EN ISO 2810:2020

Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020)

This document specifies the conditions to take into consideration when selecting the type of natural weathering and the natural weathering procedure to determine the resistance of coatings or coating systems (direct weathering or weathering behind window glass).
Natural weathering is used to determine the resistance of coatings or coating systems (denoted in this document by coatings) to the sun's radiation and the atmosphere.
This document does not take into account special atmospheric influences, e.g. industrial pollution.

Beschichtungsstoffe - Freibewitterung von Beschichtungen - Bewitterung und Bewertung (ISO 2810:2020)

Dieses Dokument legt diejenigen Bedingungen fest, die für die Art und Durchführung der Freibewitterung (direktes Bewittern oder hinter Fensterglas) zur Prüfung der Beständigkeit von Beschichtungen berücksichtigt werden müssen.
Die Freibewitterung wird angewendet, um die Beständigkeit von Beschichtungen und Beschichtungssystemen (in diesem Dokument kurz Beschichtungen genannt) gegen die Einwirkungen der Sonnenstrahlung und der Atmosphäre zu bestimmen.
Spezielle atmosphärische Einflüsse, z. B. durch industrielle Verunreinigungen, werden in diesem Dokument nicht berücksichtigt.

Peintures et vernis - Vieillissement naturel des revêtements - Exposition et évaluation (ISO 2810:2020)

Le présent document spécifie les conditions à prendre en considération lors du choix du type et de la méthode d'exposition au vieillissement naturel, afin de déterminer la résistance des revêtements et des systèmes de peinture (vieillissement direct ou derrière une vitre).
Le vieillissement naturel est utilisé pour déterminer la résistance des revêtements ou systèmes de peinture (désignés dans le présent document simplement «revêtements») au rayonnement solaire et à l'atmosphère.
Le présent document ne prend pas en compte les influences atmosphériques particulières, par exemple la pollution industrielle.

Barve in laki - Naravno staranje premazov - Izpostavljanje in ocenjevanje (ISO 2810:2020)

General Information

• Status: Published
• Publication Date: 29-Sep-2020
• Withdrawal Date: 30-Mar-2021
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Sep-2020
• Completion Date: 30-Sep-2020
• Ref Project: SIST EN ISO 2810:2020 - Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020)

Relations

• Replaces: EN ISO 2810:2004 - Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004)
• Effective Date: 07-Oct-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2810:2020
01-november-2020
Nadomešča:
SIST EN ISO 2810:2005
Barve in laki - Naravno staranje premazov - Izpostavljanje in ocenjevanje (ISO
2810:2020)
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO
2810:2020)
Beschichtungsstoffe - Freibewitterung von Beschichtungen - Bewitterung und Bewertung
(ISO 2810:2020)
Peintures et vernis - Vieillissement naturel des revêtements - Exposition et évaluation
(ISO 2810:2020)
Ta slovenski standard je istoveten z: EN ISO 2810:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2810:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 2810:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 2810:2020


EN ISO 2810
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2810:2004
English Version

Paints and varnishes - Natural weathering of coatings -
Exposure and assessment (ISO 2810:2020)
Peintures et vernis - Vieillissement naturel des Beschichtungsstoffe - Freibewitterung von
revêtements - Exposition et évaluation (ISO Beschichtungen - Bewitterung und Bewertung (ISO
2810:2020) 2810:2020)
This European Standard was approved by CEN on 28 August 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2810:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 2810:2020
EN ISO 2810:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 2810:2020
EN ISO 2810:2020 (E)
European foreword
This document (EN ISO 2810:2020) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2810:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 2810:2020 has been approved by CEN as EN ISO 2810:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 2810:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 2810:2020
INTERNATIONAL ISO
STANDARD 2810
Third edition
2020-09
Paints and varnishes — Natural
weathering of coatings — Exposure
and assessment
Peintures et vernis — Vieillissement naturel des revêtements —
Exposition et évaluation
Reference nu
...