EN 14197-1:2003

Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements

This European Standard specifies the fundamental requirements for static non vacuum insulated cryogenic vessels designed for a maximum allowable pressure greater than 0,5 bar.
This European Standard applies to static non vacuum insulated cryogenic vessels for fluids as specified in 3.1.
For static non vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0.5 bar, this European Standard may be used as a guide.
This European Standard is not applicable to vessels built on-site.

Kryo-Behälter - Ortsfeste nicht vakuum-isolierte Behälter - Teil 1: Grundanforderungen

Anwendungsbereich
Diese Europäische Norm legt die Grundanforderungen für ortsfeste nicht vakuum-isolierte Kryo-Behälter fest, die für einen Betrieb mit einem höchstzulässigen Druck von über 0,5 bar ausgelegt sind.
Diese Europäische Norm gilt für ortsfeste nicht vakuum-isolierte Kryo-Behälter mit Fluiden, die in 3.1 definiert sind.
Für ortsfeste nicht vakuum-isolierte Kryo-Behälter, die für einen zulässigen Druck bis zu 0,5 bar ausgelegt sind, kann diese Europäische Norm als Richtlinie angewendet werden.
Diese Europäische Norm gilt nicht für vor Ort eingebaute Behälter.

Récipients cryogéniques - Récipients statiques, non isolés sous vide - Partie 1: Exigences fondamentales

La présente Norme européenne spécifie les exigences fondamentales relatives aux récipients cryogéniques statiques non isolés sous vide, conçus pour une pression maximale admissible supérieure à 0,5 bar.
La présente Norme européenne s'applique aux récipients cryogéniques statiques, non isolés sous vide destinés à contenir les fluides spécifiés en 3.1.
La présente Norme européenne peut servir de guide pour les récipients cryogéniques statiques, non isolés sous vide prévus pour une pression maximale admissible inférieure ou égale à 0,5 bar.
La présente Norme européenne ne s'applique pas aux récipients construits sur site.

Kriogene posode – Stabilne, vakuumsko neizolirane posode - 1. del: Osnovne zahteve

General Information

• Status: Published
• Publication Date: 19-Aug-2003
• Withdrawal Date: 28-Feb-2004
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: CEN/TC 268 - Cryogenic vessels
• Drafting Committee: CEN/TC 268/WG 2 - Compatibility, insulation, accessories
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Mar-2024
• Completion Date: 03-Mar-2024
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 14197-1:2004 - Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements

Relations

• Child: EN 14197-2:2003 - Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
• Effective Date: 22-Dec-2008
• Child: EN 14197-3:2004 - Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirementsKriogene posode – Stabilne, vakuumsko neizolirane posode - 1. del: Osnovne zahteveRécipients cryogéniques - Récipients statiques, non isolés sous vide - Partie 1: Exigences fondamentalesKryo-Behälter - Ortsfeste nicht vakuum-isolierte Behälter - Teil 1: GrundanforderungenTa slovenski standard je istoveten z:EN 14197-1:2003SIST EN 14197-1:2004en23.020.40ICS:SLOVENSKI
STANDARDSIST EN 14197-1:200401-junij-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14197-1August 2003ICS 23.020.40English versionCryogenic vessels - Static non-vacuum insulated vessels - Part1: Fundamental requirementsProduits cryogéniques - Récipients fixes, non isolés sousvide - Partie 1: Exigences fondamentalesKryo-Behälter - Ortsfeste nicht vakuum-isolierte Behälter -Teil 1: GrundanforderungenThis European Standard was approved by CEN on 2 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14197-1:2003 E



EN 14197-1:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44General requirements.75Mechanical loads.75.1General.75.2Load during the pressure test.75.3Other mechanical loads.76Corrosion effects.87Thermal loads.88Material.88.1General.88.2Selection of materials.88.3Inspection certificate.88.4Materials for equipment.99Design, fabrication, inspection and testing.910Marking.
...