iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 21670:2014

(Main)

Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)

Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)

ISO 21670:2014 specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) or d = 8 mm to 16 mm (fine pitch thread), of product grade A. Weld nuts conforming to ISO 21670:2014 are suitable for use with bolts of property classes up to 10.9 according to ISO 898‑1.

Mechanische Verbindungselemente - Sechskant-Schweißmuttern mit Flansch (ISO 21670:2014)

Diese Internationale Norm legt Eigenschaften von Sechskant-Schweißmuttern mit Flansch mit metrischem Regelgewinde von M5 bis M16 oder metrischem Feingewinde mit Gewinde-Nenndurchmesser D von 8 mm bis 16 mm in Produktklasse A fest.
Schweißmuttern nach dieser Norm sind zur Verschraubung mit Schrauben der Festigkeitsklassen bis einschließlich 10.9 nach ISO 898-1 geeignet.

Fixations - Écrous hexagonaux à souder, à embase plate (ISO 21670:2014)

L'ISO 21670:2014 spécifie les caractéristiques des écrous à souder, à embase, de diamètre de filetage M5 à M16 inclus (pas gros) et de M8 à M16 inclus (pas fin), et de grade A. Les écrous à souder conformes à L'ISO 21670:2014 sont appropriés pour être utilisés avec des vis de classe de qualité jusqu'à 10.9 inclus selon l'ISO 898-1.

Vezni elementi - Šestroba matica s krajcem za privarjenje (ISO 21670:2014)

EN ISO 21670 določa lastnosti šestrobih matic s krajcem za privarjenje velikosti M5 do M16 (grobi navoj) ali premera D = 8 mm do 16 mm (fini navoj) razreda izdelave A. Matice za privarjenje, ki so skladne s tem mednarodnim standardom, so primerne za uporabo z vijaki razredov trdnosti do 10.9 v skladu s standardom ISO 898-1.

General Information

Status
Published
Publication Date
20-May-2014
Withdrawal Date
29-Nov-2014
ICS
21.060.20 - Nuts
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-May-2014
Due Date
09-Dec-2014
Completion Date
21-May-2014
Ref Project
SIST EN ISO 21670:2014 - Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)

Relations

Replaces
EN ISO 21670:2003 - Hexagon weld nuts with flange (ISO 21670:2003)
Effective Date
28-May-2014

Buy Standard

EN ISO 21670:2014EN ISO 21670:2014
PreviousNext
Standard
EN ISO 21670:2014
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21670:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 21670:2004
Vezni elementi - Šestroba matica s krajcem za privarjenje (ISO 21670:2014)
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
Sechskant-Schweißmuttern mit Flansch (ISO 21670:2014)
Fixations - Écrous hexagonaux à souder, à embase plate (ISO 21670:2014)
Ta slovenski standard je istoveten z: EN ISO 21670:2014
ICS:
21.060.20 Matice Nuts
SIST EN ISO 21670:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 21670:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 21670:2014

EUROPEAN STANDARD
EN ISO 21670

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 21.060.20 Supersedes EN ISO 21670:2003
English Version
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
Fixations - Écrous hexagonaux à souder, à embase plate Mechanische Verbindungselemente - Sechskant-
(ISO 21670:2014) Schweißmuttern mit Flansch (ISO 21670:2014)
This European Standard was approved by CEN on 13 April 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21670:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 21670:2014
EN ISO 21670:2014 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 21670:2014
EN ISO 21670:2014 (E)
Foreword
This document (EN ISO 21670:2014) has been prepared by Technical Committee ISO/TC 2 “Fasteners” in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 21670:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 21670:2014 has been approved by CEN as EN ISO 21670:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 21670:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 21670:2014
INTERNATIONAL ISO
STANDARD 21670
Second edition
2014-05-15
Fasteners — Hexagon weld nuts with
flange
Fixations — Écrous hexagonaux à souder, à embase plate
Reference number
ISO 21670:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 21670:2014
ISO 21670:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 8674:2023(Main)
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO 8674:2023)
SIST EN ISO 8674:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8675:2023(Main)
Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)
SIST EN ISO 8675:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric fine pitch thread 8 mm to 64 mm, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8673:2023(Main)
Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)
SIST EN ISO 8673:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
NOTE       For nuts with sizes D > 39 mm, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4035:2023(Main)
Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
SIST EN ISO 4035:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric coarse pitch thread M1,6 to M64, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4033:2023(Main)
Fasteners - Hexagon high nuts (style 2) (ISO 4033:2023)
SIST EN ISO 4033:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4032:2023(Main)
Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)
SIST EN ISO 4032:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE            For nuts with sizes D < M5 and D > M39, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-2:2022(Main)
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)
SIST EN ISO 898-2:2022

