EN 4113:2009
(Main)Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
This European Standard specifies the required characteristics of loop style clamps (“P” type) in corrosion resisting steel, passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert, mit Profilgummi - Maße, Massen
Diese Norm legt die Anforderungen an Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl,
passiviert, mit verschiedenen Profilgummi-Werkstoffen fest.
Diese Schellen werden zur Halterung von Rohrleitungen und elektrischen Leitungsbündeln in der Luft- und
Raumfahrt verwendet.
Für den Temperaturbereich und die Umweltbedingungen siehe die Angaben in den jeweiligen Werkstoffnormen
für Profilgummi.
Série aérospatiale - Colliers en ''P'' en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, masses
Aeronavtika - Objemke v obliki zanke (P-oblika) iz korozijsko odpornega jekla, z zaščitno prevleko iz gume - Mere, mase
Ta evropski standard opredeljuje zahtevane značilnosti objemk v obliki zanke (P-oblika) iz korozijsko odpornega jekla, z različnimi zaščitnimi prevlekami. Te objemke se uporabljajo v aeronavtiki za podporo cevnih spojev in svežnje električnih kablov. Za temperaturni razpon in okoljske vidike glej standarde za različne materiale za zaščitno prevleko.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert mit Profilgummi - Maße, MassenSérie aérospatiale - Colliers en ''P'' en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, massesAerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses49.030.99Drugi vezni elementiOther fastenersICS:Ta slovenski standard je istoveten z:EN 4113:2009SIST EN 4113:2010en01-januar-2010SIST EN 4113:2010SLOVENSKI
STANDARDSIST EN 4113:20021DGRPHãþD
SIST EN 4113:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4113
October 2009 ICS 49.030.99 Supersedes EN 4113:2001English Version
Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses Série aérospatiale - Colliers en ''P'' en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, masses
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert mit Profilgummi - Maße, Massen This European Standard was approved by CEN on 5 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4113:2009: ESIST EN 4113:2010
EN 4113:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Required characteristics .44Designation . 105Marking . 106Technical specification . 10 SIST EN 4113:2010
EN 4113:2009 (E) 3 Foreword This document (EN 4113:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4113:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.