Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)

ISO 7042:2012 specifies the characteristics of prevailing torque type all-metal hexagon high nuts with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8, 10 and 12.

Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) - Festigkeitsklassen 5, 8, 10 und 12 (ISO 7042:2012)

Diese Internationale Norm legt die Eigenschaften von hohen Sechskantmuttern mit Klemmteil (Ganzmetall-muttern) mit Gewinde M5 bis M36, in Produktklasse A für Gewinde bis M16 und Produktklasse B für Gewinde über M16, und mit Festigkeitsklassen 5, 8, 10 und 12 fest.
ANMERKUNG 1   Die Maße der Muttern entsprechen den in ISO 4033 angegebenen Maßen, mit Ausnahme der Maße mw und hmax.
ANMERKUNG 2   Muttern mit Festigkeitsklasse 9 werden in ISO 7720 behandelt.
Werden andere Festlegungen benötigt, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 724, ISO 898 2, ISO 965 2, ISO 2320 und ISO 4759 1.

Écrous hexagonaux hauts autofreinés tout métal - Classes de qualité 5, 8, 10 et 12 (ISO 7042:2012)

L'ISO 7042:2012 spécifie les caractéristiques des écrous hexagonaux hauts autofreinés tout métal, de diamètre de filetage M5 à M 36 inclus, de grade A pour les filetages jusqu'à M16 et de grade B pour les filetages supérieurs à M16, et de classes de qualité 5, 8, 10 et 12.

Visoke šestrobe zaščitne matice z deformacijo - Razredi trdnosti 5, 8, 10 in 12 (ISO 7042:2012)

Ta mednarodni standard določa značilnosti visokih šestrobih zaščitnih matic z deformacijo z navoji od M5 do vključno M36, v razredu izdelave A za navoje do vključno M16 in v razredu izdelave B za navoje nad M16, ter z razredi trdnosti 5, 8, 10 in 12. Če so zahtevane druge specifikacije, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 in ISO 4759-1.

General Information

Status
Published
Publication Date
18-Dec-2012
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
19-Dec-2012
Completion Date
19-Dec-2012

Relations

Buy Standard

Standard
EN ISO 7042:2013
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7042:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 7042:2001

9LVRNHãHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMR5D]UHGLWUGQRVWLLQ ,62



Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12

(ISO 7042:2012)

Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) - Festigkeitsklassen 5, 8, 10

und 12 (ISO 7042:2012)

Écrous hexagonaux hauts autofreinés tout métal - Classes de qualité 5, 8, 10 et 12 (ISO

7042:2012)
Ta slovenski standard je istoveten z: EN ISO 7042:2012
ICS:
21.060.20 Matice Nuts
SIST EN ISO 7042:2013 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7042:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 7042:2013
EUROPEAN STANDARD
EN ISO 7042
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 7042:1997
English Version
Prevailing torque type all-metal hexagon high nuts - Property
classes 5, 8, 10 and 12 (ISO 7042:2012)

Écrous hexagonaux hauts autofreinés tout métal - Classes Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ

de qualité 5, 8, 10 et 12 (ISO 7042:2012) 2 - Festigkeitsklassen 5, 8, 10 und 12 (ISO 7042:2012)

This European Standard was approved by CEN on 3 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7042:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7042:2013
EN ISO 7042:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 7042:2013
EN ISO 7042:2012 (E)
Foreword

This document (EN ISO 7042:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in

collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at

the latest by June 2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 7042:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 7042:2012 has been approved by CEN as a EN ISO 7042:2012 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 7042:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 7042:2013
INTERNATIONAL ISO
STANDARD 7042
Third edition
2012-12-15
Prevailing torque type all-metal
hexagon high nuts — Property classes
5, 8, 10 and 12
Écrous hexagonaux hauts autofreinés tout métal — Classes de qualité
5, 8, 10 et 12
Reference number
ISO 7042:2012(E)
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 7042:2013
ISO 7042:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s

member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7042:2013
ISO 7042:2012(E)
Contents Page

Foreword ............................................................................................................................................................................iv

1 Scope ...................................................................................................................................................................... 1

2 Normative references ......................................................................................................................................... 1

3 Dimensions ........................................................................................................................................................... 2

4 Requirements and reference International Standards .............................................................................. 3

5 Designation ........................................................................................................................................................... 3

Bibliography ............................................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.