EN 13920-7:2003

Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings

This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of aluminium castings in entire or fragmented pieces. EXAMPLES - Production scrap from foundries, e. g. rejected pieces and risings ;
- collected castings of various alloys e.g. from maintenance or dismantling of vehicles, household appliances, industrial machinery etc. ;
- selected whole castings, e. g. pistons, wheels.

Aluminium und Aluminiumlegierungen - Schrott - Teil 7: Schrott aus Gussstücken

Diese Europäische Norm legt die Anforderungen an die Eigenschaften, chemische Zusammensetzung und Metallausbeute von Aluminiumschrott aus ganzen oder gebrochenen Gussstücken fest.
BEISPIELE   
   Produktionsschrott aus Gießereien, z. B. Ausschussteile und Steiger;
   gesammelte Gussstücke aus verschiedenen Legierungen, die bei der Reparatur oder Demontage von Fahrzeugen, Haushaltsgeräten, Industriemaschinen usw. anfallen;
   ausgewählte ganze Gussstücke, z. B. Kolben, Räder.

Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 7: Scrap composé de pièces moulées

Cette partie de la présente norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal du scrap d'aluminium constitué de pièces moulées en aluminium entières ou en morceaux. EXEMPLES - Scrap de production provenant de fonderies, tels que rebuts et canaux de coulée ; - pièces moulées de divers alliages, récupérées lors de l'entretien ou du démontage de véhicules, appareils domestiques, machines industrielles, etc. ; - pièces moulées entières sélectionnées, telles que pistons, roues, etc..

Aluminij in aluminijeve zlitine – Odpadni aluminij – 7. del: Odpadki ulitkov

General Information

• Status: Published
• Publication Date: 22-Apr-2003
• ICS: 13.030.50 - Recycling
• ICS: 77.120.10 - Aluminium and aluminium alloys
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 20 - Scrap
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Jun-2019
• Ref Project: SIST EN 13920-7:2004 - Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 7. del: Odpadki ulitkovAluminium und Aluminiumlegierungen - Schrott - Teil 7: Schrott aus GussstückenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 7: Scrap composé de pieces mouléesAluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-7:2003SIST EN 13920-7:2004en01-januar-2004SIST EN 13920-7:2004SLOVENSKI
STANDARD



SIST EN 13920-7:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-7April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 7: Scrapconsisting of castingsAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 7: Scrap composé depièces mouléesAluminium und Aluminiumlegierungen - Schrott - Teil 7:Schrott aus GussstückenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-7:2003 ESIST EN 13920-7:2004



EN 13920-7:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Ordering information.45Requirements.55.1General.55.2Characteristics.55.3Chemical composition.55.4Metal yield.56Classification procedure, treatment of non-conformities and arbitration.5SIST EN 13920-7:2004



EN 13920-7:2003 (E)3ForewordThis document (EN 13920-7:2003) has been prepared by Technical Committee CEN /TC 132 "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Within its programme of work, Technical Committee CEN/TC 132 has entrusted CEN/TC132/WG 20 "Scrap" toprepare the following standard.EN 13920 comprises the following parts under the general title "Aluminium and aluminium alloys — Scrap":¾ Part 1: General requirements, sampling and tests¾ Part 2: Unalloyed aluminium scrap¾ Part 3: Wire and cable scrap¾ Part 4: Scrap consisting of one single wrought a
...