EN ISO 6158:2004

Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2004)

ISO 6158:2004 specifies requirements for electroplated coatings of chromium, with or without undercoats, on ferrous and non-ferrous metals for engineering purposes.
The coating designation provides a means of specifying the thickness of chromium appropriate for typical engineering applications.

Metallische Überzüge - Galvanische Chromüberzüge für technische Zwecke (ISO 6158/2004)

Diese Internationale Norm enthält Anforderungen für galvanische Chromüberzüge, mit und ohne Zwischen-überzügen, die auf Eisenwerkstoffen oder Nichteisenmetallen für technische Zwecke abgeschieden werden. Die Bezeichnung der Überzüge erlaubt es, die Dicke des Chroms, das für typische technische Anwendungen geeignet ist, festzulegen.

Revêtements métalliques - Dépôts électrolytiques de chrome pour usages industriels (ISO 6158:2004)

L'ISO 6158:2004 spécifie les exigences relatives aux dépôts électrolytiques de chrome, avec ou sans sous-couches, sur les métaux de base ferreux et non ferreux, pour usages industriels.
La désignation des revêtements permet de spécifier l'épaisseur de chrome appropriée pour les applications industrielles courantes.

Kovinske prevleke – Galvanske prevleke kroma za tehnično uporabo (ISO 6158:2004)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2004
• Withdrawal Date: 14-Jul-2011
• ICS: 25.220.40 - Metallic coatings
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 4 - Electroplated and autocatalytic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jul-2011
• Completion Date: 15-Jul-2011
• Ref Project: SIST EN ISO 6158:2004 - Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2004)

Relations

• Replaced By: EN ISO 6158:2011 - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011)
• Effective Date: 23-Jul-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6158:2004
01-september-2004
.RYLQVNHSUHYOHNH±*DOYDQVNHSUHYOHNHNURPD]DWHKQLþQRXSRUDER,62

Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO
6158:2004)
Metallische Überzüge - Galvanische Chromüberzüge für technische Zwecke (ISO
6158/2004)
Revetements métalliques - Dépôts électrolytiques de chrome pour usages industriels
(ISO 6158:2004)
Ta slovenski standard je istoveten z: EN ISO 6158:2004
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 6158:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6158:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 6158:2004

---------------------- Page: 3 ----------------------

SIST EN ISO 6158:2004

---------------------- Page: 4 ----------------------

SIST EN ISO 6158:2004


INTERNATIONAL ISO
STANDARD 6158
Second edition
2004-05-15


Metallic coatings — Electrodeposited
coatings of chromium for engineering
purposes
Revêtements métalliques — Dépôts électrolytiques de chrome pour
usages industriels




Reference number
ISO 6158:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 6158:2004
ISO 6158:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 6158:2004
ISO 6158:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Information to be supplied to the electroplater .2
5 Designation. 3
6 Requirements . 5
7 Sampling . 8
Annex A (informative) Typical thickness of chromium specified in engineering applications. 9
Annex B (informative) Thickness test methods for electroplated chromium and other metallic
coatings . 10
Annex C (normative) Determination of cracks and pores in chromium coatings . 11
Bibliography .
...