EN ISO 24534-4:2010

Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010)

ISO 24534-4:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle management);
adaptation of vehicle data (e.g. for international resales);
safety-related purposes;
crime reduction;
commercial services.
It adheres to privacy and data protection regulations.
ISO 24534-4:2010 specifies the interfaces for a secure exchange of data between an ERT and an ERI reader or ERI writer in or outside the vehicle using asymmetric encryption techniques.
ISO 24534-4:2010 includes:
the application layer interface between an ERT and an onboard ERI reader or writer;
the application layer interface between the onboard ERI equipment and external ERI readers and writers;
security issues related to the communication with the ERT.

Straßenverkehrstelematik (RTTT) - Automatische Identifizierung von Fahrzeugen und Ausrüstungen - Elektronische Identifizierung für die Registrierung (ERI) - Teil 4: Sichere Anwendungsebene mittels asymmetrischer Techniken (ISO 24534-4:2010)

Identification automatique des véhicules et des équipements - Identification d'enregistrement électronique (ERI) pour les véhicules - Partie 4: Communications sûres utilisant des techniques asymétriques (ISO 24534-4:2010)

L'ISO 24534-4:2010 fournit les exigences pour une identification d'enregistrement électronique (ERI) s'appuyant sur un identifiant attribué à un véhicule (par exemple, pour la reconnaissance par les autorités nationales), adapté à l'identification électronique des véhicules locaux et étrangers par les autorités nationales; à l'identification pendant la fabrication, la maintenance et la fin de vie des véhicules (gestion du cycle de vie des véhicules); à l'adaptation des données des véhicules (par exemple, pour les reventes à l'étranger); aux besoins de la sécurité; à la réduction des délits; et aux services commerciaux.
Elle respecte les réglementations concernant le respect de la vie privée et la protection des données.
Elle spécifie les interfaces pour un échange sécurisé de données entre un ERT et un lecteur ERI ou un scripteur ERI à l'intérieur ou à l'extérieur du véhicule à l'aide de techniques de chiffrement asymétriques.
Elle comprend l'interface de la couche application entre un ERT et un lecteur ou un scripteur ERI embarqué; l'interface de la couche application entre un équipement ERI embarqué et des lecteurs et des scripteurs ERI extérieurs; et les problèmes de sécurité relatifs à la communication avec l'ERT.

Avtomatična identifikacija vozil in opreme - Elektronska identifikacija registracije (ERI) za vozila - 4. del: Varne komunikacije, pri katerih se uporabljajo asimetrične tehnike (ISO 24534-4:2010)

Ta del ISO 24534 zagotavlja zahteve za elektronsko identifikacijo registracije (ERI), ki so osnovane na označbi, določeni za vozilo (npr. za prepoznavo s strani državnih organov), ki je primerna za uporabo pri: - elektronski identifikaciji lokalnih in tujih vozil z strani državnih organov; - proizvodnji vozil, vzdrževanju med delovanjem in identifikacijo ob koncu (upravljanju življenjskega cikla vozila); - prilagoditvi podatkov o vozilu (npr. za mednarodne izdaje); - namenih, povezanih z varnostjo; - zmanjševanju kriminala; - gospodarskih storitvah. Drži se predpisov o zasebnosti in zaščiti podatkov. Ta del ISO 24534 določa vmesnike za varno izmenjavo podatkov med ERT in ERI čitalnikom ali ERI pisalnikom, znotraj ali zunaj vozila, z uporabo asimetričnih šifrirnih tehnik. – upravljanje; - prilagoditev podatkov vozila (npr. za mednarodne izdaje); - nameni, povezani z varnostjo; - zmanjševanje kriminala; - gospodarske storitve.  Ta del ISO 24534 vključuje: - povezavo za namensko raven med ERT in ERI čitalnikom ali pisalnikom v vozilu; -  povezava za namensko raven med ERI opremo v vozilu in zunanjimi ERI čitalniki in pisalniki; - vprašanja zaščite, povezana s komunikacijo z ERT.

General Information

• Status: Published
• Publication Date: 14-Jul-2010
• Withdrawal Date: 30-Jan-2011
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• ICS: 43.020 - Road vehicles in general
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 12 - Automatic Vehicle Identification and Automatic Equipment Identification (AVI/AEI)
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jul-2010
• Due Date: 09-Apr-2011
• Completion Date: 15-Jul-2010
• Mandate: M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
• Ref Project: SIST EN ISO 24534-4:2010 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010)

