EN 4842:2023

Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)

This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted (ESR or VAR)
Solution treated and precipitation treated (H1025)
Bars for machining
a or D ≤ 250 mm
1 070 MPa ≤ Rm ≤ 1 200 MPa
Premium quality (pq)
for aerospace applications.
NOTE   Other designation: The ASD-STAN designation of this material is FE-PM1802.
Only the chemical composition of this document are to be considered.

Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen (ESR oder VAR) - Lösungsgeglüht und ausscheidungsgehärtet (H1025) - Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)

Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR ou VAR) - Mis en solution et précipité (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)

Le présent document spécifie les exigences relatives à :
Acier X5CrNiCu15-5 (1.4545)
Refondu à l'électrode consommable (ESR ou VAR)
Mis en solution et précipité (H1025)
Barres pour usinage
a ou D ≤ 250 mm
1 070 MPa ≤ Rm ≤ 1 200 MPa
Première qualité (pq)
pour les applications aérospatiales.
NOTE   Autre désignation : la désignation ASD-STAN du présent matériau est FE-PM1802.
Seule la composition chimique du présent document doit être prise en compte.

Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) - Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250 mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)

Ta dokument določa zahteve, ki se navezujejo na:
jeklo X5CrNiCu15-5 (1.4545),
pretaljeno s talilno elektrodo (ESR ali VAR),
topilno žarjeno in izločevalno utrjeno (H1025),
palice za obdelavo,
a ali D ≤ 250 mm,
1070 MPa ≤ Rm ≤ 1200 MPa,
visoke stopnje kakovosti (pq)
za uporabo v aeronavtiki.
OPOMBA: Druga oznaka: Oznaka ASD-STAN tega materiala je FE-PM1802.
Upošteva se le kemijska sestava v skladu s tem dokumentom.

General Information

• Status: Published
• Publication Date: 10-Oct-2023
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Oct-2023
• Completion Date: 11-Oct-2023
• Ref Project: SIST EN 4842:2023 - Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)

Relations

• Replaces: EN 4842:2019 - Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4842:2023
01-december-2023
Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali
VAR) - Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D
≤ 250 mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)
Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted
(ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining -
a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen (ESR oder VAR) - Lösungsgeglüht und ausscheidungsgehärtet (H1025)
- Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200
MPa - Beste Güte (pq)
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable
(ESR ou VAR) - Mis en solution et précipité (H1025) - Barres pour usinage - a ou D ≤
250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)
Ta slovenski standard je istoveten z: EN 4842:2023
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 4842:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4842:2023

---------------------- Page: 2 ----------------------
SIST EN 4842:2023


EN 4842
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2023
EUROPÄISCHE NORM
ICS 49.025.15 Supersedes EN 4842:2019
English Version

Aerospace series - Steel X5CrNiCu15-5 (1.4545) -
Consumable electrode remelted (ESR or VAR) - Solution
treated and precipitation treated (H1025) - Bars for
machining - a or D  250 mm - 1 070 MPa  Rm  1 200
MPa - Premium quality (pq)
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) -
Refondu à l'électrode consommable (ESR ou VAR) - Mis Mit selbstverzehrender Elektrode umgeschmolzen
en solution et précipité (H1025) - Barres pour usinage (ESR oder VAR) - Lösungsgeglüht und
ausscheidungsgehärtet (H1025) - Stangen zur
- a ou D  250 mm - 1 070 MPa  Rm  1 200 MPa -
Première qualité (pq) spanenden Bearbeitung - a oder D  250 mm - 1 070
MPa  Rm  1 200 MPa - Beste Güte (pq)
This European Standard was approved by CEN on 16 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4842:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4842:2023
EN 4842:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
Bibliography .
...