EN 71-7:2014+A1:2017

Safety of toys - Part 7: Finger paints - Requirements and test methods

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren

Dieser Teil der EN 71 legt Anforderungen an die in Fingermalfarben verwendeten Stoffe und Materialien fest und gilt nur für Fingermalfarben.
Für Beschriftung, Kennzeichnung und Behälter sind zusätzliche Anforderungen festgelegt.

Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai

La présente partie de l'EN 71 fixe des exigences relatives aux substances et produits utilisés dans les peintures au doigt et s’applique uniquement aux peintures au doigt.
Des exigences complémentaires sont données pour le marquage, l'étiquetage et l'emballage.

Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode (vključno z dopolnilom A1)

Ta del standarda EN 71 določa zahteve za snovi in materiale, ki se uporabljajo v prstnih barvah in veljajo samo za prstne barve.
Dodatne zahteve so določene za označevanje, etiketiranje in embalažo.

General Information

• Status: Withdrawn
• Publication Date: 26-Sep-2017
• Withdrawal Date: 20-Feb-2018
• ICS: 97.200.50 - Toys
• Technical Committee: CEN/TC 52 - Safety of toys
• Drafting Committee: CEN/TC 52/WG 5 - Safety of toys - Chemical toys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Feb-2018
• Directive: 2009/48/EC - DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys
• Mandate: M/445 - Standardisation mandate addressed to CEN and CENELEC within the framework of Directive 2009/48/EC revising Directive 88/378/EEC concerning the safety of Toys
• Ref Project: SIST EN 71-7:2014+A1:2017 - Safety of toys - Part 7: Finger paints - Requirements and test methods

Relations

• Merged Into: EN 71-7:2014+A2:2018 - Safety of toys - Part 7: Finger paints - Requirements and test methods
• Effective Date: 18-Jan-2023
• Merged From: EN 71-7:2014/FprA1 - Safety of toys - Part 7: Finger paints - Requirements and test methods
• Effective Date: 18-Jan-2023
• Merged From: EN 71-7:2014 - Safety of toys - Part 7: Finger paints - Requirements and test methods
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2017
1DGRPHãþD
SIST EN 71-7:2014
9DUQRVWLJUDþGHO3UVWQHEDUYH=DKWHYHLQSUHVNXVQHPHWRGHYNOMXþQR]
GRSROQLORP$
Safety of toys - Part 7: Finger paints - Requirements and test methods
Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren
Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 71-7:2014+A1:2017
ICS:
97.200.50 ,JUDþH Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 71-7:2014+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 97.200.50 Supersedes EN 71-7:2014
English Version
Safety of toys - Part 7: Finger paints - Requirements and
test methods
Sécurité des jouets - Partie 7: Peintures au doigt - Sicherheit von Spielzeug - Teil 7: Fingermalfarben -
Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 8 February 2014 and includes Amendment 1 approved by CEN on 31 August
2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-7:2014+A1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Requirements . 9
4.1 General . 9
4.2 Colourants . 9
4.3 Preservatives . 10
4.4 Migration of certain elements . 10
4.5 Limits for impurities . 10
4.5.1 Limits for primary aromatic amines . 10
4.5.2 Limits for other impurities . 11
4.6 Taste and smell . 12
4.7 pH-value . 12
4.8 Binding agents, extenders, humectants and surfactants . 12
4.9 N-Nitrosamines . 12
4.10 Containers . 13
5 Product information . 13
5.1 General . 13
5.2 Marking . 13
5.2.1 Primary packaging . 13
5.2.2 Container . 14
Annex A (informative) Non-exhaustive list of colourants which are commonly used in finger
paints, and need to be in compliance with both the general and specified purity
requirements . 15
Annex B (normative) List of preservatives allowed for use in finger paints . 21
Annex C (informative) Ingredients used in the manufacture of finger paints . 26
Annex D (normative) Method for the detection of certain azo colourants and determination
of free primary aromatic amines . 28
D.1 General . 28
D.2 Reagents . 29
D.3 Apparatus . 30
D.4 Instrumentation . 30
D.5 Sampling procedure . 30
D.6 Procedure. 30
D.7 Calculation . 40
D.8 Precision . 41
D.8.1 Linearity . 41
D.8.2 Limits of Detection (LOD) and Quantification (LOQ) . 41
D.8.3 Repeatability and reproducibility data for soluble aromatic amines . 42
D.8.4 Repeatability and reproducibility data for reductively cleaved aromatic amines . 43
D.8.5 Recovery . 44
D.9 Report . 46
D.10 Additional Information . 46
Annex E (normative) Method for the determination of hexachlorobenzene, polychlorinated
biphenyls and benzo[α]pyrene . 47
E.1 Principle . 47
E.2 Standards, reagents and solvents . 47
E.3 Apparatus . 49
E.4 Instrumentation . 49
E.5 Sampling . 50
E.6 Procedure . 50
E.6.1 General . 50
E.6.2 Sample preparation . 50
E.6.3 Solvent extraction . 50
E.6.4 Solid phase extraction . 51
E.6.5 Sample concentration for determining HCB and PCB congeners . 51
E.6.6 Sample concentration for determining B[α]P . 51
E.6.7 Gas chromatography conditions . 51
E.6.8 Mass spectrometry . 52
E.6.9 SIM mode . 52
E.7 Calculation. 57
E.8 Precision . 59
E.8.1 Linearity . 59
E.8.2 Limits of detection (LOD) and Quantification (LOQ) . 59
E.8.3 Repeatability and reproducibility data for HCB, PCB congeners and B[α]P . 59
E.8.4 Recovery . 60
E.9 Report . 60
E.10 Additional information . 61
Annex F (informative) Rationale . 64
F.1 Finger paints (see 3.1 and 3.2) . 64
F.2 Colourants (see 4.2.1) . 64
F.3 Preservatives (see 4.3) . 64
F.4 Elements (see 4.4) . 64
F.5 Primary aromatic amines (see 4.5.1.2, Tables 1 and 2 and Annex D) . 64
F.6 Limit for Benzo[α]Pyrene (see
...