EN ISO 5774:2016
(Main)Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
ISO 5774:2016 specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.
The four types are classified as light service for a maximum working pressure of 7 bar at 23 °C and 4,5 bar at 60 °C, medium service for a maximum working pressure of 10 bar at 23 °C and 6,5 bar at 60 °C, heavy service for a maximum working pressure of 16 bar at 23 °C and 11 bar at 60 °C, and heavy service for use in mining for a maximum working pressure of 25 bar at 23 °C and 13 bar at 60 °C.
Kunststoffschläuche - Textilverstärkte Typen für Druckluftanwendungen - Anforderung (ISO 5774:2016)
Diese Internationale Norm legt die Anforderungen an vier Typen von flexiblen thermoplastischen Schläuchen mit Textileinlage für Druckluftanwendungen in einem Temperaturbereich von -10 °C bis +60 °C fest.
Die vier Typen werden eingestuft in einen leichten Einsatzbereich mit einem maximalen Betriebsdruck von 7 bar bei 23 °C und 4,5 bar bei 60 °C, einen mittleren Einsatzbereich mit einem maximalen Betriebsdruck von 10 bar bei 23 °C und 6,5 bar bei 60 °C, einen schweren Einsatzbereich mit einem maximalen Betriebsdruck von 16 bar bei 23 °C und 11 bar bei 60 °C und einen schweren Einsatzbereich zur Anwendung im Bergbau mit einem maximalen Betriebsdruck von 25 bar bei 23 °C und 13 bar bei 60 °C.
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé - Spécifications (ISO 5774:2016)
ISO 5774:2016 spécifie les exigences relatives à quatre types de tuyaux souples en thermoplastique, armés de textile, destinés aux applications d'air comprimé dans la plage de températures de −10 °C to +60 °C.
Les quatre types sont classés comme suit: service léger pour une pression maximale de service de 7 bar à 23 °C et de 4,5 bar à 60 °C, service moyen pour une pression maximale de service de 10 bar à 23 °C et de 6,5 bar à 60 °C, service intensif pour une pression maximale de service de 16 bar à 23 °C et de 11 bar à 60 °C, et service intensif dans les mines pour une pression maximale de service de 25 bar à 23 °C et de 13 bar à 60 °C.
Polimerne cevi - S tekstilom ojačene cevi za zrak pod tlakom - Specifikacija (ISO 5774:2016)
Ta mednarodni standard določa zahteve za štiri tipe s tekstilom ojačenih cevi iz plastomerov za zrak pod tlakom v temperaturnem razponu od −10 do 60 °C. Štirje tipi so razvrščeni kot majhna obremenitev za delovni tlak 7 barov pri 23 °C in 4,5 bara pri 60 °C, srednja obremenitev za največji delovni tlak 10 barov pri 23 °C in 6,5 bara pri 60 °C, velika obremenitev za največji delovni tlak 16 barov pri 23 °C in 11 barov pri 60 °C ter velika obremenitev za uporabo v rudarstvu za največji delovni tlak 25 barov pri 23 °C in 13 barov pri 60 °C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2016
1DGRPHãþD
SIST EN ISO 5774:2009
3ROLPHUQHFHYL6WHNVWLORPRMDþHQHFHYL]D]UDNSRGWODNRP6SHFLILNDFLMD ,62
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification
(ISO 5774:2016)
Kunststoffschläuche - Textilverstärkte Typen für Druckluftanwendungen - Anforderung
(ISO 5774:2016)
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé -
Spécifications (ISO 5774:2016)
Ta slovenski standard je istoveten z: EN ISO 5774:2016
ICS:
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 5774
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2016
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 5774:2008
English Version
Plastics hoses - Textile-reinforced types for compressed-
air applications - Specification (ISO 5774:2016)
Tuyaux en plastique - Types armés de textile pour Kunststoffschläuche - Textilverstärkte Typen für
applications avec de l'air comprimé - Spécifications Druckluftanwendungen - Anforderung (ISO
(ISO 5774:2016) 5774:2016)
This European Standard was approved by CEN on 21 November 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5774:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 5774:2016) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall
be withdrawn at the latest by August 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 5774:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5774:2016 has been approved by CEN as EN ISO 5774:2016 without any modification.
INTERNATIONAL ISO
STANDARD 5774
Fourth edition
2016-01-15
Plastics hoses — Textile-reinforced
types for compressed-air applications
— Specification
Tuyaux en plastique — Types armés de textile pour applications avec
de l’air comprimé — Spécifications
Reference number
ISO 5774:2016(E)
©
ISO 2016
ISO 5774:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 5774:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Couplings and end fittings . 2
6 Materials and construction . 2
7 Dimensions and tolerances . 2
7.1 Inside diameter, tolerances and minimum wall thickness . 2
7.2 Concentricity. 3
7.3 Tolerances on length . 3
8 Physical properties . 3
8.1 Plastic compounds . 3
8.1.1 Tensile strength and elongation at break of lining and cover . 3
8.1.2 Resistance to ageing . 4
8.1.3 Loss in mass on heating . 4
8.1.4 Resistance to liquids . 4
8.1.5 Hydrolysis test . 4
8.2 Performance requirements on finished hoses . 4
8.2.1 Hydrostatic requirements . 4
8.2.2 Adhesion . 5
8.2.3 Exposure to a xenon arc lamp . 5
8.2.4 Bending test . 5
8.2.5 Low-temperature flexibility . 6
9 Frequency of testing . 6
10 Marking . 6
11 Recommendations for packaging and storage . 6
12 Test report . 7
Annex A (normative) Hydrolysis test . 8
Annex B (normative) Type and routine tests .10
Annex C (informative) Production acceptance tests .11
Annex D (informative) Couplings and end fittings .12
Bibliography .13
ISO 5774:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee
SC 1, Rubber and plastics hoses and hose assemblies.
This fourth edition cancels and replaces the third edition (ISO 5774:2006), of which it constitutes a
minor revision.
The minor changes are as follows:
— Clause 2 has been updated: ISO 1746, ISO 4672 and ISO 11758 have bee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.