Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-6:2019)

This document specifies a method for identifying entry marks, which can occur during electro-deposition coating. Entry marks can often occur in the form of streaks when the workpiece, either set as cathode or anode, is immersed in the electro-deposition tank under applied electric potential (relation of voltage and current). These marks occur parallel to the bath surface on the objects to be coated.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

Beschichtungsstoffe - Elektrotauchlacke - Teil 6: Eintauchmarkierungen (ISO 22553-6:2019)

Dieses Dokument legt ein Verfahren zum Erkennen von Eintauchmarkierungen, wie sie bei der Elektro-tauchlack-Beschichtung (ETL Beschichtung) auftreten können, fest. Eintauchmarkierungen können beim Eintauchen des als Kathode bzw. Anode geschalteten Werkstücks bei angelegtem elektrischem Potential (Verhältnis von Spannung und Strom) in das ETL Bad häufig in Form von Streifen auftreten. Diese markieren sich parallel zur Badoberfläche auf den Beschichtungsobjekten.
Es ist anzuwenden für Elektrotauchlacke für Fahrzeuge und andere allgemeine industrielle Anwendungen, z. B. Kühl¬elemente, Konsumgüter, Heizkörper, Luftfahrt, Landwirtschaft.

Peintures et vernis - Peintures d'électrodéposition - Partie 6: Repères d'immersion (ISO 22553-6:2019)

Le présent document spécifie une méthode d'identification des repères d'immersion, qui peuvent se produire lors d'une application par électrodéposition. Les repères d'immersion peuvent souvent prendre la forme de stries lorsque la pièce, définie comme cathode ou anode, est immergée dans la cuve d'électrodéposition soumise à un potentiel électrique appliqué (relation de la tension et du courant). Ces marques apparaissent parallèlement à la surface du bain sur les objets à revêtir.
Il est applicable aux peintures d'électrodéposition destinées aux industries automobiles et autres applications industrielles générales, par ex. unités frigorifiques, biens de consommation, radiateurs, aérospatial, agriculture.

Barve in laki - Elektrodepozicijski premazi - 6. del: Potopni markerji (ISO 22553-6:2019)

General Information

Status
Published
Publication Date
01-Dec-2020
Withdrawal Date
29-Jun-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Dec-2020
Due Date
01-Aug-2022
Completion Date
02-Dec-2020

Buy Standard

Standard
EN ISO 22553-6:2021
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 22553-6:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22553-6:2021
01-januar-2021
Barve in laki - Elektrodepozicijski premazi - 6. del: Potopni markerji (ISO 22553-
6:2019)
Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-
6:2019)
Beschichtungsstoffe - Elektrotauchlacke - Teil 6: Eintauchmarkierungen (ISO 22553-
6:2019)
Peintures et vernis - Peintures d'électrodéposition - Partie 6: Repères d'immersion (ISO
22553-6:2019)
Ta slovenski standard je istoveten z: EN ISO 22553-6:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 22553-6:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22553-6:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 22553-6:2021


EN ISO 22553-6
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version

Paints and varnishes - Electro-deposition coatings - Part 6:
Entry marks (ISO 22553-6:2019)
Peintures et vernis - Peintures d'électrodéposition - Beschichtungsstoffe - Elektrotauchlacke - Teil 6:
Partie 6: Repères d'immersion (ISO 22553-6:2019) Eintauchmarkierungen (ISO 22553-6:2019)
This European Standard was approved by CEN on 30 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22553-6:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22553-6:2021
EN ISO 22553-6:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22553-6:2021
EN ISO 22553-6:2020 (E)
European foreword
The text of ISO 22553-6:2019 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22553-6:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22553-6:2019 has been approved by CEN as EN ISO 22553-6:2020 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 22553-6:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 22553-6:2021
INTERNATIONAL ISO
STANDARD 22553-6
First edition
2019-10
Paints and varnishes —
Electro-deposition coatings —
Part 6:
Entry marks
Peintures et vernis — Peintures d'électrodéposition —
Partie 6: Repères d'immersion
Reference number
ISO 22553-6:2
...

SLOVENSKI STANDARD
oSIST prEN ISO 22553-6:2020
01-september-2020
Barve in laki - Nanašanje premazov z elektrodepozicijo - 6. del: Potopni markerji
(ISO 22553-6:2019)
Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-
6:2019)
Beschichtungsstoffe - Elektrotauchlacke - Teil 6: Eintauchmarkierungen (ISO 22553-
6:2019)
Peintures et vernis - Peintures d'électrodéposition - Partie 6: Repères d'immersion (ISO
22553-6:2019)
Ta slovenski standard je istoveten z: prEN ISO 22553-6
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 22553-6:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22553-6:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22553-6:2020
INTERNATIONAL ISO
STANDARD 22553-6
First edition
2019-10
Paints and varnishes —
Electro-deposition coatings —
Part 6:
Entry marks
Peintures et vernis — Peintures d'électrodéposition —
Partie 6: Repères d'immersion
Reference number
ISO 22553-6:2019(E)
©
ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22553-6:2020
ISO 22553-6:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22553-6:2020
ISO 22553-6:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
6 Test panels . 3
7 Number of determinations . 4
8 Procedure. 4
9 Evaluation . 5
9.1 Visual evaluation . 5
9.2 Determination of the dry-film thickness . 6
10 Precision . 6
11 Test report .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.