EN 13236:2001/A1:2005
(Amendment)Safety requirements for superabrasives
Safety requirements for superabrasives
This standard comprises safety requirements for the construction and testing by the manufacturer of all superabrasives (grinding wheels, cutting-off wheels, diamond wire, mounted points and other superabrasives) which are manufactured or repaired after the date of issue of the standard. The Standard does not include dressing tools including rotary truers nor any non-rotating Superabrasive tool.
Sicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder Bornitrid
Prescriptions de sécurité pour les produits superabrasifs
Varnostne zahteve za superabrazive
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2005
Varnostne zahteve za superabrazive
Safety requirements for superabrasives
Sicherheitsanforderungen für Schleifwerkzeuge mit Diamant oder Bornitrid
Prescriptions de sécurité pour les produits superabrasifs
Ta slovenski standard je istoveten z: EN 13236:2001/A1:2005
ICS:
25.100.70 Brusiva Abrasives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 13236:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2005
ICS 25.100.70
English version
Safety requirements for superabrasives
Prescriptions de sécurité pour les produits superabrasifs Sicherheitsanforderungen für Schleifwerkzeuge mit
Diamant oder Bornitrid
This amendment A1 modifies the European Standard EN 13236:2001; it was approved by CEN on 17 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13236:2001/A1:2005: E
worldwide for CEN national Members.
Foreword
This document (EN 13236:2001/A1:2005) has been prepared by Technical Committee CEN/TC 143
“Machine tools - Safety”, the secretariat of which is held by SNV.
This Amendment to the European Standard EN 13236:2001 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting
national standards shall be withdrawn at the latest by August 2005.
This document can be applied only in conjunction with EN 13236: 2001 Safety requirements for
superabrasives. Ex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.