iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10223-5:1998

(Main)

Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing

Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing

This part of this European Standard specifies preferred dimensions, properties and coatings of zinc and zinc alloy coated steel wire woven hinged joint and knotted mesh fencing.

Stahldraht und Erzeugnisse aus Stahldraht für Zäune - Teil 5: Gelenk- und Knotengitter aus Stahldraht für Zäune

Dieser Teil der vorliegenden Europäischen Norm legt bevorzugte Maße, Eigenschaften und Überzüge aus Zink und Zinklegierungen für Gelenk- und Knotengitter aus Stahldraht für Zäune fest.

Fils et produits tréfilés en acier pour clôtures et grillages - Partie 5: Grillage noué en acier pour le bétail

La présente partie de la norme européenne spécifie les dimensions, caractéristiques et revêtement de zinc et d'alliage de zinc préférentiels des grillages noués en acier pour le bétail.

Jeklena žica in žični izdelki za ograje - 5. del: Kolenčasto in vozlasto tkana jeklena žična mreža

General Information

Status
Withdrawn
Publication Date
17-Mar-1998
Withdrawal Date
27-Nov-2012
ICS
77.140.65 - Steel wire, wire ropes and link chains
Technical Committee
ECISS/TC 106 - Wire rod and wires
Drafting Committee
ECISS/TC 30 - Steel wires
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Nov-2012
Completion Date
28-Nov-2012
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
Ref Project
SIST EN 10223-5:2000 - Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing

Relations

Replaced By
EN 10223-5:2012 - Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing
Effective Date
05-Dec-2012

Buy Standard

EN 10223-5:2000EN 10223-5:2000
PreviousNext
Standard
EN 10223-5:2000
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Erzeugnisse aus Stahldraht für Zäune - Teil 5: Gelenk- und Knotengitter aus Stahldraht für ZäuneFils et produits tréfilés en acier pour clôtures et grillages - Partie 5: Grillage noué en acier pour le bétailSteel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verig
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10264-3:2023(Main)
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
SIST EN 10264-3:2024

This document specifies round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications. Heavy duty refers to situations where the stresses applied to the rope are either high or vary by a large amount during service.
This document refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T).
It does not apply to steel wire taken from manufactured ropes.
This document specifies the following for cold drawn non alloyed steel wire for ropes for high duty applications:
-   dimensional tolerances;
-   mechanical characteristics;
-   requirements relating to the chemical composition of the steel wire;
-   conditions to be satisfied by any coating.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10244-2:2023(Main)
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
SIST EN 10244-2:2023

This document specifies the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10264-2:2021(Main)
Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications
SIST EN 10264-2:2022

This part of EN 10264 defines cold drawn non alloy steel wire used for the manufacture of:
-   ropes for general applications and lifts;
-   ropes for applications for which there is no specific European Standard.
This part of EN 10264 does not apply to steel wire taken from manufactured ropes.
This part of EN 10264 specifies the following for cold drawn non alloy steel wire for ropes for general applications:
-   dimensional tolerances;
-   mechanical characteristics;
-   requirements relating to the chemical composition of the steel wire;
-   conditions to be satisfied by any coating.
In addition to the requirements of this part of EN 10264, the requirements of EN 10264-1 also apply.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-5:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
SIST EN 10263-5:2018

1.1   This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.2   EN 10263 1 is indispensable for the application of this part of EN 10263.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-4:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
SIST EN 10263-4:2018

1.1   This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-1:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
SIST EN 10263-1:2018

1.1   This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a)   non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b)   non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013;
c)   non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013;
d)   stainless steels, as specified in prEN 10263-5:2013.
1.2   Parts 2,3 and 4 of this EN 10263 cover products having a diameter up to and including 100 mm.
Part 5 covers products having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.3   In special cases supplementary requirements or deviations with respect to this European Standard may be agreed between the purchaser and the supplier at the time of enquiry and order (See Annex A).
1.4   The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-3:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
SIST EN 10263-3:2018

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10263-2:2017(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
SIST EN 10263-2:2018

1.1   This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16120-4:2017(Main)
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2017)
SIST EN ISO 16120-4:2017

ISO 16120-4:2017 specifies requirements for wire rod for conversion to wire for special applications. It is applicable to non-alloy steel wire rod with improved characteristics intended for drawing and/or cold rolling.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16120-1:2017(Main)
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
SIST EN ISO 16120-1:2017

ISO 16120-1:2017 series is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.
ISO 16120-1:2017 specifies general requirements for non-alloy steel wire rod for conversion to wire. It is not applicable to products for which standards exist or are in development, for example:
-      steel wire rod intended for heat treatment;
-      free-cutting steel wire rod;
-      steel wire rod for cold heading and cold extrusion;
-      steel wire rod intended for the production of electrodes and products for welding;
-      steel wire rod for welded fabric for reinforcement for concrete;
-      steel wire rod for ball and roller bearings (see ISO 683‑17);
-      steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.
In addition to the requirements of this document, the general technical delivery requirements specified in ISO 404 apply.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    German language
    sale 10% off
    e-Library read for
    1 day