FprEN 16207

Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock

This document specifies the functionality, position, constraints and control of a magnetic track brake system (MTB system) installed in bogies for use in emergency braking and in low adhesion conditions on Mainline Trains with speeds up to 280 km/h. It covers high suspension types of MTB only and not high/low and low suspension type of MTB.
This document also contains test methods and acceptance criteria for an MTB system. It identifies interfaces with electrical equipment, bogie, track and other brake systems.
On the basis of the existing international and national standards, additional requirements are defined for:
-   conditions of application for the MTB system;
-   retardation and brake forces;
-   functional and design features;
-   strength requirements;
-   type, series and vehicle implementation tests.
For design and calculation a "reference surface" is established.

Bahnanwendungen - Bremse - Anforderungen an die Funktion und Leistungsfähigkeit von Magnetschienenbremssystemen für Schienenfahrzeuge

Dieses Dokument legt die Funktionsweise, Position, Einschränkungen und Steuerung für Magnetschienenbremssysteme (Mg Bremssysteme) fest, die in Drehgestelle von Vollbahnzügen eingebaut sind und bei Geschwindigkeiten bis zu 280 km/h für Schnellbremsungen sowie unter Bedingungen mit niedrigem Kraftschluss genutzt werden. Dieses Dokument beschäftigt sich daher nur mit Mg Bremsen in Hochaufhängung und nicht mit hoch/tief bzw. tief aufgehängten Mg Bremsen.
Dieses Dokument beinhaltet auch Prüfverfahren und Zulassungsbedingungen für Mg Bremssysteme. Außerdem werden die Schnittstellen zur elektrischen Ausrüstung, zum Drehgestell, zum Oberbau und zu anderen Bremssystemen festgelegt.
Auf der Basis bestehender Internationaler und nationaler Normen werden zusätzliche Anforderungen festgelegt an:
-   Einsatzbedingungen der Mg Bremse;
-   Verzögerungs  und Bremskräfte;
-   Funktions- und Konstruktionsmerkmale;
-   Festigkeitsanforderungen;
-   Typ-, Serien- und Fahrzeugintegrationsprüfungen.
Zur Konstruktion und Berechnung wird eine "Referenzfläche" (das Normalquadrat) eingeführt.

Applications ferroviaires - Freinage - Critères pour la fonction et la performance des systèmes de freinage magnétiques pour véhicules ferroviaires

Le présent document spécifie la fonctionnalité, la position, les contraintes et la commande d'un système de frein électromagnétique (système FEM) installé sur des bogies et utilisé en cas de freinage d'urgence et dans des conditions de faible adhérence sur des trains de grandes lignes à des vitesses inférieures ou égales à 280 km/h. Elle couvre uniquement les types de FEM à suspension haute ; cela exclut donc les types de FEM à suspensions haute/basse et à suspensions basses.
Le présent document contient également des méthodes d'essais et des critères d'acceptation pour un système FEM. Il identifie les interfaces entre l'équipement électrique, le bogie, la voie et d'autres systèmes de freinage.
Sur la base des Normes nationales et internationales existantes, des exigences supplémentaires sont définies pour les :
-   conditions d'application du système FEM ;
-   efforts de décélération et de freinage ;
-   caractéristiques fonctionnelles et de conception ;
-   exigences de résistance ;
-   essais de type, de série et de mise en oeuvre sur véhicules.
Pour la conception et les calculs, une « surface de référence » est établie.

Železniške naprave - Zavore - Funkcionalna merila in merila za zmogljivost elektromagnetnih zavornih sistemov za železniška vozila

General Information

• Status: Not Published
• Publication Date: 08-Nov-2023
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 3/WG 47 - Braking
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 15-Oct-2023
• Due Date: 10-Feb-2023
• Completion Date: 15-Oct-2023
• Directive: 2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Mandate: M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
• Ref Project: kSIST FprEN 16207:2023 - Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock

Relations

• Revises: EN 16207:2014+A1:2019 - Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16207:2021
01-december-2021
Železniške naprave - Zavore - Funkcionalna merila in merila za zmogljivost
elektromagnetnih zavornih sistemov za železniška vozila
Railway applications - Braking - Functional and performance criteria of Magnetic Track
Brake systems for use in railway rolling stock
Bahnanwendungen - Bremse - Anforderungen an Funktion und Leistungsfähigkeit von
Magnetschienenbremssystemen für Schienenfahrzeuge
Applications ferroviaires - Freinage - Critères pour la fonction et la performance des
systèmes de freinage magnétiques pour véhicules ferroviaires
Ta slovenski standard je istoveten z: prEN 16207
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 16207:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16207:2021

---------------------- Page: 2 ----------------------
oSIST prEN 16207:2021


DRAFT
EUROPEAN STANDARD
prEN 16207
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2021
ICS 45.040 Will supersede EN 16207:2014+A1:2019
English Version

Railway applications - Braking - Functional and
performance criteria of Magnetic Track Brake systems for
use in railway rolling stock
Applications ferroviaires - Freinage - Critères pour la Bahnanwendungen - Bremse - Anforderungen an
fonction et la performance des systèmes de freinage Funktion und Leistungsfähigkeit von
magnétiques pour véhicules ferroviaires Magnetschienenbremssystemen für Schienenfahrzeuge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16207:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16207:2021
prEN 16207:2021 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 Task and purpose of the MTB . 9
5 Design requirements . 10
5.1 Space envelope to be observed by the MTB . 10
5.2 Retardation force .
...