iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13920-13:2003

(Main)

Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys

Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys

This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap in the form of turnings consisting of two or more alloys. EXAMPLE Scalpings, millings, borings from plates, extruded profiles, castings etc..

Aluminium und Aluminiumlegierungen - Schrott - Teil 13: Gemischte Späne aus zwei oder mehr Legierungen

Diese Europäische Norm legt die Anforderungen an die Eigenschaften, die chemische Zusammensetzung und die Metallausbeute von Aluminiumschrott aus gemischten Spänen fest, der aus zwei oder mehr Legierungen besteht.
BEISPIEL   Frässpäne, Drehspäne, Bohrspäne von Platten, Strangpressprofilen, Gussstücken.

Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 13: Tournures mélangées composées de deux ou plusieurs alliages

Cette Norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal du scrap constitué de tournures mélangées composées de deux ou plusieurs alliages.
EXEMPLE   Copeaux de fraisage, tournures, copeaux d'alésage, provenant de tôles, profilés filés, moulages etc..

Aluminij in aluminijeve zlitine – Odpadni aluminij – 13. del: Mešani ostružki iz ene ali več zlitin

General Information

Status
Published
Publication Date
22-Apr-2003
ICS
13.030.50 - Recycling
77.120.10 - Aluminium and aluminium alloys
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 20 - Scrap
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024
Ref Project
SIST EN 13920-13:2004 - Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys

Buy Standard

EN 13920-13:2004EN 13920-13:2004
PreviousNext
Standard
EN 13920-13:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Schrott - Teil 13: Gemischte Späne aus zwei oder mehr LegierungenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 13: Tournures mélangées composées de deux ou plusieurs alliagesAluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-13:2003SIST EN 13920-13:2004en01-januar-2004SIST EN 13920-13:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-13April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 13: Mixedturnings consisting of two or more alloysAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 13: Tournuresmélangées composées de deux ou plusieurs alliagesAluminium und Aluminiumlegierungen - Schrott - Teil 13:Gemischte Späne aus zwei oder mehr LegierungenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-13:2003 ESIST EN 13920-13:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12258-3:2003(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
SIST EN 12258-3:2004

This part of EN 302 specifies a method for determining the resistance to delamination of bonded joints.
It is suitable for the following applications:
a) for assessing the compliance of adhesives with prEN 301;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for comparing the effects on the bond strength resulting from the choice of bonding conditions, from different climatic conditioning and from the treatment of the test pieces before and after bonding.
This test is intended primarily to obtain performance data for the classification of adhesives for load-bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended for use to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not intended to be used to assess the suitability of adhesives for the manufacture of wood-based panels.

  • Standard
    26 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-6:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys
SIST EN 13920-6:2004

This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap (predominantly old scrap) consisting of two or more wrought aluminium alloys. EXAMPLES - Mix of used pots and pans, TV antennas, road signals, car-plates, window frames and other end-of-life aluminium objects ; - scrap from demolition of buildings.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-15:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
SIST EN 13920-15:2004

This European Standard specifies characteristics, chemical composition and metal yield of decoated aluminium scrap obtained by decoating mixed used aluminium packagings through various processes, e.g. pyrolysis, mechanical delamination, chemical delamination or a combination of these. It also applies to aluminium scrap separated from the bottom ashes of incinerators.
EXAMPLE   A mix of used aluminium packaging scrap of different alloys which were decoated to be used for melting or other forms of metal recycling.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-10:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans
SIST EN 13920-10:2004

This part of this European Standard specifies characteristics, form, chemical composition and metal yield of scrap consisting of used aluminium beverage cans. NOTE 1 This scrap is commercially known as UBC (Used Beverage Cans) NOTE 2 Complete cans, after removal of the liquid content, even if not obtained from post-consumer collection schemes, are within the scope of this standard and are also regarded as UBC.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-5:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series
SIST EN 13920-5:2004

This part of this European Standard specifies, characteristics, chemical composition and metal yield of new aluminium scrap consisting of a mix of pieces obtained from two or more wrought aluminium alloys of the same series.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-9:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials
SIST EN 13920-9:2004

This part of this European Standard specifies the characteristics, chemical composition and metal yield of the aluminium scrap fraction obtained by flotation or other separation processes of non ferrous shredded materials. It applies to scrap consisting mainly of aluminium castings, but also containing aluminium scrap from wrought products. EXAMPLE The aluminium fraction as obtained by flotation of the material described in prEN 132/200-8.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-1:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests
SIST EN 13920-1:2004

This European Standard specifies general requirements and guidelines for the delivery and classification of the different categories of aluminium scrap, including quality requirements, sampling and tests.
NOTE   Special requirements and guidelines for each of the scrap categories are specified in prEN 13920 2 to prEN 13920 16.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-14:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings
SIST EN 13920-14:2004

This part of this European Standard specifies characteristics, form, chemical composition and metal yield of scrap consisting of a mixture of used aluminium packagings. This mixture includes aluminium foil laminated with paper or plastics having a metal yield less than 28%.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-4:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy
SIST EN 13920-4:2004

This part of this European Standard specifies, characteristics, chemical composition and metal yield of scrap consisting of one single wrought aluminium alloy. It does not apply to turnings which are covered by part 12 of this Standard. EXAMPLE Production scraps of sheet, strip, tubes, extruded or drawn profiles, ends of extrusion ingots etc..

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13920-11:2003(Main)
Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators
SIST EN 13920-11:2004

This part of this European Standard specifies characteristics and chemical composition of scrap from aluminium/copper radiators with a copper content sufficiently high to allow its use as alloying material in the production of aluminium alloys. EXAMPLE Prepared radiators from vehicles, refrigerators or from industrial equipment.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day