EN ISP 11190:1996
(Main)Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory (ISO/IEC ISP 11190:1995)
Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory (ISO/IEC ISP 11190:1995)
Informationstechnik - Internationale Profilnorm FDI3 - Datendefinitionen für den Verzeichnisdienst - Nutzung des Verzeichnisdienstes durch FTAM (ISO/IEC ISP 11190/1995)
Technologies de l'information - Profil normalisé international FDI3 - Définitions de données du répertoire - Emploi FTAM du répertoire (ISO/IEC ISP 11190:1995)
Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory (ISO/IEC ISP 11190:1995)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory (ISO/IEC ISP 11190:1995)Informationstechnik - Internationale Profilnorm FDI3 - Datendefinitionen für den Verzeichnisdienst - Nutzung des Verzeichnisdienstes durch FTAM (ISO/IEC ISP 11190/1995)Technologies de l'information - Profil normalisé international FDI3 - Définitions de données du répertoire - Emploi FTAM du répertoire (ISO/IEC ISP 11190:1995)Information technology - International Standardized Profile FDI3 - Directory data definitions - FTAM Use of the Directory (ISO/IEC ISP 11190:1995)35.100.05UHãLWYHMultilayer applicationsICS:Ta slovenski standard je istoveten z:EN ISP 11190:1996SIST EN ISP 11190:1997en01-december-1997SIST EN ISP 11190:1997SLOVENSKI
STANDARD
SIST EN ISP 11190:1997
SIST EN ISP 11190:1997
SIST EN ISP 11190:1997
INTERNATIONAL STANDARDIZED PROFILE ISO/IEC ISP 11190 First edition 1995-04-01 Information technology - International Standardized Profile FD13 - Directory data definitions - FTAM Use of the Directory Technologies de I’information - Profil normalise international FD13 - DGfinitions de donnees du repertoire - Emploi FTAM du rbpertoire Reference number ISO/IEC ISP 11190:1995(E) SIST EN ISP 11190:1997
ISOAEC ISP 11190 : 1995 (E) Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ill Introduction . . . . . . . . .*.*. iv Scope . 1 1.1 General . 1 1.2 Position within the taxonomy . 1 1.3 Scenario . 1 Normative references . 1 Definitions . 2 3.1 General . 2 3.2 Support level . 2 Abbreviations . 2 Conformance . 2 5.1 DSA conformance . 2 5.2 DUA conformance . 2 DIT structure . 3 Object classes . 3 7.1 FTAM capability . 3 7.2 Use of the FTAM Capability Object class . 3 Attribute types . 3 8.1 FTAM roles . 3 8.2 FTAM Service classes and functional units . 4 8.3 FTAM attribute groups . 4 8.4 FTAM document types . 4 8.5 FTAM file model . 5 8.6 FTAM quality of Service . 5 Attribute syntaxes . 5 Annexes A Profile Requirements List for FD13 FTAM Use of the Directory . . . . . . . . . . . . . . . . . .6 B C FD13 Directory Definitions in ASN.l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Profile Object Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 0 ISO/IEC 1995 All rights reserved. Unless otherwise specified, no patt of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. lSO/IEC Copyright Office l Case postale 56 l CH-121 1 Geneve 20 l Swikerland Printed in Swikerland ii SIST EN ISP 11190:1997
0 ISO/IEC ISO/IEC ISP 11190 : 1995 (E) Foreword ISO (the International Organization for Standardization) and IEC (the International Eiectrotechnical Commission) form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental or non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTCI. In addition to developing International Standards, ISO/IEC JTCI has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a Standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least 75 % of the national bodies casting a vote. This International Standardized Profile was prepared with the collaboration of - Asia-Oceania Workshop (AOW); - European Workshop for Open Systems (EWOS); - OSE Implementors’ Workshop (OIW). Annexes A , B and C form an integral patt of this International Standardized Profile. SIST EN ISP 11190:1997
ISOAEC ISP 11190 : 1995 (E) Introduction 0 ISO/IEC The concept and structure of International Standardized Profiles for Information Systems are laid down in the Technical Report ISO/IEC TR 10000. The purpose of an International Standardized Profile is to recommend when and how certain information technology Standards shall be used. This International Standardized Profile specifies application Profile FD13 as defined in the Technical Report ISO/IEC TR 10000-2. This International Standardized Profile is one of a set of International Standardized Profiles relating to the Directory (see TR 10000-2). lt specifies the Schema of information for the FTAM application capability to be stored in the Directory according to ISO/IEC 9594. ISO/IEC ISP 10616 profiles information to be stored within the Directory which is common to a variety of applications. This International Standardized Profile augments that information with FTAM specific information. Statements and conformance requirements stated in ISO/IEC ISP 10616 for the information profiled by ISO/IEC ISP 10616 are also valid for the FTAM specific information profiled by this International Standardized Profile. This International Standardized Profile specifies the use of the Directory by FTAM, using existing Object class and attribute type definitions from the Directory specifications themselves, and additional definitions. These existing and additional definitions are also intended to support the use of the Directory by users of FTAM applications. Examples of FTAM specific attributes to stored in the Directory are FTAM profiles and roles which an implementation tan support, combinations of Service classes and functional units, attribute groups, document types and quality of Service characteristics. iv SIST EN ISP 11190:1997
