Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)

This document specifies the requirements relating to:
X5CrNiCu15-5 (1.4545)
Consumable electrode remelted (ESR or VAR)
Solution treated and precipitation treated (H1025)
Bar for machining
a or D ≤ 250 mm
1 070 MPa ≤ Rm ≤ 1 200 MPa
Premium quality (pq)
for aerospace applications.
NOTE Other designation:
Only the chemical composition of this standard must be considered.

Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen (ESR oder VAR - lösungsgeglüht und ausgelagert (H1025) - Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)

Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR ou VAR) - Mis en solution et vieilli (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)

Aeronavtika - X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) - Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250 mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)

Ta dokument določa zahteve, ki se nanašajo na:
X5CrNiCu15-5 (1.4545)
pretaljene s talilno elektrodo (ESR ali VAR),
topilno žarjene in izločevalno utrjene (H1025),
palice za obdelavo,
a ali D ≤ 250 mm,
1070 MPa ≤ Rm ≤ 1200 MPa,
visoke stopnje kakovosti (pq)
za uporabo v aeronavtiki.
OPOMBA: Druga oznaka:
Treba je upoštevati le kemijski sestav tega standarda.

General Information

Status
Published
Publication Date
28-May-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
29-May-2019
Completion Date
29-May-2019

RELATIONS

Buy Standard

Standard
EN 4842:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 4842:2019
01-september-2019

Aeronavtika - X5CrNiCu15-5 (1.4545) - Pretaljeno s talilno elektrodo (ESR ali VAR) -

Topilno žarjeno in izločevalno utrjeno (H1025) - Palice za obdelavo - a ali D ≤ 250

mm - 1070 MPa ≤ Rm ≤ 1200 MPa - Visoka stopnja kakovosti (pq)
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or

VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D ≤

250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)
Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen (ESR oder VAR - lösungsgeglüht und ausgelagert (H1025) - Stangen
zur spanenden Bearbeitung - a oder D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa -
Beste Güte (pq)

Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR

ou VAR) - Mis en solution et vieilli (H1025) - Barres pour usinage - a ou D ≤ 250 mm - 1

070 MPa ≤ Rm ≤ 1 200 MPa - Première qualité (pq)
Ta slovenski standard je istoveten z: EN 4842:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
SIST EN 4842:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4842:2019
---------------------- Page: 2 ----------------------
SIST EN 4842:2019
EN 4842
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version
Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable
electrode remelted (ESR or VAR) - Solution treated and
precipitation treated (H1025) - Bar for machining - a or D
≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium
quality (pq)

Série aérospatiale - X5CrNiCu15-5 (1.4545) - Refondu à Luft- und Raumfahrt - X5CrNiCu15-5 (1.4545) - Mit

l'électrode consommable (ESR ou VAR) - Mis en selbstverzehrender Elektrode umgeschmolzen (ESR

solution et vieilli (H1025) - Barres pour usinage - a ou oder VAR - lösungsgeglüht und ausgelagert (H1025) -

D ≤ 250 mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Première Stangen zur spanenden Bearbeitung - a oder D ≤ 250

qualité (pq)
mm - 1 070 MPa ≤ Rm ≤ 1 200 MPa - Beste Güte (pq)
This European Standard was approved by CEN on 14 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4842:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4842:2019
EN 4842:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction ..................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions .................................................................................................................................... 6

4 Requirements ................................................................................................................................................... 6

---------------------- Page: 4 ----------------------
SIST EN 4842:2019
EN 4842:2019 (E)
European foreword

This document (EN 4842:2019) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of ASD,

prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by November 2019, and conflicting national standards shall be withdrawn

at the latest by November 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 5 ----------------------
SIST EN 4842:2019
EN 4842:2019 (E)
Introduction

This document is part of the series of EN metallic material standards for aerospace applications. The

general organization of this series is described in EN 4258.
This document has been prepared in accordance with EN 4500-005.
---------------------- Page: 6 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.