FprEN 14904-1
(Main)Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 1: Essential characteristics
Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 1: Essential characteristics
This document specifies essential characteristics for multi-sports floor systems designed for use in indoor sport halls and gymnasia or applies to single sport facilities designed for the following sports: volleyball, basketball, badminton, small sided football, and handball.
NOTE Physical education is considered as a multisport use.
This document specifies multi-sports floor systems, being placed onto the market either whether prefabricated as a single product or constructed in situ as a kit (e.g. a combination of two or more components).
This document specifies multi-sports floor systems, which may be affixed to the substrate either as glued, with adhesive, or as loose laid.
This document specifies:
- the methods for determination of performances of the essential characteristics,
- the methods for evaluation of the results against the threshold levels or classes of performances, where relevant,
- the way of expressing their performance,
- provisions for the systems for Assessment and Verification of Constancy of Performance,
- marking of sports floor systems.
This document does not apply to synthetic turf or textile surfaces used indoors and socket caps.
Sportböden - Mehrzweck-Sporthallenböden - Teil 1: Wesentliche Merkmale
Dieses Dokument legt Wesentliche Merkmale für Sportbodensysteme zur Mehrzwecknutzung in Sport- und Turnhallen im Innenbereich fest oder es gilt für Einrichtungen, die nur für die Ausübung einer der folgenden Sportarten konstruiert wurden: Volleyball, Basketball, Badminton, Kleinfeldfußball und Handball.
ANMERKUNG Sportunterricht wird als eine Mehrzwecknutzung angesehen.
Dieses Dokument legt Mehrzweck-Sportbodensysteme fest, die entweder in vorgefertigter Form als ein einzelnes Produkt oder als ein vor Ort konstruierter Bausatz (z. B. eine Kombination von zwei oder mehr Bauteilen) in Verkehr gebracht werden.
Dieses Dokument legt Mehrzweck-Sportbodensysteme fest, die auf der Trägerplatte befestigt werden können, indem sie entweder mit Klebstoff verklebt oder lose verlegt werden.
Dieses Dokument legt fest:
- die Verfahren zur Bestimmung der Leistung von Wesentlichen Merkmalen;
- die Verfahren zur Bewertung der Ergebnisse im Vergleich mit Schwellenwerten oder Leistungsklassen, sofern zutreffend;
- die Art, ihre Leistung anzugeben;
- Bestimmungen für Systeme zur Bewertung und Überprüfung der Leistungsbeständigkeit;
- die Kennzeichnung von Sportbodensystemen.
Dieses Dokument gilt nicht für Kunststoffrasen- oder textile Flächen, die im Innenbereich genutzt werden oder für Deckel von Bodenöffnungen.
Sols sportifs - Systèmes de sols multi-sports pour utilisation en intérieur - Partie 1 : Caractéristiques essentielles
Le présent document spécifie les caractéristiques essentielles pour les systèmes de sols multi-sports conçus pour être utilisés dans les salles de sport et les gymnases intérieurs ou s'applique aux installations conçues pour un seul des sports suivants : le volley-ball, le basket-ball, le badminton, le football en salle et le handball.
NOTE L'éducation physique est considérée comme une pratique multi-sports.
Le présent document spécifie les systèmes de sols multi-sports mis sur le marché, qu'ils soient préfabriqués en tant que produit unique ou construits en kit sur site (par exemple : une combinaison des deux composants ou plus).
Le présent document spécifie les systèmes de sols multi-sports qui peuvent être fixés sur le substrat par application de colle ou d'adhésif ou posés libre.
Le présent document spécifie :
- les méthodes de détermination des performances relatives aux caractéristiques essentielles ;
- les méthodes d'évaluation des résultats par rapport aux niveaux seuils ou aux classes de performance, le cas échéant ;
- la méthode d'expression de leur performance ;
- les dispositions relatives aux systèmes d'évaluation et de vérification de la constance des performances ;
- le marquage des systèmes sols sportifs.
Le présent document ne s'applique pas aux surfaces en gazon synthétique ou en textile utilisées en intérieur et aux capuchons de protection.
Podloge za športne dejavnosti - Sistemi večnamenskih podlog za notranjo uporabo - 1. del: Bistvene značilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14904-1:2017
01-julij-2017
3RGORJH]DãSRUWQHGHMDYQRVWL6LVWHPLYHþQDPHQVNLKSRGORJ]DQRWUDQMR
XSRUDERGHO %LVWYHQH]QDþLOQRVWL
Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 1: Essential
characteristics
Sportböden - Mehrzweck-Sporthallenböden - Teil 1: Wesentliche Merkmale
Sols sportifs - Systèmes de sols multi-sports pour utilisation en intérieur - Partie 1 :
Caractéristiques essentielles
Ta slovenski standard je istoveten z: prEN 14904-1
ICS:
97.220.10 Športni objekti Sports facilities
oSIST prEN 14904-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 14904-1:2017
oSIST prEN 14904-1:2017
DRAFT
EUROPEAN STANDARD
prEN 14904-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 97.220.10 Will supersede EN 14904:2006
English Version
Surfaces for sports areas - Multi-sports floor systems for
indoor use - Part 1: Essential characteristics
Sols sportifs - Systèmes de sols multi-sports pour portböden - Mehrzweck-Sporthallenböden - Teil 1:
utilisation en intérieur - Partie 1 : Caractéristiques Anforderungen
essentielles Surfaces for sports areas
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14904-1:2017 E
worldwide for CEN national Members.
