EN 15334:2007
(Main)Sanitary appliances - Methacrylic dispersions of high filler content
Sanitary appliances - Methacrylic dispersions of high filler content
This European Standard specifies test methods for measuring characteristics of pure methacrylic dispersions and sanitary appliances produced from dispersions by polymerisation.
Sanitärausstattungsgegenstände - Hochgefüllte Methacryl Dispersionen
Appareils sanitaires - Dispersions méthacryliques à taux de charge élevée
La présente Norme européenne spécifie des méthodes d’essai permettant de mesurer les caractéristiques des dispersions méthacryliques et des appareils sanitaires produits à partir de ces dispersions par polymérisation.
Sanitarne naprave - Metakrilne disperzije z visoko vsebnostjo polnila
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitary appliances - Methacrylic dispersions of high filler contentSanitarne naprave - Metakrilne disperzije z visoko vsebnostjo polnilaAppareils sanitaires - Dispersions méthacryliques a taux de charge élevéeSanitärausstattungsgegenstände - Hochgefüllte Methacryl DispersionenTa slovenski standard je istoveten z:EN 15334:2007SIST EN 15334:2007en;fr;de91.140.70Sanitarne napraveSanitary installationsICS:SLOVENSKI
STANDARDSIST EN 15334:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15334February 2007ICS 91.140.70 English VersionSanitary appliances - Methacrylic dispersions of high fillercontentAppareils sanitaires - Dispersions méthacryliques à taux decharge élevéeSanitärausstattungsgegenstände - Hochgefüllte MethacrylDispersionenThis European Standard was approved by CEN on 13 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15334:2007: E
EN 15334:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and Definitions.4 4 Characteristics of dispersion.5 5 Test methods.5 5.1 Tests on dispersion.5 5.1.1 Ash content.5 5.1.2 Agglomeration.6 5.1.3 Contamination.7 5.1.4 Density.7 5.1.5 Viscosity.8 5.1.6 Shrinkage during curing.10 5.2 Tests on finished part.11 5.2.1 General.11 5.2.2 Water absorption.11 5.2.3 Impact strength.11 5.2.4 Flexural modulus and flexural strength.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.