EN 1402-4:2003

Unshaped refractory products - Part 4: Determination of consistency of castables

This European standard describes methods for the determination of the consistency of dense and insulating castables as defined in ENV 1402-1.

Ungeformte feuerfeste Erzeugnisse - Teil 4: Bestimmung der Konsistenz von Feuerbetonen

Diese Europäische Norm legt Verfahren zur Bestimmung der Konsistenz von dichten und wärmedämmenden Feuerbetonen, wie sie in EN 1402-1 definiert sind, fest.

Produits réfractaires non façonnés - Partie 4: Détermination de la consistance des bétons

La présente Norme Européenne décrit des méthodes pour la détermination de la consistance des bétons denses et isolants tels que définis dans Ie prEN 1402-1.

Neoblikovani ognjevzdržni izdelki - 4. del: Ugotavljanje konsistence gostih litih betonov

General Information

• Status: Withdrawn
• Publication Date: 14-Oct-2003
• Withdrawal Date: 30-Nov-2012
• ICS: 81.080 - Refractories
• Technical Committee: CEN/TC 187 - Refractory products and materials
• Drafting Committee: CEN/TC 187/WG 2 - Unshaped refractory materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2012
• Completion Date: 01-Dec-2012
• Ref Project: SIST EN 1402-4:2004 - Unshaped refractory products - Part 4: Determination of consistency of castables

Relations

• Replaces: ENV 1402-4:1999 - Unshaped refractory products - Part 4: Determination of consistency of castables
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 1927-4:2012 - Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neoblikovani ognjevzdržni izdelki - 4. del: Ugotavljanje konsistence gostih litih betonovUngeformte feuerfeste Erzeugnisse - Teil 4: Bestimmung der Konsistenz von FeuerbetonenProduits réfractaires non façonnés - Partie 4: Détermination de la consistance des bétonsUnshaped refractory products - Part 4: Determination of consistency of castables81.080Ognjevzdržni materialiRefractoriesICS:Ta slovenski standard je istoveten z:EN 1402-4:2003SIST EN 1402-4:2004en01-maj-2004SIST EN 1402-4:2004SLOVENSKI
STANDARDSIST ENV 1402-4:20001DGRPHãþD



SIST EN 1402-4:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1402-4October 2003ICS 81.080Supersedes ENV 1402-4:1999English versionUnshaped refractory products - Part 4: Determination ofconsistency of castablesProduits réfractaires non façonnés - Partie 4:Détermination de la consistance des bétonsUngeformte feuerfeste Erzeugnisse - Teil 4: Bestimmungder Konsistenz von FeuerbetonenThis European Standard was approved by CEN on 20 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1402-4:2003 ESIST EN 1402-4:2004



EN 1402-4:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Apparatus.55Procedure.75.1Determination of the consistency of insulating castables.75.2Determination of the consistency of vibratable castables.76Test report.9SIST EN 1402-4:2004



EN 1402-4:2003 (E)3ForewordThis document (EN 1402-4:2003) has been prepared by Technical Committee CEN/TC 187 "Refractory productsand materials", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2004, and conflicting national standards shall be withdrawn at the latest byApril 2004.This document supersedes ENV 1402-4:1999.EN 1402 “Unshaped refractory products” consists of eight parts:¾ Part 1: Introduction and classification¾ Part 2: Sampling for testing¾ Part 3: Characterization as received¾ Part 4: Determination of consistency of castables¾ Part 5: Preparation and treatment of test pieces¾ Part 6: Measurement of physical properties¾ Part 7: Tests on pre-formed shapes¾ Part 8: Determination of complementary propertiesAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, S
...