EN ISO 16000-2:2006

Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004)

ISO 16000-2:2004 is intended as an aid to planning formaldehyde indoor pollution measurements. In the case of indoor air measurements, the careful planning of sampling and the entire measurement strategy are of particular significance, since the result of the measurement can have far-reaching consequences, for example, with regard to the need for remedial action or the success of such an action.

Innenraumluftverunreinigungen - Teil 2: Probenahmestrategie für Formaldehyd (ISO 16000-2:2004)

Dieser Teil der ISO 16000 legt Hilfestellungen zur Planung von Messungen der Luftverunreinigungen in
Innenräumen fest 1) . Die sorgfältige Planung der Probenahme und der gesamten Messstrategie ist bei Innen-raumluftuntersuchungen
von besonderer Tragweite, da das Untersuchungsergebnis erhebliche
Konsequenzen haben kann, so z. B. hinsichtlich eines Sanierungsbedarfs oder des Erfolges einer Sanierung.

Air intérieur - Partie 2: Stratégie d'échantillonnage du formaldéhyde (ISO 16000-2:2004)

L'ISO 16000-2:2004 est destinée à faciliter la planification des mesurages de la pollution au formaldéhyde dans l'air intérieur . Dans le cas de mesurages dans l'air intérieur, la planification soigneuse de l'échantillonnage et la stratégie globale d'échantillonnage jouent un rôle particulièrement important car le résultat obtenu lors du mesurage peut être lourd de conséquences en ce qui concerne, par exemple, la nécessité d'établir des actions correctives ou le succès de telles actions.

Notranji zrak – 2. del: Strategija vzorčenja formaldehida (ISO 16000-2:2004)

General Information

• Status: Published
• Publication Date: 04-Apr-2006
• ICS: 13.040.20 - Ambient atmospheres
• Technical Committee: CEN/TC 264 - Air quality
• Drafting Committee: CEN/TC 264 - Air quality
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 15-Oct-2010
• Completion Date: 15-Oct-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 16000-2:2006 - Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16000-2:2006
01-julij-2006
1RWUDQML]UDN±GHO6WUDWHJLMDY]RUþHQMDIRUPDOGHKLGD,62
Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004)
Innenraumluftverunreinigungen - Teil 2: Probenahmestrategie für Formaldehyd (ISO
16000-2:2004)
Air intérieur - Partie 2: Stratégie d'échantillonnage du formaldéhyde (ISO 16000-2:2004)
Ta slovenski standard je istoveten z: EN ISO 16000-2:2006
ICS:
13.040.20
SIST EN ISO 16000-2:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 16000-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 13.040.20

English Version
Indoor air - Part 2: Sampling strategy for formaldehyde (ISO
16000-2:2004)
Air intérieur - Partie 2: Stratégie d'échantillonnage du Innenraumluftverunreinigungen - Teil 2:
formaldéhyde (ISO 16000-2:2004) Probenahmestrategie für Formaldehyd (ISO 16000-2:2004)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16000-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 16000-2:2006 (E)
Foreword
The text of ISO 16000-2:2004 has been prepared by Technical Committee ISO/TC 146 “Air quality” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 16000-2:2006 by
Technical Committee CEN/TC 264 “Air quality” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at
the latest by October 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
Endorsement notice
The text of ISO 16000-2:2004 has been approved by CEN as a EN ISO 16000-2:2006 without any
modification.
ISO 16000 consists of the following parts, under the general title Indoor air — :
 Part 1: General aspects of sampling strategy
 Part 2: Measurement strategy for formaldehyde
 Part 3: Determination of formaldehyde and other carbonyl compounds – Active sampling method
 Part 4: Determination of formaldehyde – Diffusive sampling method
 Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on
Tenax TA sorbent, thermal desorption and gas-chromatography using MS/FID
The following parts of ISO 16000 are under preparation:
 Part 5: Sampling strategy for volatile organic compounds (VOCs)
 Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
 Part 8: Ventilation rate measurement
 Part 9: Determination of the emission of volatile organic compounds – Emission test chamber method
 Part 10: Determination of the emission of volatile organic compounds – Emission test cell method
 Part 11: Determination of the emission of volatile organic compounds – Sampling, storage of samples and
preparation of test specimens
2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 16000-2
First edition
2004-07-01


Indoor air —
Part 2:
Sampling strategy for formaldehyde
Air intérieur —
Partie 2: Stratégie d'échantillonnage du formaldéhyde





Reference numb
...