EN ISO 21546:2020

Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)

This document specifies a method for determining the resistance of a coating to rubbing by means of a loaded abrasive material which is linearly moved over the surface to be tested.
The method can also be applied to different material surfaces, such as plastics and metals.

Beschichtungsstoffe - Bestimmung des Widerstandes gegen Verkratzen mit einem Linearhubgerät (Crockmeter) (ISO 21546:2019)

Peintures et vernis - Détermination de la résistance à la rayure avec un abrasimètre linéaire (ISO 21546:2019)

Le présent document spécifie une méthode permettant de déterminer la résistance à la rayure d'un revêtement au moyen d'un matériau abrasif soumis à une charge qui est déplacé linéairement sur la surface à soumettre à essai.
La méthode peut également s'appliquer à différents types de surface de matériau, tels que les plastiques et les métaux.

Barve in laki - Ugotavljanje odpornosti proti drgnjenju z aparatom za vzdolžno drgnjenje (crockmeter) (ISO 21546:2019)

General Information

• Status: Published
• Publication Date: 08-Dec-2020
• Withdrawal Date: 29-Jun-2021
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 09-Dec-2020
• Due Date: 01-Aug-2022
• Completion Date: 09-Dec-2020
• Ref Project: SIST EN ISO 21546:2021 - Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21546:2021
01-marec-2021
Barve in laki - Ugotavljanje odpornosti proti drgnjenju z aparatom za vzdolžno
drgnjenje (crockmeter) (ISO 21546:2019)
Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion
tester (crockmeter) (ISO 21546:2019)
Beschichtungsstoffe - Bestimmung des Widerstandes gegen Verkratzen mit einem
Linearhubgerät (Crockmeter) (ISO 21546:2019)
Peintures et vernis - Détermination de la résistance à la rayure avec un abrasimètre
linéaire (ISO 21546:2019)
Ta slovenski standard je istoveten z: EN ISO 21546:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 21546:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21546:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 21546:2021


EN ISO 21546
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version

Paints and varnishes - Determination of the resistance to
rubbing using a linear abrasion tester (crockmeter) (ISO
21546:2019)
Peintures et vernis - Détermination de la résistance à la Beschichtungsstoffe - Bestimmung des Widerstandes
rayure avec un abrasimètre linéaire (ISO 21546:2019) gegen Verkratzen mit einem Linearhubgerät
(Crockmeter) (ISO 21546:2019)
This European Standard was approved by CEN on 30 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21546:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 21546:2021
EN ISO 21546:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 21546:2021
EN ISO 21546:2020 (E)
European foreword
The text of ISO 21546:2019 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 21546:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21546:2019 has been approved by CEN as EN ISO 21546:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 21546:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 21546:2021
INTERNATIONAL ISO
STANDARD 21546
First edition
2019-02
Paints and varnishes — Determination
of the res
...