EN ISO 16584:2002

Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)

ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Offene Blindniete mit Sollbruchdorn und Flachkopf - NiCu/St oder NiCu/SST (ISO 16584:2002)

Diese Internationale Norm legt Maße und mechanische Eigenschaften sowie Anwendungsdaten für offene Blindniete mit Sollbruchdorn und Flachkopf, mit einer Niethülse aus Nickel-Kupfer-Legierung (NiCu) und einem Nietdorn aus Stahl (St) oder nichtrostendem Stahl (SSt) und mit Nenndurchmessern, d, von 3,2 mm bis 6,4 mm fest.

Rivets aveugles à rupture de tige à corps ouvert, à tête bombée - NiCu/St ou NiCu/SSt (ISO 16584:2002)

L'ISO 16584:2002 spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps ouvert, à tête bombée, avec un corps en alliage de nickel-cuivre (NiCu) et une tige soit en acier (St), soit en acier inoxydable (SSt), de diamètre nominal compris entre 3,2 mm et 6,4 mm inclus.

Slepe votle kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo - NiCu/St ali NiCu/SSt (ISO 16584:2002)

General Information

• Status: Published
• Publication Date: 31-Oct-2002
• ICS: 21.060.40 - Rivets
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-Feb-2008
• Completion Date: 04-Feb-2008
• Ref Project: SIST EN ISO 16584:2003 - Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16584:2003
01-julij-2003
Slepe votle kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo -
NiCu/St ali NiCu/SSt (ISO 16584:2002)
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt
(ISO 16584:2002)
Offene Blindniete mit Sollbruchdorn und Flachkopf - NiCu/St oder NiCu/SST (ISO
16584:2002)
Rivets aveugles a rupture de tige a corps ouvert, a tete bombée - NiCu/St ou NiCu/SSt
(ISO 16584:2002)
Ta slovenski standard je istoveten z: EN ISO 16584:2002
ICS:
21.060.40 Kovice Rivets
SIST EN ISO 16584:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16584:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 16584:2003
EUROPEAN STANDARD
EN ISO 16584
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2002
ICS 21.060.40
English version
Open end blind rivets with break pull mandrel and protruding
head - NiCu/St or NiCu/SSt (ISO 16584:2002)
Rivets aveugles à rupture de tige à corps ouvert, à tête Offene Blindniete mit Sollbruchdorn und Flachkopf -
bombée - NiCu/St ou NiCu/SSt (ISO 16584:2002) NiCu/St oder NiCu/SST (ISO 16584:2002)
This European Standard was approved by CEN on 14 October 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16584:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16584:2003
EN ISO 16584:2002 (E)
CORRECTED  2002-12-18
Foreword
This document (EN ISO 16584:2002) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2003, and conflicting national standards
shall be withdrawn at the latest by May 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16584:2002 has been approved by CEN as EN ISO 16584:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16584:2003
EN ISO 16584:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3269 2000 Fasteners - Acceptance inspection EN ISO 3269 2000
ISO 14588 2000 Blind rivets - Terminology and EN ISO 14588 2000
definitions
ISO 14589 2000 Blind rivets - Mechanical testing EN ISO 14589 2000
3

---------------------- Page: 5 ----------------------

SIST EN ISO 16584:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 16584:2003


...