels - Part 6: Requirements for the design
and fabrication of pressure vessels and pressure parts
constructed from spheroidal graphite cast iron
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die
6: Exigences pour la conception et la fabrication des Konstruktion und Herstellung von Druckbehältern und
récipients sous pression et des parties sous pression Druckbehälterteilen aus Gusseisen mit Kugelgraphit
moulés en fonte à graphite sphéroïdal
This amendment A3 modifies the European Standard EN 13445-6:2002; it was approved by CEN on 9 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-6:2002/A3:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-6:2002/A3:2009
EN 13445-6:2002/A3:2008 (E)
Contents Page
Foreword .3
2 Normative references .4
3 Terms, definitions, units and symbols .5
4 Service conditions .5
5 Requirements .5
5.1 Materials .5
5.2 Design .6
6 Material testing .6
7 Testing and final assessment .7
Annex D (normative) Assessment of fatigue life .8
D.5 General .
...