Anti-glare screens for roads - Part 1: Performance and characteristics

This standard specifies the characteristics of an anti-glare system in terms of their optical effectiveness and the mechanical performance of its elements. Performance criteria are specified in relation to tests provided in the accompanying EN: Anti-Glare Systems - Test Methods. Optical performance of the AGS may also be determined by calculation as specified in the present standard, clause 5.1.1. This standard also makes recommendations for the design of AGS to minimize maintenance.

Blendschutzzäune für Straßen - Teil 1: Anforderungen und Eigenschaften

Blendschutzzäune für Straßen - Teil 1: Anforderungen und Eigenschaften

Diese Europäische Norm wurde im Rahmen des Mandates M/111 �Circulation Fixtures", das dem CEN von der Europäischen Kommission und der Europäischen Freihandelszone erteilt wurde, erarbeitet.
Die Abschnitte dieser und, wenn relevant, einer anderen in diesem Anhang aufgeführten Europäischen Norm entsprechen den Anforderungen dieses Mandats, das im Rahmen der EU-Bauproduktenrichtlinie (89/106/EU) erteilt wurde.
Die Übereinstimmung mit diesen Abschnitten lässt die Eignung des Werkstoffes für Blendschutzzäune für die hierin angegebenen Anwendungen vermuten.
WARNHINWEIS - Andere Anforderungen und andere EU-Richtlinien, die die Eignung für eine beabsichtigte Anwendung nicht beeinträchtigen, können für Blendschutzzäune für Straßen gelten, die in den Anwendungs-bereich dieser Europäischen Norm fallen.
Zusätzlich zu den konkreten Abschnitten dieser Norm, die sich auf gefährliche Substanzen beziehen, kann es weitere Anforderungen an die Produkte geben, die in den Anwendungsbereich dieser Norm fallen (z. B. umge-setzte europäische Rechtsvorschriften und nationale Rechts- und Verwaltungsvorschriften). Um die Bestimmungen der EU-Bauproduktenrichtlinie zu erfüllen, ist es notwendig, die besagten Anforderungen, sofern sie Anwendung finden, ebenfalls einzuhalten.
ANMERKUNG   Eine Informations-Datenbank über europäische und nationale Bestimmungen über gefährliche Substanzen ist auf der Construction-Web-Site über EUROPA (CREATE, Zugang über http://europa.eu.int) verfügbar.
Dieser Anhang stellt die Bedingungen für die CE-Kennzeichnung von Blendschutzzäunen für Straßen auf, die für die in Tabelle ZA.1 und den relevanten anwendbaren Abschnitten aufgezeigten Verwendungen bestimmt sind.
Der Anwendungsbereich dieses Anhangs ist in Tabelle ZA.1 festgelegt.

Zasloni proti bleščanju - 1. del: Lastnosti in karakteristike

General Information

Status
Published
Publication Date
15-Apr-2003
Withdrawal Date
30-May-2005
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Apr-2003
Completion Date
16-Apr-2003

Relations

Buy Standard

Amendment
EN 12676-1:2002/A1:2004
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12676-1:2002/A1:2004
01-januar-2004
=DVORQLSURWLEOHãþDQMXGHO/DVWQRVWLLQNDUDNWHULVWLNH
Anti-glare screens for roads - Part 1: Performance and characteristics
Blendschutzzäune für Straßen - Teil 1: Anforderungen und Eigenschaften
Blendschutzzäune für Straßen - Teil 1: Anforderungen und Eigenschaften
Ta slovenski standard je istoveten z: EN 12676-1:2000/A1:2003
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 12676-1:2002/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12676-1:2002/A1:2004

---------------------- Page: 2 ----------------------

SIST EN 12676-1:2002/A1:2004
EUROPEAN STANDARD
EN 12676-1:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2003
ICS 93.080.30
English version
Anti-glare screens for roads - Part 1: Performance and
characteristics
Ecrans anti-éblouissement routiers - Partie 1: Blendschutzzäune für Straßen - Teil 1: Anforderungen und
Performances et caractéristiques Eigenschaften
This amendment A1 modifies the European Standard EN 12676-1:2000; it was approved by CEN on 9 January 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12676-1:2000/A1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12676-1:2002/A1:2004
EN 12676-1:2000/A1:2003 (E)
Foreword
This document (EN 12676-1:2000/A1:2003) has been prepared by Technical Committee CEN/TC 226 "Road
equipment", the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 12676-1:2000 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by October 2003, and conflicting national
standards shall be withdrawn at the latest by January 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 12676-1:2002/A1:2004
EN 12676-1:2000/A1:2003 (E)
General modification
In the title, and in the text of the standard, we replace "anti-glare systems" by "anti-glare screens".
4.4.2 Metallic elements
Replaced the last sentence " After exposure of the metallic elements of the anti-glare system to the salt spray test,
as described in ISO 9227, there shall be no evidence of corrosion, such as rust stains or blistering of the coating."
by the following:
"Hot dipped galvanised steel components shall conform to ISO 1459 and ISO 1461."
4.5 Effectiveness with respect to glare
4.5.1. General
Add the following at the end of 4.5.1 :
"Two types of products are distinguished:
. those designed in order to "block out all the incident rays". They have to comply with the geometrical
condition tan aj ‡ 0,33. This condition is checked by calculation (4.5.2);
. those which do not comply with the condition tan j 0,33, designed in order to "block out partiallya‡
the incident rays". They have to fulfil the threshold value indicated in 4.5.3. This characteristic is
determined by test (4.5.3)".
5 Marking
To make the following modification on the first paragraph "Each anti-glare screen shall carry the
following information, affixed in a readab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.