EN ISO 14174:2012

Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)

ISO 14174:2012 specifies requirements for classification of fluxes for submerged arc welding and electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes, and strip electrodes.

Schweißzusätze - Pulver zum Unterpulverschweißen und Elektroschlackeschweißen - Einteilung (ISO 14174:2012)

Diese Internationale Norm gilt für Pulver zum Unterpulverschweißen und Elektroschlackeschweißen mit Draht-, Fülldraht- und Bandelektroden zum Verbindungs- und Auftragschweißen.

Produits consommables pour le soudage - Flux pour le soudage à l'arc sous flux et le soudage sous laitier - Classification (ISO 14174:2012)

L'ISO 14174:2012 spécifie les exigences de classification des flux pour le soudage à l'arc sous flux et le soudage sous laitier pour l'assemblage et le rechargement par soudage au moyen de fils-électrodes, de fils-électrodes fourrés et de feuillards.

Dodajni materiali za varjenje - Praški za varjenje pod praškom in varjenje pod žlindro - Razvrstitev (ISO 14174:2012)

Ta standard se uporablja za praške za varjenje pod praškom nelegiranega, malolegiranega in močnolegiranega jekla, kot sta nerjavno in toplotno odporno jeklo, ter niklja in nikljevih zlitin z žičnimi in tračnimi elektrodami.

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2012
• Withdrawal Date: 14-May-2019
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-May-2019
• Ref Project: SIST EN ISO 14174:2012 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)

Relations

• Replaces: EN 760:1996 - Welding consumables - Fluxes for submerged arc welding - Classification
• Effective Date: 08-Feb-2012
• Replaced By: EN ISO 14174:2019 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
• Effective Date: 07-Jun-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14174:2012
01-maj-2012
1DGRPHãþD
SIST EN 760:1996
Dodajni materiali za varjenje - Praški za varjenje pod praškom in varjenje pod
žlindro - Razvrstitev (ISO 14174:2012)
Welding consumables - Fluxes for submerged arc welding and electroslag welding -
Classification (ISO 14174:2012)
Schweißzusätze - Pulver zum Unterpulverschweißen und Elektroschlackeschweißen -
Einteilung (ISO 14174:2012)
Produits consommables pour le soudage - Flux pour le soudage à l'arc sous flux et le
soudage électrique sous laitier - Classification (ISO 14174:2012)
Ta slovenski standard je istoveten z: EN ISO 14174:2012
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 14174:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14174:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 14174:2012


EUROPEAN STANDARD
EN ISO 14174

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2012
ICS 25.160.20 Supersedes EN 760:1996
English Version
Welding consumables - Fluxes for submerged arc welding and
electroslag welding - Classification (ISO 14174:2012)
Produits consommables pour le soudage - Flux pour le Schweißzusätze - Pulver zum Unterpulverschweißen und
soudage à l'arc sous flux et le soudage sous laitier - Elektroschlackeschweißen - Einteilung (ISO 14174:2012)
Classification (ISO 14174:2012)
This European Standard was approved by CEN on 28 January 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14174:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14174:2012
EN ISO 14174:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14174:2012
EN ISO 14174:2012 (E)
Foreword
This document (EN ISO 14174:2012) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 760:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14174:2012 has been approved by CEN as a EN ISO 14174:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14174:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 14174:2012
INTERNATIONAL ISO
STANDARD 14174
Second edition
2012-02-01
Welding consumables — Fluxes for
submerged arc welding and electroslag
welding
...