FprEN 13480-9
(Main)Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys piping
Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys piping
This document specifies requirements for metallic industrial piping and their parts made of nickel and nickel alloys (see 3.1) in addition to the general requirements for metallic industrial piping under EN 13480 1:2017, EN 13480 2:2017, EN 13480 3:2017, EN 13480 4:2017 and EN 13480 5:2017.
NOTE Cast materials are not included in this version. Details regarding cast materials will be subject to an amendment to or a revision of this document.
Metallische industrielle Rohrleitungen - Teil 9: Zusatzanforderungen an Rohrleitungen aus Nickel und Nickellegierungen
Dieses Dokument legt zusätzlich zu den allgemeinen Anforderungen an metallische industrielle Rohrleitungen nach EN 13480 1:2017, EN 13480 2:2017, EN 13480 3:2017, EN 13480 4:2017 und EN 13480 5:2017 Anforderungen an aus Nickel und Nickellegierungen (siehe 3.1) hergestellte metallische industrielle Rohrleitungen und deren Bauteile fest.
ANMERKUNG Gusswerkstoffe sind in der vorliegenden Fassung nicht enthalten. Angaben zu Gusswerkstoffen werden in einer Änderung oder Überarbeitung dieses Dokument erfasst.
Tuyauteries industrielles métalliques - Partie 9 : Exigences complémentaires relatives aux tuyauteries en nickel et alliages de nickel
Le présent document définit les exigences relatives aux tuyauteries industrielles métalliques en nickel et alliages de nickel et à leurs parties (voir 3.1), en complément des exigences générales relatives aux tuyauteries industrielles métalliques des EN 13480 1:2017, EN 13480 2:2017, EN 13480 3:2017, EN 13480 4:2017 et EN 13480 5:2017.
NOTE La présente version ne traite pas des matériaux moulés. Les détails relatifs aux matériaux moulés feront l'objet d'un amendement ou d'une révision du présent document.
Kovinski industrijski cevovodi - 9. del: Dodatne zahteve za cevovode iz niklja in nikljevih zlitin
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13480-9:2018
01-november-2018
Kovinski industrijski cevovodi - 9. del: Dodatne zahteve za cevovode iz niklja in
nikljevih zlitin
Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys
piping
Metallische industrielle Rohrleitungen - Teil 9: Zusatzanforderungen an Rohrleitungen
aus Nickel und Nickellegierungen
Tuyauteries industrielles métalliques - Partie 9 : Exigences complémentaires relatives
aux tuyauteries en nickel et alliages de nickel
Ta slovenski standard je istoveten z: prEN 13480-9
ICS:
23.040.15 Cevi iz neželeznih kovin Non-ferrous metal pipes
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
oSIST prEN 13480-9:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13480-9:2018
---------------------- Page: 2 ----------------------
oSIST prEN 13480-9:2018
DRAFT
EUROPEAN STANDARD
prEN 13480-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2018
ICS 23.040.15
English Version
Metallic industrial piping - Part 9: Additional requirements
for nickel and nickel alloys piping
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 267.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13480-9:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13480-9:2018
prEN 13480-9:2018 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Materials . 6
5.1 General. 6
5.2 Material grouping system . 6
5.3 Material documentation . 6
5.4 Prevention of brittle fracture . 6
5.5 Lamellar tearing . 6
6 Design .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.