EN ISO 16585:2002

Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Geschlossene Blindniete mit Sollbruchdorn und Flachkopf - A2/SSt (ISO 16585:2002)

Diese Internationale Norm legt Maße und mechanische Eigenschaften sowie Anwendungsdaten für geschlossene Blindniete mit Sollbruchdorn und Flachkopf, mit einer Niethülse aus austenitischem nichtrostendem Stahl (A2) und einem Nietdorn aus nichtrostendem Stahl (SSt) und mit Nenndurchmessern, d, von 3,2 mm bis 6,4 mm fest.

Rivets aveugles à rupture de tige à corps fermé, à tête bombée - A2/SSt (ISO 16585:2002)

L'ISO 16585:2002 spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps fermé, à tête bombée, avec un corps en acier inoxydable austénitique (A2) et une tige en acier inoxydable (SSt), de diamètre nominal compris entre 3,2 mm et 6,4 mm inclus.

Slepe polne kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo - A2/SSt (ISO 16585:2002)

General Information

• Status: Published
• Publication Date: 31-Oct-2002
• ICS: 21.060.40 - Rivets
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-Feb-2008
• Completion Date: 04-Feb-2008
• Ref Project: SIST EN ISO 16585:2003 - Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)

Overview

EN ISO 16585:2002 specifies dimensional, mechanical and application requirements for closed end blind rivets with a break pull mandrel and protruding head, designated A2/SSt (austenitic stainless-steel body A2 and stainless-steel mandrel SSt). The standard covers rivets with nominal diameters from 3.2 mm to 6.4 mm, including dimensions, grip ranges, material/finish, mechanical loads and acceptance criteria. This standard is identical to ISO 16585:2002 and is intended for manufacturers, designers and quality personnel working with stainless-steel blind rivets.

Key topics and requirements

• Scope and designation
  • Applies to closed end blind rivets with pull mandrel and protruding head (A2/SSt); example designation: Blind rivet ISO 16585 - 4 × × × × 12 - A2/SSt.
• Dimensions and tolerances
  • Nominal diameters: 3.2, 4.0, 4.8, 6.4 mm.
  • Key formulae (Annex A):
    • dmax = dnom + 0.08 mm; dmin = dnom − 0.15 mm
    • dk max = 2.1 × dnom (rounded to 0.1 mm)
    • kmax = 0.415 × dnom (rounded to 0.1 mm)
    • Clearance hole dh1 = dnom +0.1 mm to dnom +0.2 mm
• Grip ranges and rivet lengths
  • Recommended grip ranges for each nominal diameter and length are specified in the standard (see Table 1).
• Material and finish
  • Rivet body: austenitic stainless steel per ISO 3506-1 (A2).
  • Mandrel: stainless steel (SSt).
  • Surface finish: plain (natural).
• Mechanical properties
  • Minimum shear load, minimum tensile load and maximum mandrel break load are specified (tested per ISO 14589). Examples:
    • 3.2 mm: shear 2 000 N, tensile 2 200 N, mandrel break 4 500 N
    • 6.4 mm: shear 6 000 N, tensile 8 000 N, mandrel break 16 000 N
• Workmanship and acceptance
  • Rivets must be free from burrs, have formed heads/shanks and show no cracking at 5× magnification. Acceptance testing follows ISO 3269 unless otherwise agreed.

Applications and users

• Typical users: fastener manufacturers, design/structural engineers, procurement and quality inspectors, OEMs in automotive, aerospace, electronics, building and HVAC industries.
• Practical uses: permanent blind fastening where corrosion resistance and sealed (closed-end) joints are required - e.g., panels, enclosures, thin-sheet assemblies and inaccessible-side installation.

Related standards

• ISO 3269 - Fasteners: acceptance inspection
• ISO 3506-1 - Mechanical properties of corrosion‑resistant stainless‑steel fasteners
• ISO 14588 - Blind rivets: terminology and definitions
• ISO 14589 - Blind rivets: mechanical testing

Keywords: EN ISO 16585:2002, closed end blind rivets, A2/SSt, stainless-steel rivets, pull mandrel, protruding head, rivet dimensions, shear load, tensile load, clearance hole.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Slepe polne kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo - A2/SSt (ISO 16585:2002)Geschlossene Blindniete mit Sollbruchdorn und Flachkopf - A2/SSt (ISO 16585:2002)Rivets aveugles a rupture de tige a corps fermé, a tete bombée - A2/SSt (ISO 16585:2002)Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)21.060.40KoviceRivetsICS:Ta slovenski standard je istoveten z:EN ISO 16585:2002SIST EN ISO 16585:2003en01-julij-2003SIST EN ISO 16585:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 16585November 2002ICS 21.060.40English versionClosed end blind rivets with pull mandrel and protruding head -A2/SSt (ISO 16585:2002)Rivets aveugles à rupture de tige à corps fermé, à têtebombée - A2/SSt (ISO 16585:2002)Geschlossene Blindniete mit Sollbruchdorn und Flachkopf -A2/SSt (ISO 16585:2002)This European Standard was approved by CEN on 14 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 16585:2002 ESIST EN ISO 16585:2003

2002-12-18ForewordThis document (EN ISO 16585:2002) has been prepared by Technical Committee ISO/TC 2"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by May 2003, and conflicting national standardsshall be withdrawn at the latest by May 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of ISO 16585:2002 has been approved by CEN as EN ISO 16585:2002 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 16585:2003

Reference numberISO 16585:2002(E)© ISO 2002
INTERNATIONAL STANDARD ISO16585First edition2002-11-01Closed end blind rivets with pull mandrel and protruding head — A2/SSt Rivets aveugles à rupture de tige à corps fermé, à tête bombée — A2/SSt
ISO 16585:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.ch Printed in Switzerland
ii © ISO 2002 – All rights reserved
ISO 16585:2002(E) © ISO 2002 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also t
...