oSIST prEN 14904-1:2017
prEN 14904-1:2017 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Essential characteristics . 8
4.1 Reaction to fire . 8
4.1.1 Classification . 8
4.1.2 Specimen preparation and conditioning . 8
4.1.3 Application rules . 8
4.1.4 Product parameters influencing reaction to fire performance . 8
4.2 Emission of formaldehyde . 9
4.3 Content of pentachlorophenol . 10
4.4 Release of other dangerous substances . 10
4.5 Linear friction . 10
4.6 Shock absorption . 10
4.6.1 Positioning of test apparatus on laboratory sample (Preparation of the sample) . 10
4.6.2 Requirements and test methods . 11
4.7 Durability . 11
4.7.1 Resistance to rolling load . 11
4.7.2 Resistance to wear . 11
5 Test reports . 12
6 Assessment and verification of constancy of performance - AVCP . 12
6.1 General . 12
6.2 Type testing . 12
6.2.1 General . 12
6.2.2 Test samples, testing and compliance criteria . 13
6.2.3 Test reports . 14
6.2.4 Shared other party results . 14
6.2.5 Cascading determination of the product type results . 15
6.3 Factory production control (FPC) . 16
6.3.1 General . 16
6.3.2 Requirements . 16
6.3.3 Product specific requirements . 19
6.3.4 Initial inspection of factory and of FPC (only applicable to products covered by AVCP
system 1) . 20
6.3.5 Continuous surveillance of FPC (only applicable to products covered by AVCP system
1) . 20
6.3.6 Procedure for modifications . 20
6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 21
7 Marking and labelling . 21
Annex A (normative) Determination of content of pentachlorophenol in sport floor systems . 22
oSIST prEN 14904-1:2017
prEN 14904-1:2017 (E)
A.1 Principle of test . 22
A.2 Apparatus and materials . 22
A.3 Sampling and specimen preparation . 22
A.4 Sample extraction and analysis . 22
A.5 Expression of results . 22
Annex B (informative) Measuring points on sample . 23
B.1 General . 23
B.2 Area-elastic sports floor with elastic construction – Example A . 23
B.3 Area-elastic sports floor with elastic construction – Example B . 25
B.4 Area-elastic sports floor with elastic construction – Example C . 27
B.5 Area-elastic sports floor with elastic construction – Example D . 29
B.6 Area-elastic sports floor with elastic construction – Example E . 31
B.7 Area-elastic sports floor with elastic layer – Example F . 33
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No.305/2011 . 35
Bibliography . 39
oSIST prEN 14904-1:2017
prEN 14904-1:2017 (E)
European foreword
This document (prEN 14904-1:2017) has been prepared by Technical Committee CEN/TC 217 “Surfaces
for sports areas”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document, together with prEN 14904-2 and prEN 14904-3, will supersede EN 14904:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential characteristics of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
The following significant technical changes have been implemented in this new edition:
— splitting the former document in 3 parts;
— all necessary characteristics for the CPR (New terminology of the CPR);
— changes of the slip resistance (upper limit);
— EoC is changed in Assessment and verification of constancy of performance – AVCP;
— Annex B “Measuring points on sample”.
EN 14904 consists of the following parts, under the general title Multi-sports floor systems for indoor use:
— Part 1: Essential characteristics
— Part 2: Specifications
— Part 3: In situ testing
oSIST prEN 14904-1:2017
prEN 14904-1:2017 (E)
Introduction
This European Standard is the first revision of EN 14904 which was first published in 2006. This standard
provides performance criteria, as mandated by CEN, for the Essential Characteristics which need to be
considered for a sports floor system that is to be used for one or more than one sport and appropriate
test methods by which these Essential Characteristics should be measured.
When setting the various performance criteria detailed within the standard, the needs of Volleyball,
Basketball, Badminton, Small sided Football, Handball and Physical Education were prioritized. Whilst
the performance criteria are applicable when one or more sports are played on a sports floor system, it
was also felt that if a facility was to be used for just one of the five aforementioned sports then this
standard would also be applicable. However, this standard may not be appropriate for single sport
centres designed for specialist sports such as Tennis or Cricket as some of the performance criteria (such
as shock absorption and angle ball rebound) are not appropriate nor are some of the test methods.
oSIST prEN 14904-1:2017
prEN 14904-1:2017 (E)
1 Scope
This European Standard specifies essential characteristics for multi-sports floor systems designed for use
in indoor sport halls an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.