EN 14428:2015

Shower enclosures - Functional requirements and test methods

This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.
NOTE   For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Duschabtrennungen - Funktionsanforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen an Duschabtrennungen für den Hausgebrauch fest, die sicherstellen, dass das nach den Einbauanweisungen des Herstellers eingebaute Produkt für den vorgesehenen Verwendungszweck eine zufrieden stellende Gebrauchstauglichkeit aufweist.
Dieses Dokument gilt nicht für Einfachduschkabinen oder Duschvorhänge und legt keine ästhetischen und maßlichen Anforderungen fest.
ANMERKUNG   Der Begriff für den "Hausgebrauch" in dieser Norm schließt die Verwendung in Hotels, Studenten-wohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein; ausgenommen ist die medizinische Verwendung.

Parois de douche - Prescriptions fonctionnelles et méthodes d'essai

Le présent document spécifie les prescriptions relatives aux parois de douche à usage domestique assurant que le produit, lorsqu’il est installé conformément aux instructions d’installation du fabricant, fonctionne de manière satisfaisante pour l’usage prévu.
Le présent document ne s’applique pas aux cabines de douche ou aux rideaux de douche et ne spécifie pas de prescriptions esthétiques et dimensionnelles. La présente norme ne concerne pas non plus les parois de douche en verre de sécurité feuilleté.
NOTE   Pour les besoins du présent document, l’expression « à usage domestique » comprend les utilisations dans les hôtels, les logements d’étudiants, les hôpitaux et les bâtiments similaires, sauf lorsque des dispositions spéciales médicales sont requises.

Zasloni za prhanje - Funkcionalne zahteve in preskusne metode

Ta dokument določa zahteve za zaslone za prhanje za domačo uporabo, ki zagotavljajo, da izdelek, ki je vgrajen v skladu z navodili proizvajalca za vgradnjo, pri načrtovani uporabi deluje zadovoljivo.
Ta dokument se ne uporablja za omarice ali zavese za prhanje ter ne določa estetskih in dimenzijskih zahtev.

General Information

• Status: Withdrawn
• Publication Date: 26-May-2015
• Withdrawal Date: 30-Oct-2018
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: CEN/TC 163 - Sanitary appliances
• Drafting Committee: CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 31-Oct-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
• Ref Project: SIST EN 14428:2015 - Shower enclosures - Functional requirements and test methods

Relations

• Replaces: EN 14428:2004+A1:2008 - Shower enclosures - Functional requirements and test methods
• Effective Date: 08-Jun-2022
• Merged Into: EN 14428:2015+A1:2018 - Shower enclosures - Functional requirements and test methods
• Effective Date: 13-Jun-2018
• Amended By: EN 14428:2015/prA1:2017 - Shower enclosures - Functional requirements and test methods
• Effective Date: 12-Oct-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zasloni za prhanje - Funkcionalne zahteve in preskusne metodeDuschabtrennungen - Funktionsanforderungen und PrüfverfahrenParois de douche - Prescriptions fonctionnelles et méthodes d'essaiShower enclosures - Functional requirements and test methods91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 14428:2015SIST EN 14428:2015en,fr,de01-september-2015SIST EN 14428:2015SLOVENSKI
STANDARDSIST EN 14428:2005+A1:20081DGRPHãþD



SIST EN 14428:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14428
May 2015 ICS 91.140.70 Supersedes EN 14428:2004+A1:2008English Version
Shower enclosures - Functional requirements and test methods Parois de douche - Prescriptions fonctionnelles et méthodes d'essai
Duschabtrennungen - Funktionsanforderungen und Prüfverfahren This European Standard was approved by CEN on 19 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14428:2015 ESIST EN 14428:2015



EN 14428:2015 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Requirements .6 4.1 General .6 4.2 Cleanability .6 4.3 Impact resistance/shatter properties .6 4.3.1 General .6 4.3.2 Thermally toughened safety glass .6 4.3.3 Laminated safety glass .6 4.3.4 Plastics materials.6 4.4 Durability .6 4.4.1 General .6 4.4.2 Corrosion resistance .7 4.4.3 Resistance to chemicals and stains .7 4.4.4 Resistance to wet and dry cycling .
...