EN 4072:2009

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

This standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated.
Classification: 1 100 MPa  ) / 425 °C  )

Luft- und Raumfahrt - 100°-Senk-Passschrauben, mit Flügelkreuzschlitz, kurzes Gewinde, aus Titanlegierung, Aluminium-IVD-beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °C

Diese Norm legt die Eigenschaften von 100 °-Senk-Passschrauben mit Flügelkreuzschlitz und kurzem Gewinde, aus Titanlegierung, Aluminium-IVD-beschichtet, fest.
Klasse: 1 000 MPa )/425 °C )

Série aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée, fût normal à tolérance serrée, filetage court, en alliage de titane, revêtues aluminium IVD - Classification : 1 100 MPa (à température ambiante) / 425 °C

Aeronavtika - Vijaki, 100° ugreznjena glava, križna zareza, polno steblo, ozka toleranca, kratek navoj, iz titanove zlitine, prevlečene z aluminijem IVD - Klasifikacija: 1100 MPa (pri temperaturi okolice)/425 °C

General Information

• Status: Withdrawn
• Publication Date: 21-Jul-2009
• Withdrawal Date: 22-Mar-2016
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4072:2009 - Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C

Relations

• Replaced By: EN 4072:2016 - Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - 100° Senkschrauben, mit Flügelkreuzschlitz, kurzes Gewinde, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1100 MPa (bei Raumtemperatur)/425 °CSérie aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée, fût normal à tolérance serrée, filetage court, en alliage de titane, revêtues aluminium IVD - Classification: 1100 MPa (à température ambiante)/425 °CAerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studs49.025.30TitanTitanium49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4072:2009SIST EN 4072:2009en,de01-oktober-2009SIST EN 4072:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4072
July 2009 ICS 49.030.20 English Version
Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
Série aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée, fût normal à tolérance serrée, filetage court, en alliage de titane, revêtues aluminium IVD - Classification : 1 100 MPa (à température ambiante) / 425 °C
Luft- und Raumfahrt – 100°-Senk-Passschrauben, mit Flügelkreuzschlitz, kurzes Gewinde, aus Titanlegierung, Aluminium-IVD-beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °C This European Standard was approved by CEN on 13 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4072:2009: ESIST EN 4072:2009
...