EN 14428:2004+A1:2008

Shower enclosures - Functional requirements and test methods

This document specifies requirements for shower enclosures for domestic purposes which ensure that the product,
when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when
used as intended.
This document does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional
requirements.
NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for
students, hospitals and similar buildings, except when special medical provisions are required.

Duschabtrennungen - Funktionsanforderungen und Prüfverfahren

Dieses Dokument legt Anforderungen an Duschabtrennungen für den Hausgebrauch fest, die sicherstellen, dass das nach den Einbauanweisungen des Herstellers eingebaute Produkt für den vorgesehenen Verwendungszweck eine zufrieden stellende Gebrauchstauglichkeit aufweist.
Dieses Dokument gilt nicht für Komplettduschen oder Duschvorhänge und legt keine ästhetischen und maßlichen Anforderungen fest.
ANMERKUNG   Der Begriff "für den Hausgebrauch" in dieser Norm schließt die Verwendung in Hotels, Studenten-wohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein; ausgenommen ist die medizinische Verwendung.

Parois de douche - Prescriptions fonctionnelles et méthodes d'essai

La présente Norme européenne spécifie les exigences relatives aux parois de douche à usage domestique assurant que le produit, lorsqu’il est installé conformément aux instructions d’installation du fabricant, fonctionne de manière satisfaisante pour l’usage prévu.
La présente norme ne concerne pas les cabines de douche complètes ou les rideaux de douche et ne spécifie pas d’exigences esthétiques et dimensionnelles.
NOTE   Pour les besoins de la présente norme l’expression «à usage domestique» comprend les utilisations dans les hôtels, les logements d’étudiants, les hôpitaux et bâtiments similaires, sous réserve de dispositions médicales spéciales.

Zasloni za prhanje - Funkcionalne zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 22-Jan-2008
• Withdrawal Date: 26-May-2015
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: CEN/TC 163 - Sanitary appliances
• Drafting Committee: CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-May-2015
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
• Ref Project: SIST EN 14428:2005+A1:2008 - Shower enclosures - Functional requirements and test methods

Relations

• Merged From: EN 14428:2004 - Shower enclosures - Functional requirements and test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 14428:2015 - Shower enclosures - Functional requirements and test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Shower enclosures - Functional requirements and test methodsZasloni za prhanje - Funkcionalne zahteve in preskusne metodeParois de douche - Prescriptions fonctionnelles et méthodes d'essaiDuschabtrennungen - Funktionsanforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14428:2004+A1:2008SIST EN 14428:2005+A1:2008en,fr,de91.140.70ICS:SLOVENSKI
STANDARDSIST EN 14428:2005+A1:200801-marec-2008

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14428:2004+A1
January 2008 ICS 91.140.70 Supersedes EN 14428:2004 English Version
Shower enclosures - Functional requirements and test methods Parois de douche - Prescriptions fonctionnelles et méthodes d'essai
Duschabtrennungen - Funktionsanforderungen und Prüfverfahren This European Standard was approved by CEN on 2 September 2004 and includes Amendment 1 approved by CEN on 24 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14428:2004+A1:2008: E

!!!!Relationship between this European Standard and the essential Requirements of EU Directive 89/106/EEC, EU Construction Products Directive.32 ZA.1 Scope and relevant characteristics.32 ZA.2 Procedure for attestation of conformity of shower enclosures.33 ZA.2.1 System of attestation of conformity.33 ZA.2.2 Declaration of conformity.33 ZA.3 CE marking.34 !!!!Bibliography.36
...