Relations

• Replaces: CEN ISO/TS 24534-4:2008 - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO/TS 24534-4:2008)
• Effective Date: 22-Dec-2008
• Amended By: EN ISO 24534-4:2010/A1:2019 - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques - Amendment 1 (ISO 24534-4:2010/Amd 1:2019)
• Effective Date: 11-May-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST-TS CEN ISO/TS 24534-4:2008
$YWRPDWLþQDLGHQWLILNDFLMDYR]LOLQRSUHPH(OHNWURQVNDLGHQWLILNDFLMDUHJLVWUDFLMH
(5,]DYR]LODGHO9DUQHNRPXQLNDFLMHSULNDWHULKVHXSRUDEOMDMRDVLPHWULþQH
WHKQLNH,62
Automatic vehicle and equipment identification - Electronic Registration Identification
(ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO
24534-4:2010)
Identification automatique des véhicules et des équipements - Identification
d'enregistrement électronique (ERI) pour les véhicules - Partie 4: Communications sûres
utilisant des techniques asymétriques (ISO 24534-4:2010)
Ta slovenski standard je istoveten z: EN ISO 24534-4:2010
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 24534-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 35.240.60; 03.220.20 Supersedes CEN ISO/TS 24534-4:2008
English Version
Automatic vehicle and equipment identification - Electronic
Registration Identification (ERI) for vehicles - Part 4: Secure
communications using asymmetrical techniques (ISO 24534-
4:2010)
Identification automatique des véhicules et des
équipements - Identification d'enregistrement électronique
(ERI) pour les véhicules - Partie 4: Communications sûres
utilisant des techniques asymétriques (ISO 24534-4:2010)
This European Standard was approved by CEN on 16 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24534-4:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 24534-4:2010) has been prepared by Technical Committee CEN/TC 278 “Road
transport and traffic telematics”, the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 "Intelligent transport systems".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 24534-4:2008.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24534-4:2010 has been approved by CEN as a EN ISO 24534-4:2010 without any
modification.

INTERNATIONAL ISO
STANDARD 24534-4
First edition
2010-07-15
Automatic vehicle and equipment
identification — Electronic registration
identification (ERI) for vehicles —
Part 4:
Secure communications using
asymmetrical techniques
Identification automatique des véhicules et des équipements —
Identification d'enregistrement électronique (ERI) pour les véhicules —
Partie 4: Communications sûres utilisant des techniques asymétriques

Reference number
ISO 24534-4:2010(E)
©
ISO 2010
ISO 24534-4:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 24534-4:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.2
3 Terms and definitions .2
4 Abbreviations.10
5 System communications concept .11
5.1 Introduction.11
5.2 Overview.11
5.3 Security services .18
5.4 Communication architecture description .23
5.5 Interfaces.25
6 Interface requirements.26
6.1 Overview.26
6.2 Abstract transaction definitions .27
6.3 The ERT interfaces .63
Annex A (normative) ASN.1 modules .66
Annex B (normative) PICS pro forma .77
Annex C (informative) Operational scenarios.81
Bibliography.93

ISO 24534-4:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 24534-4 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 278, Road transport and traffic telematics, in collaboration with Technical Committee ISO/TC 204,
Intelligent transport systems, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This first edition of ISO 24534-4 cancels and replaces ISO/TS 24534-4:2008, which has been technically
revised.
ISO 24534 consists of the following parts, under the general title Automatic vehicle and equipment
identification — Electronic registration identification (ERI) for vehicles:
⎯ Part 1: Architecture
⎯ Part 2: Operational requirements
⎯ Part 3: Vehicle data
⎯ Part 4: Secure communications using asymmetrical techniques
⎯ Part 5: Secure communications using symmetrical techniques
iv © ISO 2010 – All rights reserved

ISO 24534-4:2010(E)
Introduction
A quickly emerging need has been identified with administrations to improve the unique identification of
vehicles for a variety of services. Situations are already occurring where manufacturers intend to fit lifetime
tags to vehicles. Various governments are considering the needs and benefits of electronic registration
identification (ERI) as a legal proof of vehicle identity with potential mandatory uses. There is commercial and
economic justification in respect of both tags and infrastructure that a standard enables an interoperable
solution.
ERI is a means of uniquely identifying road vehicles. The application of ERI will offer significant benefits over
existing techniques for vehicle identification. It will be a suitable tool for the future management and
administration of traffic and transport, including applications in free-flow, multi-lane traffic conditions with the
capability to support mobile transactions. ERI addresses the need of authorities and other road users for a
trusted electronic identification, including roaming vehicles.
This part of ISO 24534 specifies the application layer interfaces for the exchange of data between an onboard
component containing the ERI data and a reader or writer inside or outside the vehicle.
The exchanged identification data consists of a unique vehicle identifier and may also include data typically
found in the vehicle's registration certificate. The authenticity of the exchanged vehicle data can be further
enhanced by ensuring data has been obtained by request from a commissioned device, with the data
electronically signed by the registration authority.
In order to facilitate (international) resales of vehicles, the ERI interface includes provisions for another
accredited registration authority to take over the registration of a vehicle.
The ERI interface supports confidentiality measures to adhere to (inter)national privacy regulation and to
prevent other misuse of electronic identification of vehicles. A registration authority may authorize other
authorities to access the vehicle's data. A holder of a registration
...