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature range of 10 °C to 35 °C.
This document applies to nuts:
—    with ISO metric thread (see ISO 68-1),
—    with diameter/pitch combinations according to ISO 261 and ISO 262,
—    with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—    with thread tolerances according to ISO 965-1, ISO 965-2 or ISO 965-5,
—    with specified property classes 04, 05, 5, 6, 8, 10 and 12 including proof load,
—    of three different nut styles (see 5.1): regular nuts (style 1), high nuts (style 2) and thin nuts (style 0),
—    with a minimum outside diameter or width across flats s ≥ 1,45D,
—    able to mate with bolts, screws and studs with property classes in accordance with ISO 898-1 (see Annex B), and
—    intended to be used in applications ranging from –50 °C to +150 °C, or up to +300 °C.
WARNING — Nuts conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –50 °C to +150 °C; however, these nuts are also used outside this range and up to +300 °C for specific applications. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on the service environment conditions of the assembly (see also 7.1).
For additional specifications applicable to hot dip galvanized nuts, see ISO 10684.
For nuts designed for particular applications, see ISO/TR 16224.
This document does not specify requirements for functional properties such as:
—    prevailing torque properties (see ISO 2320),
—    torque/clamp force properties (see ISO 16047 for test method),
—    weldability, or
—    corrosion resistance.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-3:2018/A1:2021(Amendment)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
SIST EN ISO 898-3:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3506-2:2020(Main)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
SIST EN ISO 3506-2:2020

This document specifies the mechanical and physical properties of nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for nuts.
ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties.
Nuts conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures.
NOTE 1  Fasteners conforming to the requirements of this document are used without restriction in applications ranging from ?20 °C to +150 °C; however, fasteners conforming to this document are also used for applications outside this range down to ?196 °C and up to +300 °C. For more details, see ISO 3506-6.
Outside the temperature range of ?20 °C to +150 °C, it is the responsibility of the user to determine the appropriate choice for a given application, in consultation with an experienced fastener metallurgist and by taking into account e.g. stainless steel composition, duration of exposure at elevated or low temperature, the effect of the temperature on the fastener mechanical properties and clamped parts, and the corrosive service environment of the bolted joint.
NOTE 2  ISO 3506‑5[1] is developed in order to assist in the selection of appropriate stainless steel grades and property classes intended for use at temperatures up to +800 °C.
This document applies to nuts:
—     with ISO metric thread in accordance with ISO 68‑1,
—     with diameter/pitch combinations in accordance with ISO 261 and ISO 262,
—     with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—     with thread tolerances in accordance with ISO 965‑1 and ISO 965‑2,
—     with specified property classes, including proof load,
—     with different nut styles: thin nuts, regular nuts and high nuts,
—     with a minimum nut height m ≥ 0,45D,
—     with a minimum outside diameter or width across flats s ≥ 1,45D (see Annex A),
—     of any shape, and
—     able to mate with bolts, screws and studs with property classes in accordance with ISO 3506‑1.
Stainless steel grades and property classes can be used for sizes outside the diameter limits of this document (i.e. for D < 5 mm or D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met.
This document does not specify requirements for functional properties such as:
—     torque/clamp force properties,
—     prevailing torque properties, or
—     weldability.
[1] Under preparation.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-3:2018(Main)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
SIST EN ISO 898-3:2018

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898‑1 and ISO 898‑2.
NOTE 1    These types of washers can also be used with other fasteners such as screws forming their own mating thread.
Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures.
NOTE 2    Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications.
This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm:
—          plain washers (with or without knurls, ribs or chamfers);
—          square washers;
—          square hole washers;
—          shaped plates.
It does not specify requirements for the following properties:
—          corrosion resistance;
—          weldability.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day