EN 1459-5:2020/FprA1

Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

This document specifies requirements for the truck side of the attachment interface of rough-terrain non-slewing and slewing variable reach trucks (hereafter referred to as "trucks") dealt with in EN 1459-1:2017+A1:2020, EN 1459-2:2015+A1:2018 and EN 1459-4:2020.
This document covers the interface for the attachments fitted to the telescopic boom carriage or mounted on the forks when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document does not cover:
- interface for interchangeable equipment designed for lifting person(s) (covered by EN 1459-3:2015);
- interface for equipment for container handling (e.g. spreader);
- interface for equipment permanently installed on the machine and not intended to be removed by the user.
NOTE In this case, equipment becomes part of the truck.
This document does not give requirements for the completed assembly of a truck fitted with an attachment. This document does not address risks to parts of the truck other than the interface with the attachment.
This document is not applicable to interfaces manufactured before the date of its publication.

Geländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zugehörige Schnittstellen

Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 5 : Interface de l'accessoire

Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 5. del: Pripadajoči vmesniki - Dopolnilo A1

General Information

• Status: Not Published
• Publication Date: 26-Mar-2025
• ICS: 53.060 - Industrial trucks
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150/WG 2 - Variable reach trucks
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 04-Oct-2024
• Completion Date: 04-Oct-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1459-5:2021/oprA1:2023 - Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

Relations

• Amends: EN 1459-5:2020 - Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
• Effective Date: 04-May-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2023
Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 5.
del: Pripadajoči vmesniki - Dopolnilo A1
Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface
Geländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil
5: Zugehörige Schnittstellen
Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 5 : Interface de
l'accessoire
Ta slovenski standard je istoveten z: EN 1459-5:2020/prA1
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 1459-5:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2023
ICS 53.060
English Version
Rough-terrain trucks - Safety requirements and
verification - Part 5: Attachment interface
Chariots tout-terrain - Prescriptions de sécurité et Geländegängige Stapler - Sicherheitstechnische
vérification - Partie 5 : Interface de l'accessoire Anforderungen und Verifizierung - Teil 5: Zugehörige
Schnittstellen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 150.

This draft amendment A1, if approved, will modify the European Standard EN 1459-5:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1459-5:2020/prA1:2023 E
worldwide for CEN national Members.

EN 1459-5:2020/prA1:2023 (E)
Contents
European foreword . 3
1 Modification to Clause 1, Scope . 4
2 Modification to Clause 2, Normative references . 4
3 Modification to Clause 3, Terms and definitions . 4
4 Modification to Table 1 .
...