Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel

This European Standard specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture.

Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Treibstoffbeständigkeit von Asphaltmischgütern oder Fahrbahnbefestigungen aus Asphalt fest. Dieses Verfahren besteht darin, einen im Labor hergestellten oder durch Kernbohren aus einer Fahrbahnbefestigung entnommenen Probekörper zunächst in Treibstoff zu lagern und ihn dann in einem Bürstenprüfgerät zu bürsten. Der Materialverlust des Probekörpers ist ein Maß für die Beständigkeit des betreffenden Asphalts gegenüber dem betreffenden Treibstoff.

Mélanges bitumineux - Méthodes d' essais pour mélange hydrocarboné à chaud - Partie 43: Résistance aux carburants

La présente Norme européenne spécifie une méthode d’essai destinée à déterminer la résistance aux carburants d’un mélange bitumineux ou d’une chaussée bitumineuse. Le mode opératoire implique tout d’abord l’immersion dans un carburant d’une éprouvette préparée en laboratoire ou extraite de la chaussée, suivie d’une phase d’abrasion au moyen d’un dispositif d'essai de brossage. La perte de matériau de l’éprouvette permet de mesurer la résistance du mélange bitumineux à ce carburant.

Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 43. del: Odpornost proti gorivu

Standard EN 12697-43 določa preskusno metodo za ugotavljanje odpornosti bitumenske zmesi ali voziščne konstrukcije proti gorivom. Postopek vključuje začetno namakanje preskušanca v gorivu, pri čemer je preskušanec izdelan v laboratoriju ali izvrtan iz voziščne konstrukcije, čemur sledi obdobje premazovanja s preskusno napravo za premazovanje. Izguba materiala preskušanca je merilo odpornosti proti posameznemu gorivu za določeno bitumensko zmes.

General Information

Status
Withdrawn
Publication Date
24-Jun-2014
Withdrawal Date
11-Apr-2023
Current Stage

Relations

Buy Standard

Standard
EN 12697-43:2014 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12697-43:2012
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 43: TreibstoffbeständigkeitMélanges bitumineux - Essais pour enrobés à chaud - Partie 43: Résistance aux carburantsBituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-43:2014SIST EN 12697-43:2014en01-oktober-2014SIST EN 12697-43:2014SLOVENSKI
STANDARDSIST EN 12697-43:20051DGRPHãþD



SIST EN 12697-43:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-43
June 2014 ICS 93.080.20 Supersedes EN 12697-43:2005English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Mélanges bitumineux - Méthodes d' essais pour mélange hydrocarboné à chaud - Partie 43: Résistance aux carburants
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit This European Standard was approved by CEN on 14 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-43:2014 ESIST EN 12697-43:2014



EN 12697-43:2014 (E) 2 Contents
Page Foreword .3 1 Scope .7 2 Normative references .7 3 Terms and definitions .7 4 Principle .7 5 Apparatus .8 6 Fuels . 11 7 Preparation of test specimens . 11 8 Procedure . 12 8.1 Soaking in fuel and removing the fuel . 12 8.1.1 Preparation for testing and immersion . 12 8.1.2 Cleaning the specimen . 12 8.1.3 Loss of mass due to immersion . 12 8.2 The brush test . 13 8.2.1 General . 13 8.2.2 Brush test for a porous asphalt specimen using a laboratory mixer . 13 8.2.3 Brush test for a non-porous asphalt specimen using a laboratory mixer .
...

SLOVENSKI STANDARD
oSIST prEN 12697-43:2012
01-december-2012
%LWXPHQVNH]PHVL3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVLGHO
2GSRUQRVWSURWLJRULYX
Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
Asphalt - Prüfverfahren für Heißasphalt - Teil 43: Treibstoffbeständigkeit
Mélanges bitumineux - Essais pour enrobés à chaud - Partie 43: Résistance aux
carburants
Ta slovenski standard je istoveten z: prEN 12697-43
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-43:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12697-43:2012

---------------------- Page: 2 ----------------------
oSIST prEN 12697-43:2012


EUROPEAN STANDARD
DRAFT
prEN 12697-43
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2012
ICS 93.080.20 Will supersede EN 12697-43:2005
English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part
43: Resistance to fuel
Mélanges bitumineux - Essais pour enrobés à chaud - Asphalt - Prüfverfahren für Heißasphalt - Teil 43:
Partie 43: Résistance aux carburants Treibstoffbeständigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-43:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12697-43:2012
prEN 12697-43:2012 (E)
Contents Page
Foreword .3
1 Scope .7
2 Normative references .7
3 Terms and definitions .7
4 Principle .7
5 Equipment .8
5.1 Beaker with glass rod .8
5.2 Glass funnel .8
5.3 Balance .8
5.4 Conditioning chamber .8
5.5 Impact hammer, gyrator or roller compactor .8
5.6 Brush test devices .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.