Information supplied by the manufacturer of medical devices

This standard specifies requirements for information to be supplied by a manufacturer for medical devices regulated by Council Directive 90/385/EEC relating to active implantable medical devices and Council Directive 93/42/EEC concerning medical devices. It does not specify the language to be used for such information, nor does it specify the means by which the information is to be supplied. It is also intended to complement the specific requirements of the cited EU Directives on medical devices by providing guidance on means by which certain requirements can be met. If a manufacturer follows these means, they will provide a presumption of conformity with the relevant Essential Requirements regarding information to be supplied. This standard does not cover requirements for provision of information for in vitro diagnostic medical devices, which are covered by other labelling standards (see Bibliography).

Bereitstellung von Informationen durch den Hersteller von Medizinprodukten

Informations fournies par le fabricant de dispositifs médicaux

Informacije, ki jih proizvajalec priloži medicinskim pripomočkom - Dopolnilo A1

General Information

Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
Due Date
Completion Date


Buy Standard

EN 1041:2008/kFprA1:2013
English language
5 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 1041:2008/kFprA1:2013
Information supplied by the manufacturer of medical devices
Bereitstellung von Informationen durch den Hersteller von Medizinprodukten
Informations fournies par le fabricant de dispositifs médicaux
Ta slovenski standard je istoveten z: EN 1041:2008/FprA1
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
11.040.01 Medicinska oprema na Medical equipment in general
SIST EN 1041:2008/kFprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1041:2008/kFprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 1041:2008/kFprA1:2013

EN 1041:2008

January 2013
ICS 01.110; 11.040.01; 11.120.01

English version
Information supplied by the manufacturer of medical devices
Informations fournies par le fabricant de dispositifs Bereitstellung von Informationen durch den Hersteller von
médicaux Medizinprodukten
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee

This draft amendment A1, if approved, will modify the European Standard EN 1041:2008. If this draft becomes an amendment, CEN and
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN and CENELEC in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-
CENELEC Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2013 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 1041:2008/FprA1:2013 E
worldwide for CEN national Members and for CENELEC

---------------------- Page: 3 ----------------------

SIST EN 1041:2008/kFprA1:2013
EN 1041:2008/FprA1:2013 (E)
Contents Page
Foreword . 3
1 Modifications to Clause 2 . 4
2 Modification to 4.2 . 4
3 Modification to 5.1 . 4
4 Modifications to the Bibliography . 5


---------------------- Page: 4 ----------------------

SIST EN 1041:2008/kFprA1:2013
EN 1041:2008/FprA1:2013 (E)
This document (EN 1041:2008/FprA1:2013) has been prepared by Technical Committee CEN/CLC/TC 3
“Quality management and corresponding general aspects for medical devices”, the secretariat of which is held
by NEN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annex ZA and ZB, which are integral parts of this



Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.