iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 760:1996

(Main)

Welding consumables - Fluxes for submerged arc welding - Classification

Welding consumables - Fluxes for submerged arc welding - Classification

This standard applies to fluxes for the submerged arc welding of non alloyed, low alloy and high alloy steels such as stainless and heat resisting steels and of nickel and nickel alloys using wire electrodes and strip electrodes.

Schweißzusätze - Pulver zum Unterpulverschweißen - Einteilung

Diese Norm gilt für Schweißpulver zum Unterpulverschweißen mit Draht- und Bandelektroden von unlegierten, niedriglegierten und hochlegierten nichtrostenden und hitzebeständigen Stählen sowie von Nickel und Nickellegierungen.

Produits consommables pour le soudage - Flux pour le soudage à l'arc sous flux - Classification

La présente norme s'applique aux flux pour le soudage à l'arc sous flux des aciers non alliés, faiblement alliés et fortement alliés tels que les aciers inoxydables et les aciers réfractaires, du nickel et des alliages de nickel au moyen d'électrodes sous forme de fils et de feuillards.

Dodajni materiali za varjenje - Varilni praški za varjenje pod praškom - Razvrstitev

General Information

Status
Withdrawn
Publication Date
19-Mar-1996
Withdrawal Date
31-Jan-2012
ICS
25.160.20 - Welding consumables
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121/WG 3 - Welding consumables
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2012
Completion Date
01-Feb-2012
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 760:1996 - Welding consumables - Fluxes for submerged arc welding - Classification

Relations

Replaced By
EN ISO 14174:2012 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
Effective Date
08-Feb-2012

Buy Standard

EN 760:1996EN 760:1996
PreviousNext
Standard + National Annex and/or Foreword
EN 760:1996
Foreword and/or annex in Slovenian language, body of the standard in German language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 636:2024(Main)
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2024)
oSIST prEN ISO 636:2024

This document specifies requirements for classification of rods, wires and deposits in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine-grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.
This document is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
a)       Components which carry the suffix “system A” are applicable only to rods, wires and deposits classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this document.
b)       Components which carry the suffix “system B” are applicable only to rods, wires and deposits classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this document.
c)        Components which have neither the suffix “system A” nor the suffix “system B” are applicable to all rods, wires and deposits classified in accordance with this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 544:2024(Main)
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2024)
SIST EN ISO 544:2024

This document specifies technical delivery conditions for filler materials and fluxes for fusion welding.
This document does not apply to other auxiliary materials such as shielding gases.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14344:2024(Main)
Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2024)
SIST EN ISO 14344:2024

This document specifies tools for communication between a purchaser and a supplier of welding consumables within quality systems, such as those based upon ISO 9001.
This document, together with an applicable welding consumable standard (ISO or other), provides a method for preparing the specific details needed for welding consumable procurement which consists of:
a)       the welding consumable classification (selected from the applicable welding consumable standard);
b)       the lot classification (selected from Clause 4);
c)        the testing schedule (selected from Clause 5).
Selection of the specific welding consumable classification, lot classification, and testing schedule depends upon the requirements of the application for which the welding consumable is being procured.
This document does not apply to non-consumable electrodes or shielding gases.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18276:2024(Main)
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2024)
SIST EN ISO 18276:2024

This document specifies the requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used with more than one.
This document is a combined specification providing classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal.
—     Subclauses and tables which carry the suffix “system A” are applicable only to tubular cored electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this document.
—     Subclauses and tables which carry the suffix “system B” are applicable only to tubular cored electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this document.
—     Subclauses and tables which do not have either the suffix “system A” or the suffix “system B” are applicable to all tubular cored electrodes classified under this document.
It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current but, for the purposes of this document, pulsed current is not used for determining the electrode classification.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12224-2:2024(Main)
Solder wire, solid and flux-cored - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:2024)
SIST EN ISO 12224-2:2024

This document specifies two methods for the determination of the flux content of a sample flux-cored solder wire.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14172:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
SIST EN ISO 14172:2023

This document prescribes requirements for the classification of nickel and nickel-alloy covered
electrodes for manual metal arc welding and overlaying. The classification of the covered electrodes is
based on the chemical composition of their deposited all-weld metal. It includes those compositions in
which the nickel content exceeds that of any other element.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18274:2023(Main)
Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023)
SIST EN ISO 18274:2023

This document specifies requirements for classification of solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition. It includes those compositions in which the nickel content exceeds that of any other element.
The principles of this document can be applied to metal powders for cladding, hard facing and additive manufacturing.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14700:2022(Main)
Welding consumables - Welding consumables for hard-facing
SIST EN 14700:2023

This document is applicable to welding consumables for hardfacing. The range of application includes surfaces of new structural components, semi-finished products as well as repair of surfaces of structural components which have to resist to mechanical, chemical, thermal or combined stress.
This document specifies requirements for classification of the consumables based on their chemical composition of the all-weld metal of covered electrodes, cored wires, cored rods, cored strips, sintered strips, sintered rods and metal powders and on the chemical composition of solid wires, solid rods, solid strips and cast rods.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12153:2022(Main)
Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022)
SIST EN ISO 12153:2023

This document specifies requirements for the classification of tubular-cored electrodes for metal arc welding with or without a gas shield of nickel and nickel alloys. It includes those compositions in which the nickel content exceeds that of any other element.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day