EN 13920-5:2003

Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series

This part of this European Standard specifies, characteristics, chemical composition and metal yield of new aluminium scrap consisting of a mix of pieces obtained from two or more wrought aluminium alloys of the same series.

Aluminium und Aluminiumlegierungen - Schrott - Teil 5: Schrott aus zwei oder mehr Knetlegierungen der gleichen Legierungsserie

Diese Europäische Norm legt die Anforderungen an die Eigenschaften, chemische Zusammensetzung und Metallausbeute von Schrott aus Aluminium fest, der aus gemischten Stücken von zwei oder mehr Aluminium Knetlegierungen aus der gleichen Serie besteht.
BEISPIELE   
   Abschnitte von Blechen, Bändern, Rohren, stranggepressten Profilen und fehlerhaften Aluminiumerzeugnissen;
   alter sortierter Schrott.

Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 5: Scrap composé de deux ou plusieurs alliages de corroyage de la même série

Cette partie de la présente norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal des produits de recyclage d'aluminium constitués d'un mélange de morceaux provenant de deux ou plusieurs alliages d'aluminium corroyé de la même série.

Aluminij in aluminijeve zlitine – Odpadni aluminij – 5. del: Odpadni aluminij iz dveh ali več gnetnih zlitin iste vrste

General Information

• Status: Published
• Publication Date: 22-Apr-2003
• ICS: 13.030.50 - Recycling
• ICS: 77.120.10 - Aluminium and aluminium alloys
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 20 - Scrap
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jul-2024
• Completion Date: 15-Jul-2024
• Ref Project: SIST EN 13920-5:2004 - Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Schrott - Teil 5: Schrott aus zwei oder mehr Knetlegierungen der gleichen LegierungsserieAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 5: Scrap composé de deux ou plusieurs alliages de corroyage de la meme sérieAluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-5:2003SIST EN 13920-5:2004en01-januar-2004SIST EN 13920-5:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-5April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 5: Scrapconsisting of two or more wrought alloys of the same seriesAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 5: Scrap composé dedeux ou plusieurs alliages de corroyage de la même sérieAluminium und Aluminiumlegierungen - Schrott - Teil 5:Schrott aus zwei oder mehr Knetlegierungen der gleichenLegierungsserieThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-5:2003 ESIST EN 13920-5:2004
...