EN 12467:2012

Fibre-cement flat sheets - Product specification and test methods

This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses:
-   internal wall and ceiling finishes;
-   external wall and ceiling finishes.
Products covered by this European Standard can be used for other purposes provided they comply with the relevant application standard, e.g. rigid underlays.
This European Standard covers sheets reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not cover sheets for fire protection purposes.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.

Faserzement-Tafeln - Produktspezifikation und Prüfverfahren

Dieses Dokument legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement Tafeln, Fassadenschindeln und Schalungen (nachfolgend in diesem Dokument als Tafeln bezeichnet) für einen oder mehrere der folgenden Verwendungszwecke fest:
-   Wand  und Deckenbekleidungen für Innenräume;
-   Wand  und Deckenbekleidungen für den Außenbereich.
Produkte, die unter dieses Dokument fallen, können auch für andere Zwecke eingesetzt werden, voraus-gesetzt, dass sie mit der betreffenden Anwendungsnorm übereinstimmen, z. B. steife Unterdeckplatten.
Dieses Dokument erstreckt sich auf Tafeln, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind.
Dieses Dokument gilt nicht für Tafeln, die für den Brandschutz vorgesehen sind.
Dieses Dokument enthält keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlege /Einbauverfahren, Windsogsicherheit oder Regensicherheit der verlegten/eingebauten Tafeln.

Plaques planes en fibres-ciment - Spécifications du produit et méthodes d'essai

La présente Norme européenne spécifie les exigences techniques et détermine les méthodes de contrôle et d'essai ainsi que les conditions d'acceptation pour les plaques planes en fibres- ciment, bardeaux et clins (dénommés ci-après « plaques ») pour une ou plusieurs des applications suivantes :
-   revêtements intérieurs pour murs et plafonds ;
-   revêtements extérieurs pour murs et plafonds.
Les produits couverts par la présente Norme européenne peuvent être utilisés pour d'autres applications à la condition que celles-ci soient conformes à la norme, par exemple comme substrats rigides.
La présente Norme européenne s'applique aux plaques renforcées par des fibres de différents types comme spécifié en 5.1.1.
La présente Norme européenne ne s'applique pas aux plaques conçues pour la protection contre le feu.
La présente Norme européenne n'inclut pas les calculs relatifs aux travaux, aux exigences de conception, aux techniques de pose, aux soulèvements par le vent ou à l'étanchéité à la pluie des produits déjà posés.

Vlaknato-cementne ravne plošče - Specifikacija za izdelek in preskusne metode

Ta dokument določa tehnične zahteve in metode za pregled ter preskusne metode in pogoje za sprejem za vlaknato-cementne ravne plošče, fasadne skodle in deske za eno ali več navedenih vrst uporabe: zaključki notranjih sten in stropov, zaključki zunanjih sten in stropov.

General Information

• Status: Withdrawn
• Publication Date: 18-Sep-2012
• Withdrawal Date: 05-Jul-2016
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
• Drafting Committee: CEN/TC 128/SC 4 - Fibre cement products for roofing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jul-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 12467:2013 - Fibre-cement flat sheets - Product specification and test methods

Relations

• Replaces: EN 12467:2004 - Fibre-cement flat sheets - Product specification and test methods
• Effective Date: 26-Sep-2012
• Replaces: EN 12467:2004/A2:2006 - Fibre cement flat sheets - Product specification and test methods
• Effective Date: 26-Sep-2012
• Replaces: EN 12467:2004/A1:2005 - Fibre-cement flat sheets - Product specification and test methods
• Effective Date: 26-Sep-2012
• Merged Into: EN 12467:2012+A1:2016 - Fibre-cement flat sheets - Product specification and test methods
• Effective Date: 18-Jan-2023
• Amended By: EN 12467:2012/FprA1:2015 - Fibre-cement flat sheets - Product specification and test methods
• Effective Date: 16-Jul-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserzement-Tafeln - Produktspezifikation und PrüfverfahrenPlaques planes en fibres-ciment - Spécifications du produit et méthodes d'essaiFibre-cement flat sheets - Product specification and test methods91.100.40YODNQLProducts in fibre-reinforced cementICS:Ta slovenski standard je istoveten z:EN 12467:2012SIST EN 12467:2013en,fr,de01-april-2013SIST EN 12467:2013SLOVENSKI
STANDARDSIST EN 12467:2005/A2:2006SIST EN 12467:2005/A1:2006SIST EN 12467:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12467
September 2012 ICS 91.100.40 Supersedes EN 12467:2004English Version
Fibre-cement flat sheets - Product specification and test methods
Plaques planes en fibres-ciment - Spécifications du produit et méthodes d'essai
Faserzement-Tafeln - Produktspezifikation und Prüfverfahren This European Standard was approved by CEN on 4 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12467:2012: ESIST EN 12467:2013

Consignment inspection sampling . 41Annex B (normative)
Statistical method for determining the corresponding wet values or revised dry specifications for the MOR when carrying out the dry method of test or when tested prior to coating for quality control purposes . 42B.1Procedure . 42B.2Determination of the correlation between the results of testing wet and dry specimens . 42B.3Determination of the regression line . 43B.4Determination of a value for wet testing from an obtained value for dry testing . 43B.5Determination of the minimum value specified for dry testing xstd corresponding to the minimum value specified for wet testing in this document ystd. 44Annex C (normative)
Test method for the determination of moisture movement characteristic of fibre-cement sheets . 45C.1General . 45C.2Principle. 45C.3Apparatus . 45C.4Specimen preparati
...