EN ISO 22007-1:2012

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)

ISO 22007-1:2009 describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. Different techniques are available for these measurements and some may be better suited than others for a particular type, state and form of material. ISO 22007-1 provides a broad overview of these techniques. Standards specific to these techniques, as referenced in ISO 22007-1, are used for the actual test methods.

Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 1: Allgemeine Grundlagen (ISO 22007-1:2009)

Dieser Teil von ISO 22007 beschreibt die Grundlagen für Verfahren zur Bestimmung der Wärmeleitfähigkeit und Temperaturleitfähigkeit polymerer Materialien. Für diese Messungen stehen unterschiedliche Verfahren zur Verfügung, und für einen bestimmten Materialtyp, eine bestimmte Materialbeschaffenheit oder  form können einige Verfahren geeigneter als andere sein. Dieser Teil von ISO 22007 gibt einen umfassenden Überblick über diese Verfahren. Die für diese Verfahren entwickelten Normen werden entsprechend den Verweisungen in diesem Teil von ISO 22007 für die Durchführung des jeweiligen Prüfverfahrens angewendet.

Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 1: Principes généraux (ISO 22007-1:2009)

L'ISO 22007-1:2009 décrit les principes de base des méthodes permettant de déterminer la conductivité thermique et la diffusivité thermique des matériaux polymères. Différentes techniques de mesurage sont disponibles et certaines peuvent être mieux adaptées que d'autres pour un type, un état et une forme particuliers du matériau. L'ISO 22007-1 donne un aperçu général de ces techniques. Les normes propres à ces techniques, telles que mentionnées dans l'ISO 22007-1, sont utilisées pour la mise en œuvre de la méthode d'essai réelle.

Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti - 1. del: Splošna načela (ISO 22007-1:2009)

Ta del standarda ISO 22007 opisuje ozadje metod za ugotavljanje toplotne prevodnosti in toplotne razprševalnosti polimernih materialov. Za te meritve so na voljo različne tehnike, pri čemer so nekatere lahko primernejše od drugih za posamezno vrsto, stanje in obliko materiala. Ta del standarda ISO 22007 vsebuje obsežen pregled teh tehnik. Za izvajanje dejanske preskusne metode se uporabljajo standardi za te tehnike, kakor je opisano v tem delu standarda ISO 22007.

General Information

• Status: Withdrawn
• Publication Date: 24-Jan-2012
• Withdrawal Date: 28-Nov-2017
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Nov-2017
• Ref Project: SIST EN ISO 22007-1:2012 - Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)

Relations

• Replaced By: EN ISO 22007-1:2017 - Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
• Effective Date: 06-Dec-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22007-1:2012
01-marec-2012
3ROLPHUQLPDWHULDOL8JRWDYOMDQMHWRSORWQHSUHYRGQRVWLLQWRSORWQHUD]SUãHYDOQRVWL
GHO6SORãQDQDþHOD,62
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General
principles (ISO 22007-1:2009)
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 1:
Allgemeine Grundlagen (ISO 22007-1:2009)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique -
Partie 1: Principes généraux (ISO 22007-1:2009)
Ta slovenski standard je istoveten z: EN ISO 22007-1:2012
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 22007-1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 22007-1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 22007-1:2012


EUROPEAN STANDARD
EN ISO 22007-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2012
ICS 83.080.01
English Version
Plastics - Determination of thermal conductivity and thermal
diffusivity - Part 1: General principles (ISO 22007-1:2009)
Plastiques - Détermination de la conductivité thermique et Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der
de la diffusivité thermique - Partie 1: Principes généraux Temperaturleitfähigkeit - Teil 1: Allgemeine Grundlagen
(ISO 22007-1:2009) (ISO 22007-1:2009)
This European Standard was approved by CEN on 24 December 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22007-1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 22007-1:2012
EN ISO 22007-1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 22007-1:2012
EN ISO 22007-1:2012 (E)
Foreword
The text of ISO 22007-1:2009 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 22007-1:2012 by
Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the
latest by July 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22007-1:2009 has been approved by CEN as a EN ISO 22007-1:2012 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 22007-1:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 22007-1:2012

INTERNATIONAL ISO
STANDARD 22007-1
First edition
2009-07-01


Plastics — De
...