EN ISO 8495:2004

Metallic materials - Tube - Ring-expanding test (ISO 8495:1998)

WI created following Res COCOR 10/2001: approval of ECISS/TC 29 business plan (CC/010719)

Metallische Werkstoffe - Rohr - Ringaufdornversuch (ISO 8495:1998)

In dieser Internationalen Norm ist ein Verfahren für den Ringaufdornversuch an Rohren festgelegt, um Fehler an der Oberfläche und in der Rohrwand zu erkennen, indem die Probe unter Verwendung eines konischen Dorns soweit aufgeweitet wird, bis sie zu Bruch geht. Die Prüfung darf auch zur Bestimmung der plastischen Umformbarkeit von Rohren verwendet werden.
Der Ringaufdornversuch ist auf Rohre anwendbar, die einen Außendurchmesser von 18 mm bis einschließlich 150 mm und Wanddicken von 2 mm bis einschließlich 16 mm haben.

Matériaux métalliques - Tubes - Essai de dilatation d'anneaux (ISO 8495:1998)

Kovinski materiali - Cev - Preskus širjenja s trnom (ISO 8495:1998)

General Information

• Status: Withdrawn
• Publication Date: 20-Jul-2004
• Withdrawal Date: 19-Nov-2013
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 9 - Mechanical testing of tubes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Nov-2013
• Completion Date: 20-Nov-2013
• Ref Project: SIST EN ISO 8495:2004 - Metallic materials - Tube - Ring-expanding test (ISO 8495:1998)

Relations

• Replaces: EN 10236:1993 - Metallic materials - Tube - Ring expanding test
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 8495:2013 - Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
• Effective Date: 27-Nov-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2004
1DGRPHãþD
SIST EN 10236:1998
Kovinski materiali - Cev - Preskus širjenja s trnom (ISO 8495:1998)
Metallic materials - Tube - Ring-expanding test (ISO 8495:1998)
Metallische Werkstoffe - Rohr - Ringaufdornversuch (ISO 8495:1998)
Matériaux métalliques - Tubes - Essai de dilatation d'anneaux (ISO 8495:1998)
Ta slovenski standard je istoveten z: EN ISO 8495:2004
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8495
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 77.040.10 Supersedes EN 10236:1993
English version
Metallic materials - Tube - Ring-expanding test (ISO 8495:1998)
Matériaux métalliques - Tubes - Essai de dilatation Metallische Werkstoffe - Rohr - Ringaufdornversuch (ISO
d'anneaux (ISO 8495:1998) 8495:1998)
This European Standard was approved by CEN on 1 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8495:2004: E
worldwide for CEN national Members.

Foreword
The text of ISO 8495:1998 has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals” of the International Organization for Standardization (ISO) and
has been taken over as EN ISO 8495:2004 by Technical Committee ECISS/TC 29 "Steel
tubes and fittings for steel tubes", the secretariat of which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.

This document supersedes EN 10236:1993.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 8495:1998 has been approved by CEN as EN ISO 8495:2004 without any
modifications.
INTERNATIONAL ISO
STANDARD 8495
Second edition
1998-11-01
Metallic materials — Tube —
Ring-expanding test
Matériaux métalliques — Tubes — Essai de dilatation d’anneaux
A
Reference number
ISO 8495:1998(E)
ISO 8495:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for v
...