INTERNATIONAL STANDARDIZED PROFILE 0 ‘SO”EC ISO/IEC ISP 11190 : 1995 (E) Information technology - International Standardized Profile FD13 - Directory data definitions - FTAM Use of the Directory 1 Scope 1 .l General ISO/IEC ISP 10616 profiles information to be stored within the Directory which is common to a variety of applications. This International Standardized Profile augments this information with FTAM specific information. Statements and conformance requirements stated in ISO/IEC ISP 10616 for the information profiled by ISO/IEC ISP 10616 are also valid for the FTAM specific information profiled by this International Standardized Profile. This International Standardized Profile specifies the use of the Directory, by FTAM, using existing Object class and attribute type definitions from the Directory specifications themselves, and additional definitions. These existing and additional definitions are also intended to support the use of the Directory by users of FTAM applications. 1 .2 Position within the taxonomy This International Standardized Profile is identified in ISO/IEC TR 10000-2 as “Information technology - International Standardized Profile FDI 3 - Directory data definitions - KAM Use of the Directory”. 1.3 Scenario An FTAM application, by means of its associated Directory User Agent (DUA), obtains Directory information by accessing directly or indirectly one or more Directory System Agents (DSAs) of the Directory (see figure 1). Figure 1 - Access of an FTAM application to the Directory 2 Normative references The following ITU-T Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this International Standardized Profile. At the time of publication the editions indicated were valid. All Recommendations and International Standards are subject to revision, and Parties to agreements based on this International Standardized Profile are encouraged to investigate the possibility of applying the most recent edition of the Recommendations and International Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs. The ITU- T Secretariat maintains a list of currently valid Recommendations. - ISO 8571-1: 1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1 : Introduction. - ISO 8571-1 :1988/Amd.l:1992, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1 : Introduction - Amendment 1 : Filestore Management. - ISO 8571-1 :1988/Amd.2:1993, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1 : Introduction - Amendment 2 : Overlapped access. - ISO 8571-2: 1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 2 : Virtual Filestore Definition. - ISO 8571=2:1988/Amd. 1 :1992, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 2 : Virtual Filestore Definition - Amendment 1 : Filestore . Management. - ISO 8571-2: 1988lAmd.2: 1993, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Pst? 2 : Vitfual Filestore Definition - Amendment 2 : Overlapped access. - ISO 8571-3: 1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 3 : File Service Definition. - ISO 8571-3: 1988lAmd. 1: 1992, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Pafl 3 : File Service Definition - Amendment 1 : Filestore Management. - ISO 8571-3:1988/Amd.2:1993, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 3 : File Service Definition - Amendment 2 : Overlapped access. - ISO 8571-4: 1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Parf 4 : File Protocol Specification. 1 SIST EN ISP 11190:1997
ISO/IEC ISP 11190 : 1995 (E) 0 ISOAEC - ISO 8571-4: 1988lAmd. 1: 1992, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 4 : File Protocol Specification - Amendment 1 : Filestore Management. - ISO 8571-4: 1988/Amd.2: 1993, Information processing sys tems - Open Systems Interconnection - File Transfer, Access and Management - Part 4 : File Protocol Specification - Amendment 2 : Overlapped access. - ISO/IEC TR 10000-1 :1992, Information techno/ogy - Framework and Taxonomy of International Standardized Profiles - Part 1: Framework. - ISO/IEC TR I OOOO-2:1994, Information technology - Framework and Taxonomy of International Standardized Profiles - Part 2 : Principles and Taxonomy for OS/ Profiles. - ISO/IEC ISP 10616:1995, Information techno/ogy - InternationaI Standardized Profile FD/1 1 - Directory data definitions - Common Directory Use (Normal). - CCITT Recommendation X.581 :1992, Directory Access Protocol - Protocol Implementation Conformance Statement (PICS) Proforma. 3 Definitions ’ For the purposes of this International Standardized Profile, definitions apply as defined in the referenced Standards. In addition, the following terms are defined. 3.1 General This International Standardized Profile makes use of the following terms defined in ISO/IEC ISP 10616 : a) W Cl auxiliary Object class structural Object class structure element 3.2 Support level To specify the support level of protocol features for this International Standardized Profile, the following terminology is defined. 3.2.1 mandatory; m : Mandatory requirement for support. A feature (Object class, attribute type, attribute Syntax) is supported by a DSA implementation if the DSA is able to process the feature in accordance with the base Standard or as specified this International Standardized Profile (see also clauses 7, 8 and 9). 3.2.2 optionally supported; o : The support of the feature (Object class, attribute type, attribute Syntax) is left to the implementor of the DSA. 4 Abbreviations DIT Directory Information Tree DSA Directory System Agent DUA Directory User Agent FrAM File Transfer, Access and Management ISP International Standardized Profile OID Object Identifier PRL Profile Requirements List 5 Conformance 5.1 DSA conformance Conformance to this International Standardized Profile implies conformance to ISO/IEC ISP 10616, i.e., as a precondition to conform to this International Standardized Profile, a DSA shall fulfill the conformance requirements as stated in ISO/IEC ISP 10616. In addition, a DSA shall after suitable set up be capable of storing modifying and retrieving entries which fulfill all of the following conditions: - The entry lies within the scope of the minimum set of structure and naming elements sP ecified in clause 6; - The entry’s Object classes are patt of the set of mandatory Object classes (specified in A.6.4.1) and the subset of optional Object classes (see ISO/IEC ISP 10616, A.6.4.1) for which support is claimed for the DSA (see also clause 7 for the requirements on the support of the FTAM Capability Object class); - The entry’s attributes are part of the set of mandatory attribute types (as specified in A.6.4.2) and the subset of optional attribute types (see ISO/IEC ISP 10616, A.6.4.2) for which support is claimed for the DSA. Storage and modification of entry information imply checking and mat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.