EN 14592:2008
(Main)Timber structures - Dowel-type fasteners - Requirements
Timber structures - Dowel-type fasteners - Requirements
This European Standard specifies the requirements and test methods for materials, geometry, strength, stiffness and durability ascpects (i.e. corrosion protection) of dowel-type fasteners for use in load bearing timber structures.
Only dowel-type fasteners manufactured from steel are covered by this European Standard. For the purpose of this standard, dowel-type fasteners for timber structures are taken to be nails, staples, screws, dowels, and bolts with nuts. Definitions of these items are given in Clause 3. This European Standard specifies also the evaluation of conformity procedures and includes requirements for marking of these products.
This European Standard does not cover resin coated dowel-type fasteners and fasterners treated with fire retardants to improve their fire performance. It also does not cover resin coated fasteners.
Holzbauwerke - Stiftförmige Verbindungsmittel - Anforderungen
Diese Europäische Norm legt die Anforderungen an und Prüfverfahren für die Werkstoffe, die Geometrie, die Festigkeit, die Steifigkeit und die Dauerhaftigkeit (d. h. den Korrosionsschutz) von stiftförmigen Verbindungs¬mitteln zum Einsatz in tragenden Holzbauwerken fest.
Die vorliegende Europäische Norm deckt nur stiftförmige Verbindungsmittel ab, die aus Stahl hergestellt werden. Für die Anwendung dieser Norm umfassen stiftförmige Verbindungsmittel für Holzbauwerke Nägel, Klammern, Schrauben, Stabdübel und Bolzen mit Muttern. Die Definitionen dieser Elemente sind in Abschnitt 3 angegeben. Die vorliegende Europäische Norm legt auch die Verfahren zur Bewertung der Konformität dieser Erzeugnisse fest und enthält Anforderungen an deren Kennzeichnung.
Diese Europäische Norm behandelt keine harzbeschichteten stiftförmigen Verbindungsmittel und Verbindungsmittel, die mit Flammschutzmitteln behandelt wurden, um ihr Brandverhalten zu verbessern. Sie behandelt keine harzbeschichteten Verbindungsmittel.
Structures en bois - Eléments de fixation - Exigences
La présente Norme européenne spécifie les exigences et méthodes d’essai des matériaux ainsi que des aspects géométriques, de résistance, de rigidité et de durabilité (c’est-à-dire la protection contre la corrosion) des éléments de fixation pour l’utilisation dans des structures portantes en bois.
Seuls les éléments de fixation fabriqués en acier sont couverts par la présente norme européenne. Pour les besoins de la présente norme, les éléments de fixation pour structures en bois sont considérés comme étant des pointes, agrafes, vis, broches et boulons avec écrous. Ces éléments sont définis à l’article 3. La présente norme européenne spécifie également les procédures d'évaluation de conformité et inclut des exigences pour le marquage de ces produits.
La présente norme européenne ne couvre pas les éléments de fixation avec revêtement en résine ni les connecteurs traités avec des produits ignifuges pour améliorer leurs performances au feu. Elle ne couvre également pas les connecteurs avec revêtement en résine.
Lesene konstrukcije - Paličasta vezna sredstva - Zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Stiftförmige Verbindungsmittel - AnforderungenStructures en bois - Elémens de fixation - ExigencesTimber structures - Dowel-type fasteners - Requirements91.080.20Lesene konstrukcijeTimber structures21.060.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 14592:2008SIST EN 14592:2009en,fr,de01-december-2009SIST EN 14592:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14592October 2008ICS 91.080.20 English VersionTimber structures - Dowel-type fasteners - RequirementsStructures en bois - Eléments de fixation - ExigencesHolzbauwerke - Stiftförmige Verbindungsmittel -AnforderungenThis European Standard was approved by CEN on 9 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14592:2008: ESIST EN 14592:2009
Expression of corrosion protection specifications.32 Annex B (normative)
Method of determining the torsion resistance to insertion of screws into timber.33 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Contruction Products Directive.35 Bibliography.41
Only dowel-type fasteners manufactured from steel are covered by this European Standard. For the purpose of this standard, dowel-type fasteners for timber structures are taken to be nails, staples, screws, dowels, and bolts with nuts.
Definitions of these items are given in Clause 3. This European Standard specifies also the evaluation of conformity procedures and includes requirements for marking of these products. This European Standard does not cover resin coated dowel-type fasteners and fasterners treated with fire retardants to improve their fire performance. It also does not cover resin coated fasteners. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 409, Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails EN 1382, Timber structures - Test methods - Withdrawal capacity of timber fasteners EN 1383:1999, Timber structures - Test methods - Pull-through resistance of timber fasteners EN 1995-1-1:2004, Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings EN 10016 (all parts), Non-alloy steel r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.