EN ISO 4126-2:2003

Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)

ISO 4126-2:2003 specifies the requirements for bursting disc safety devices.
ISO 4126-2:2003 includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging.
The requirements for the application, selection and installation of bursting disc safety devices are given in ISO 4126-6.

Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 2: Berstscheibeneinrichtungen (ISO 4126-2:2003)

Dieser Teil der Norm legt Anforderungen an Berstscheibeneinrichtungen fest. Er legt ferner die Anforderungen fest für Konstruktion, Herstellung, Überwachung, Prüfung, Bescheinigung, Kennzeichnung und Verpackung. Die Anforderungen für Auswahl, Anwendung und Anordnung von Berstscheibeneinrichtungen sind im Teil 6 dieser Norm enthalten.

Dispositifs de sécurité pour la protection contre les pressions excessives - Partie 2: Dispositifs de sûreté à disque de rupture (ISO 4126-2:2003)

L'ISO 4126-2:2003 spécifie les prescriptions applicables aux dispositifs de sûreté à disque de rupture.
L'ISO 4126-2:2003 comprend les prescriptions de conception, de fabrication, de contrôle, d'essai, de marquage, de certification et de conditionnement.
Les prescriptions concernant l'application, la sélection et l'installation des dispositifs de sûreté à disque de rupture sont indiquées dans l'ISO 4126-6.

Naprave za varovanje pred visokim tlakom - 2. del: Naprave z razpočnimi membranami (ISO 4126-2:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2003
• Withdrawal Date: 12-Mar-2019
• ICS: 13.240 - Protection against excessive pressure
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 10 - Safety devices against excessive pressure
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Mar-2019
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 4126-2:2003 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)

Relations

• Replaced By: EN ISO 4126-2:2019 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)
• Effective Date: 13-May-2014
• Corrected By: EN ISO 4126-2:2003/AC:2006 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
• Effective Date: 08-Jun-2022
• Corrected By: EN ISO 4126-2:2003/AC:2004 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4126-2:2003
01-julij-2003
1DSUDYH]DYDURYDQMHSUHGYLVRNLPWODNRPGHO1DSUDYH]UD]SRþQLPL
PHPEUDQDPL,62
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety
devices (ISO 4126-2:2003)
Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 2:
Berstscheibeneinrichtungen (ISO 4126-2:2003)
Dispositifs de sécurité pour la protection contre les pressions excessives - Partie 2:
Dispositifs de sureté a disque de rupture (ISO 4126-2:2003)
Ta slovenski standard je istoveten z: EN ISO 4126-2:2003
ICS:
13.240 Varstvo pred previsokim Protection against excessive
tlakom pressure
SIST EN ISO 4126-2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4126-2:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 4126-2:2003
EUROPEAN STANDARD
EN ISO 4126-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2003
ICS 13.240
English version
Safety devices for protection against excessive pressure - Part
2: Bursting disc safety devices (ISO 4126-2:2003)
Dispositifs de sécurité pour la protection contre les Sicherheitseinrichtungen gegen unzulässigen Überdruck -
pressions excessives - Partie 2: Dispositifs de sûreté à Teil 2: Berstscheibeneinrichtungen (ISO 4126-2:2003)
disque de rupture (ISO 4126-2:2003)
This European Standard was approved by CEN on 9 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4126-2:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4126-2:2003
EN ISO 4126-2:2003 (E)
Contents
page
Foreword.4
Introduction .5
1 Scope .5
2 Normative references .5
3 Terms and definitions.7
4 Materials.9
4.1 Selection of materials.9
4.2 Material specifications .10
4.3 Protection from corrosion.10
5 Types of bursting discs.10
5.1 Conventional domed bursting discs (forward acting) .10
5.2 Reverse domed bursting discs (reverse acting).11
5.3 Flat bursting discs .11
5.4 Other types and designs.
...