EN 13090:2000
(Main)Means for resealing threaded joints of gas pipework in buildings
Means for resealing threaded joints of gas pipework in buildings
This European Standard specifies the properties and the test methods of sealants used to reseal threaded joints of metallic gas pipework in buildings operated at a maximum allowed operating pressure of 100 mbar (such sealants hereafter are referred to as "sealants"). Note Gas pipework in buildings is in accord ance with EN 1775 the pipework between the point of delivery and the inlet connection to the gas appliance.
Mittel zum nachträglichen Abdichten von Gewindeverbindungen in Gas-Leitungsinstallationen in Gebäuden
Diese Europäische Norm legt die Eigenschaften und Prüfverfahren von Mitteln fest, die zum nachträglichen Abdichten von Verbindungen in Gas-Leitungsinstallationen in Gebäuden mit einem maximalen Betriebsdruck von 100mbar dienen (derartige Dichtmittel werden im folgenden als "Dichtmittel" bezeichnet). Anmerkung: Gas-Leitungsinstallationen in Gebäuden sind in Übereinstimmung mit prEN1775 die Leitungsinstallationen zwischen der Gas-Übergabestelle und der Geräteeingangsverbindung.
Matériaux pour la réétanchéité des raccords filetés des tuyauteries de gaz dans les bâtiments
La présente norme européenne spécifie les propriétés et méthodes d'essai des produits d'étanchéité utilisés pour refaire l'étanchéité des raccords filetés des tuyauteries métallique de gaz dans les bâtiments soumis à une pression de service maximale admise de 100 mbar (ces produits d'étanchéité sont désignés ci-aprèssous le terme de "produits d'étanchéité"). Note: Conformément à l'EN 1775, unetuyauterie de gaz dans les bâtiments est une tuyauterie reliant le point de livraison et le raccord d'arrivée de l'appareil à gaz.
Sredstva za pretesnitev navojnih spojev pri plinski napeljavi v stavbah
General Information
- Status
- Published
- Publication Date
- 17-Oct-2000
- Withdrawal Date
- 29-Apr-2001
- Technical Committee
- CEN/TC 208 - Elastomeric seals for joints in pipework and pipelines
- Current Stage
- 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
- Start Date
- 04-Jun-2018
- Completion Date
- 04-Jun-2018
Overview - EN 13090:2000 (CEN)
EN 13090:2000 is a European standard published by CEN that defines the requirements for sealants used to reseal threaded joints of metallic gas pipework in buildings. The standard specifies the properties and the test methods that such sealants must meet for use on gas installations operated at a maximum allowed operating pressure of 100 mbar. It applies to gas pipework as defined in EN 1775 (pipework between the point of delivery and the inlet connection to the appliance).
Key topics and technical requirements
- Scope and application: Requirements focus on resealing materials for threaded joints in metallic gas distribution systems inside buildings, up to 100 mbar operating pressure.
- Properties specified: The standard sets out the necessary physical and performance characteristics that sealants must demonstrate for safe and reliable resealing (e.g., compatibility with gas service, sealing performance, durability).
- Test methods: EN 13090 describes test procedures to verify that sealants meet the required properties. (The standard itself contains the specific test descriptions and acceptance criteria.)
- Material usage: Limits the standard to sealants used for metallic gas pipework threaded connections; it does not cover non-metallic pipe systems or other sealing techniques.
- Reference to EN 1775: The definition of gas pipework in buildings follows EN 1775, clarifying the installation boundary covered.
Practical applications
- Selection and qualification of sealants for maintenance or installation work on gas pipework threaded joints in residential, commercial, and light industrial buildings.
- Ensuring leak-tight restorations after joint assembly or maintenance to maintain gas safety and compliance with regulations.
- Providing objective test-based evidence for manufacturers and specifiers that a resealing product is suitable for gas service at ≤100 mbar.
Who uses EN 13090:2000
- Gas installers, plumbers and maintenance technicians specifying or applying resealing compounds.
- Sealant and chemical manufacturers developing products for gas installations.
- Test laboratories and certification bodies assessing sealant performance.
- Specifiers, safety officers and procurement teams responsible for gas installation compliance and asset maintenance.
Related standards
- EN 1775 - defines gas pipework in buildings and is referenced by EN 13090 for scope and applicability.
- Other CEN national adoptions implement EN 13090 into local standards and regulations.
Keywords: EN 13090:2000, sealants for gas pipework, resealing threaded joints, threaded joints of gas pipework, gas installation sealants, CEN, EN 1775, 100 mbar.
Frequently Asked Questions
EN 13090:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Means for resealing threaded joints of gas pipework in buildings". This standard covers: This European Standard specifies the properties and the test methods of sealants used to reseal threaded joints of metallic gas pipework in buildings operated at a maximum allowed operating pressure of 100 mbar (such sealants hereafter are referred to as "sealants"). Note Gas pipework in buildings is in accord ance with EN 1775 the pipework between the point of delivery and the inlet connection to the gas appliance.
This European Standard specifies the properties and the test methods of sealants used to reseal threaded joints of metallic gas pipework in buildings operated at a maximum allowed operating pressure of 100 mbar (such sealants hereafter are referred to as "sealants"). Note Gas pipework in buildings is in accord ance with EN 1775 the pipework between the point of delivery and the inlet connection to the gas appliance.
EN 13090:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.80 - Seals for pipe and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN 13090:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sredstva za pretesnitev navojnih spojev pri plinski napeljavi v stavbahMittel zum nachträglichen Abdichten von Gewindeverbindungen in Gas-Leitungsinstallationen in GebäudenMatériaux pour la réétanchéité des raccords filetés des tuyauteries de gaz dans les bâtimentsMeans for resealing threaded joints of gas pipework in buildings91.140.40Sistemi za osk
...
記事のタイトル：EN 13090:2000 - 建物のガスパイプのねじ結合部の再封止手段 記事の内容：この欧州規格は、建物内で最大許容動作圧力が100 mbarで動作する金属ガスパイプのねじ結合部を再封止するために使用されるシーラントの特性と試験方法を規定しています（これらのシーラントを以下「シーラント」と呼びます）。なお、建物内のガスパイプはEN 1775に基づき、供給ポイントとガス機器の入口接続部の間のパイプを指します。
기사 제목: EN 13090:2000 - 건물 내 가스 파이프의 나사 결합부를 재슬링할 수 있는 수단 기사 내용: 이 유럽 표준은 건물 내에서 최대 허용 작동 압력이 100 mbar인 금속 가스 파이프의 나사 결합부를 재슬링하기 위해 사용되는 밀폐제의 특성과 시험 방법을 규정한다. 이러한 밀폐제를 "밀폐제"라고 한다. 참고로 건물 내 가스 파이프는 EN 1775에 따라 공급 지점과 가스 가전기의 입력 연결부 사이의 파이프를 의미한다.
The article discusses the European Standard EN 13090:2000, which provides specifications and test methods for sealants used to reseal threaded joints of metallic gas pipework in buildings. These sealants are used in buildings with a maximum allowed operating pressure of 100 mbar. The standard defines the properties and testing procedures for these sealants. It also refers to EN 1775, which defines gas pipework in buildings as the pipework between the point of delivery and the inlet connection to the gas appliance.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...