EN ISO 5774:2008
(Main)Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006)
ISO 5774:2006 specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from -10 °C to +60 °C.
The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C.
Kunststoffschläuche - Textilverstärkte Typen für Druckluftanwendungen - Spezifikation (ISO 5774:2006)
Diese Internationale Norm legt die Anforderungen für vier Typen von flexiblen Kunststoffschläuchen mit Textileinlage für Druckluftanwendungen in einem Temperaturbereich von − 10 °C bis + 60 °C fest.
Die vier Typen werden eingestuft in leichten Einsatzbereich mit einem maximalen Betriebsdruck von 7 bar bei 23 °C und 4,5 bar bei 60 °C, einen mittleren Einsatzbereich mit einem maximalen Betriebsdruck von 10 bar bei 23 °C und 6,5 bar bei 60 °C, einen schweren Einsatzbereich mit einem maximalen Betriebsdruck von
16 bar bei 23 °C und 11 bar bei 60 °C und einen schweren Einsatzbereich zur Anwendung im Bergbau mit einem maximalen Betriebsdruck von 25 bar bei 23 °C und 13 bar bei 60 °C.
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé - Spécifications (ISO 5774:2006)
L'ISO 5774:2006 spécifie les exigences relatives à quatre types de tuyaux souples en thermoplastique armés de textile destinés aux applications d'air comprimé pour utilisation dans la plage des températures de -10 °C à +60 °C.
Les quatre types sont classés comme suit: service léger pour une pression maximale de service de 7 bar à 23 °C et de 4,5 bar à 60 °C, service moyen pour une pression maximale de service de 10 bar à 23 °C et de 6,5 bar à 60 °C, service intensif pour une pression maximale de service de 16 bar à 23 °C et de 11 bar à 60 °C, et service intensif dans les mines pour une pression maximale de service de 25 bar à 23 °C et de 13 bar à 60 °C.
Polimerne cevi - S tekstilom okrepljene cevi za zrak pod pritiskom - Specifikacija (ISO 5774:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5774:2009
01-februar-2009
1DGRPHãþD
SIST EN ISO 5774:2000
Polimerne cevi - S tekstilom okrepljene cevi za zrak pod pritiskom - Specifikacija
(ISO 5774:2006)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
(ISO 5774:2006)
Kunststoffschläuche - Textilverstärkte Typen für Druckluftanwendungen - Spezifikation
(ISO 5774:2006)
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé -
Spécifications (ISO 5774:2006)
Ta slovenski standard je istoveten z: EN ISO 5774:2008
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 5774:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5774:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 5774:2009
EUROPEAN STANDARD
EN ISO 5774
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2008
ICS 23.040.70 Supersedes EN ISO 5774:2000
English Version
Plastics hoses - Textile-reinforced types for compressed-air
applications - Specification (ISO 5774:2006)
Tuyaux en plastique - Types armés de textile pour Kunststoffschläuche - Textilverstärkte Typen für
applications avec de l'air comprimé - Spécifications (ISO Druckluftanwendungen - Spezifikation (ISO 5774:2006)
5774:2006)
This European Standard was approved by CEN on 26 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5774:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5774:2009
EN ISO 5774:2008 (E)
Foreword
The text of ISO 5774:2006 has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 5774:2008 by Technical Committee CEN/TC 218 "Rubber and plastics hoses
and hose assemblies", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2008, and conflicting national standards
shall be withdrawn at the latest by July 2008.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any
or all such patent rights.
This document supersedes EN ISO 5774:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of ISO 5774:2006 has been approved by CEN as EN ISO 5774:2008 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5774:2009
INTERNATIONAL ISO
STANDARD 5774
Third edition
2006-07-01
Plastics hoses — Textile-reinforced types
for compressed-air applications —
Specification
Tuyaux en plastique — Types armés de textile pour applications avec
de l'air comprimé — Spécifications
Reference number
ISO 5774:2006(E)
©
ISO 2006
---------------------- Page: 5 ----------------------
SIST EN ISO 5774:2009
ISO 5774:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.