EN 13763-23:2002

Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube

This EN describes a method for determining the shock-wave velocity of the shock tube of a non-electric detonator. NOTE This determination can be carried out at the same time as the determination of the delay accuracy, as described in prEN (WI 321037).

Explosivestoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 23: Bestimmung der Stoßwellengeschwindigkeit in Zündschläuchen

Diese europäische Norm beschreibt ein Verfahren zur Bestimmung der Stoßwellengeschwindigkeit der Zündschläuchen von nicht-elektrischen Zündern. ANMERKUNG Diese Bestimmung kann zusammen mit der Bestimmung der Genauigkeit der Verzögerung, die in prEN ... Teil 16 (WI 0321037) beschrieben ist, ausgeführt werden.

Explosifs à usage civil - Détonateurs et relais - Partie 23: Détermination de la vitesse d'ondes de choc du tube conducteur d'ondes de choc

La présente Norme européenne spécifie une méthode de détermination de la vitesse d'onde de choc des tubes à transmission d'ondes de choc utilisés avec les détonateurs non-électriques.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 23. del: Ugotavljanje hitrosti udarnega vala detonacijskih cevk

General Information

• Status: Published
• Publication Date: 24-Sep-2002
• Withdrawal Date: 30-Mar-2003
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-Jan-2018
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-23:2002 - Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube

Relations

• Revised: FprEN 13763-23 - Explosives for civil uses - Detonators and detonating cord relays - Part 23: Verification of the shock wave velocity of shock tubes
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 23. del: Ugotavljanje hitrosti udarnega vala detonacijskih cevkExplosivestoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 23: Bestimmung der Stoßwellengeschwindigkeit in ZündschläuchenExplosifs a usage civil - Détonateurs et relais - Partie 23: Détermination de la vitesse d'ondes de choc du tube conducteur d'ondes de chocExplosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-23:2002SIST EN 13763-23:2002en01-december-2002SIST EN 13763-23:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-23September 2002ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 23:Determination of the shock-wave velocity of shock tubeExplosifs à usage civil - Détonateurs et relais - Partie 23:Détermination de la vitesse d'ondes de choc du tubeconducteur d'ondes de chocExplosivestoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 23: Bestimmung derStoßwellengeschwindigkeit in ZündschläuchenThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-23:2002 E

Range of applicability ot the test method.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.8
...