EN 15227:2020/prA1:2022
(Amendment)Railway applications - Crashworthiness requirements for rail vehicles
Railway applications - Crashworthiness requirements for rail vehicles
This document specifies crashworthiness requirements applicable to new designs of:
- locomotives;
- driving vehicles operating in passenger and freight trains;
- passenger rail vehicles operating in passenger trains (such as trams, metros, mainline trains).
This document identifies common methods of providing passive safety that can be adapted to suit individual vehicle requirements.
This document specifies the characteristics of reference obstacle models for use with the design collision scenarios.
This document also specifies the requirements and methods for demonstrating that the passive safety objectives have been achieved by comparison with existing proven designs, numerical simulation, component or full-size tests, or a combination of all these methods.
Bahnanwendungen - Anforderungen für die Kollisionssicherheit von Schienenfahrzeugen
Applications ferroviaires - Exigences d'aptitude à la collision relatives aux caisses des véhicules ferroviairesferroviaires
Železniške naprave - Zahteve za zagotavljanje varnosti železniških vozil pri trčenju - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15227:2020/oprA1:2022
01-september-2022
Železniške naprave - Zahteve za zagotavljanje varnosti železniških vozil pri trčenju
- Dopolnilo A1
Railway applications - Crashworthiness requirements for rail vehicles
Bahnanwendungen - Anforderungen für die Kollisionssicherheit von Schienenfahrzeugen
Applications ferroviaires - Exigences d'aptitude à la collision relatives aux caisses des
véhicules ferroviairesferroviaires
Ta slovenski standard je istoveten z: EN 15227:2020/prA1:2022
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15227:2020/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15227:2020/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN 15227:2020/oprA1:2022
DRAFT
EUROPEAN STANDARD
EN 15227:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2022
ICS 45.060.01
English Version
Railway applications - Crashworthiness requirements for
rail vehicles
Applications ferroviaires - Exigences d'aptitude à la Bahnanwendungen - Anforderungen für die
collision relatives aux caisses des véhicules Kollisionssicherheit von Schienenfahrzeugen
ferroviairesferroviaires
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 15227:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15227:2020/prA1:2022:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15227:2020/oprA1:2022
EN 15227:2020/prA1:2022 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2, “Normative references” . 4
2 Modification to 3, “Terms and definitions” . 4
3 Modification to 3.9, “heavy duty coupler” . 4
4 Modification to 5.3, “Design collision scenarios” . 4
5 Modification to 5.4.1, “General” . 4
6 Modification to 5.4.2, “Design collision scenario for category C-I” . 4
7 Modification to 5.4.4, “Design collision scenario for category C-III” . 5
8 Modification to 5.4.6 Table 3, “Design collision scenarios and collision obstacles” . 5
9 Modification to 6.4.1, “Requirement” . 5
10 Modification to 6.4.2, “Explanatory notes (informative)” . 5
11 Modification to 6.5.1, “Requirement” . 5
12 Modification to C.2, “80 t wagon with heavy duty coupler” . 5
13 Modifica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.