EN 14488-2:2006
(Main)Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
This part specifies two methods from which an estimate of the in situ compressive strength of young hardened sprayed concrete can be made
Prüfung von Spritzbeton - Teil 2: Druckfestigkeit von jungem Spritzbeton
Diese Norm legt zwei Verfahren fest, nach denen die Druckfestigkeit von jungem Spritzbeton abgeschätzt werden kann.
Essais pour béton projeté - Partie 2 : Résistance à la compression au jeune âge du béton projeté
La présente norme spécifie deux méthodes à partir desquelles il est possible d’effectuer une estimation de la résistance à la compression sur chantier au jeune âge du béton durci projeté.
Preskušanje brizganega betona – 2. del: Tlačna trdnost svežega brizganega betona
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Testing sprayed concrete - Part 2: Compressive strength of young sprayed concreteL]JDQHJDEHWRQDEssais pour béton projeté - Partie 2 : Résistance a la compression au jeune âge du béton projetéPrüfung von Spritzbeton - Teil 2: Druckfestigkeit von jungem SpritzbetonTa slovenski standard je istoveten z:EN 14488-2:2006SIST EN 14488-2:2006en91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 14488-2:200601-oktober-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14488-2June 2006ICS 91.100.30 English VersionTesting sprayed concrete - Part 2: Compressive strength ofyoung sprayed concreteEssais pour béton projeté - Partie 2 : Résistance à lacompression au jeune âge du béton projetéPrüfung von Spritzbeton - Teil 2: Druckfestigkeit vonjungem SpritzbetonThis European Standard was approved by CEN on 3 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14488-2:2006: E
EN 14488-2:2006 (E) 2 Contents Foreword.3 1 Scope.4 2 Principle.4 2.1 General.4 2.2 Method A: Penetration needle.4 2.3 Method B: Stud driving.4 3 Apparatus.4 3.1 Method A: Penetration needle.4 3.2 Method B: Stud driving.4 4 Test specimen.5 5 Procedures.5 5.1 Method A: Penetration needle.5 5.2 Method B: Stud driving.5 6 Expression of results.7 6.1 Method A: Penetration needle.7 6.2 Method B: Stud driving.7 7 Test report.8 7.1 Metho
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.